Important notice: Due to COVID-19 our costs for importing products to Europe have increased tremendously. Therefore, an additional freight cost surcharge of 11.50 Euros per delivery will be invoiced from May 1st, 2020 temporally. Find further information here.

Please assist us in our effort to improve this site.
Please give us a feedback on the MISUMI e-Catalog.
Your feedback

Your name (on a voluntary basis)

Your email address (on a voluntary basis)

Your phone number (on a voluntary basis)

We are sorry, but we cannot respond on each feedback.

Private and customer information will remain confidential in accordance with our privacy policy.
Thank you for your cooperation.

We are sorry, but we cannot respond on each feedback.
If you wish to receive our response,please use the inquiry form.

Private and customer information will remain confidential in accordance with our privacy policy.

Electric Discharge Jigs

Electric discharge jigs are jigs that hold workpieces and are used for electric discharge machining in metalworking. Electric discharge machining is a method of mechanical machining to remove part of the surface of a workpiece by repeated arc discharging between electrodes and the workpiece in short cycles. It is mainly applied to hard metals that could not be machined with conventional mechanical machining. Electric discharge machining can be used to easily cut and machine hard steel and titanium. However, electric discharge machining can only be used on materials that conduct electricity. Also, it must be noted that small cracks and scratches easily occur on the machined surface due to residual stress being generated by electric discharge machining. Jigs and holders are used in order not to put a burden on workers from electric discharge machining or cracks and the like.

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 11 Days or Less 19 Days or Less

?* Information on days to ship

Macro Manual Chuck 75φ

SYSTEM 3R

Chuck that uses an adapter plate to mount to machine spindles or machine tables

[Features]
· Cast chuck that can be mounted to machine spindles or to jigs on machine tables using 3R-A11489.
· Polished back face

Starting from^∗ ：	1,573.75 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Macro Base Holder, Set of 8

Macro Base Holder, Set of 8【8 Pieces Per Package】

SYSTEM 3R

Can be used as a 54 x 54 x 12.5 mm holder master electrode or for component machining. Mount by using M6 screws in 4 places

[Features]
· Base element for 54 x 54 mm copper electrodes and workpieces. Hardened

Volume Discount

Starting from^∗ ：	375.53 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Macro Manual Chuck 100φ

SYSTEM 3R

Return the adapter plate and install to the table of a cutting machine

[Features]
· A cast manual chuck with the external dimensions of φ100, the same as the automatic chuck.
· Using the 3R-A26488 mounting flange, it can be mounted on top of a machine table.

Volume Discount

Starting from^∗ ：	1,738.49 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Electrode Side Probe

SYSTEM 3R

Electrode-side probe. It is used to position workpieces and measure electrode displacement

Starting from^∗ ：	1,344.21 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Macro Pallet Holder 70 x 70

SYSTEM 3R

70 x 70 x 12.5 mm precision cast holder made of SUS. Used for pallets for workpieces and dedicated jigs

[Features]
· Precision cast product with 8 mounting screw holes included. Hardened

Starting from^∗ ：	267.10 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Macro Magnum Manual Chuck

SYSTEM 3R

Provides stable rigidity and accuracy thanks to the high clamping force and widely separated reference plane position

Volume Discount

Starting from^∗ ：	4,694.96 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Universal Holder for Electrode, Standard Model (Includes Adjustment Function for Vertical Inclination / Rotation Function for Rotation Orientation)

MISUMI

3 types available depending on application. Electro holder with adjustment function

Volume Discount

Starting from^∗ ：	864.41 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

Universal Holder for Electrode, XY Center Adjustment Function Model (Collet Chuck Model)

MISUMI

The XY centering function brings about dramatically increased freedom during machining

Volume Discount

Starting from^∗ ：	1,313.56 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

Super Vise 0-100 mm

SYSTEM 3R

Ideal for clamping small articles up to 100 mm. As it uses the clamp system from the side, there will be no interference of the lower wire guide

[Features]
· Horizontal clamping vise suitable for small articles/square objects up to 100 mm

Starting from^∗ ：	4,684.45 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Macro Manual Lever Chuck

SYSTEM 3R

Used in wire electric discharge machines. Rustproof macro manual chuck. The clamp can be engaged with a single action using the lever

[Features]
· The clamp installs horizontally to a machine table with a single touch of the lever. With dropper

Starting from^∗ ：	3,701.65 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Macro Leveling Head HP

SYSTEM 3R

Macro type level adjustable jig for wire electric discharge machines. It is used in combination with Super Vise, etc. Perfect for Clamping Small Workpieces

[Features]
· Leveling is possible by attaching a super vise, holder, or jig to a micro system.
· 3-directional level adjustments are possible.
· Automatic exchange is supported.
· Suitable for a cord carrier.
· Recommended Maximum Load 15 kg, Weight 2.4 kg

Starting from^∗ ：	4,238.51 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Long Drawbar

SYSTEM 3R

Drawbar for auto chuck. Easy to attach and remove, and chucking accuracy is maintained through a floating mechanism.

Starting from^∗ ：	153.76 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

HP Magnum Vise

SYSTEM 3R

Suitable for work clamps up to 155 mm. Used together with a leveling head. Optimal for Medium-Sized Plate Processing

[Features]
· Horizontal clamping vise suitable for square objects up to 155 mm

Starting from^∗ ：	6,370.31 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Leveling Head HP

SYSTEM 3R

Dovetail groove type level adjustable jig for wire electric discharge machines. It is used in combination with Super Vise, etc. Perfect for Clamping Small Workpieces

[Features]
· The level can be adjusted by manually installing a Super Vise, holder or jig on the wire system

Starting from^∗ ：	4,065.88 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Magnetic Rod

NEW STRONG

[Features]
· Convenient for picking screws and accessories that have fallen into a narrow place.
· LMB-650 with attached light is convenient for searching for objects in dark places.
· Tremendously useful for searching for screws or small articles in lateral grooves due to its bendable tip (MSB-150M). (MSB-150, LMB-650) comes in a plastic case

Starting from^∗ ：	9.37 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Finger Holder For Wire-Cut Electric Discharge Machining (Without Adjustment Function)

SAKAESEIKI

[Features]
· For use with single pieces or multiple pieces, this accessory enables clamping of various shapes and sizes of workpieces for wire-cut electric discharge machining.
· Enables reversible use for work table 0 line machining and machining to prevent interference with the machine lower nozzle.
· Various types of workpieces such as square, round, large and small can be clamped.

Starting from^∗ ：	303.90 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Short Dropper

SYSTEM 3R

Drawbar for manual chuck. Has a floating function, and is easy to attach and remove.

Starting from^∗ ：	135.73 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Magnum Pallet Holder 142φ

SYSTEM 3R

142ø x 12.5 mm base holder. Mount on dedicated jig or vise. Replacement is easy

[Features]
· Hardened Base Element Provided with Mounting Screw Holes

Starting from^∗ ：	1,005.71 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Electrode Cassette

Electrode Cassette【5 Pieces Per Package】

SYSTEM 3R

The electrodes can be stored stacked. 8 electrodes can be mounted on 1 pallet. One pallet includes 5 sets

[Features]
· For 8 electrodes 52 x 52 and 54 x 54 mm

Starting from^∗ ：	196.66 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Floating Holder

SYSTEM 3R

[Features]
· Tilt adjustment jig that can be adjusted up to 3° on the X, Y and C axes. 20ø bars will be fixed with set screws from the side.
· It comes with an optional V-block holder (3R-SP4532).

Starting from^∗ ：	1,560.60 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Macro Manual Chuck with φ75 Boss

SYSTEM 3R

A chuck mounted on a machine spindle and cutting machine table. With bosses on back

[Features]
· A cast chuck that's attached to a machine table using a machine spindle, jig or 3R-A19724. A mounting flange is included.

Volume Discount

Starting from^∗ ：	1,979.49 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Macro Square Electrode Holder

Macro Square Electrode Holder【8 Pieces Per Package】

SYSTEM 3R

Square/round electrode holder for 30 mm or smaller sizes. Used by mounting to a micro base holder

[Features]
· For square/round electrodes of 30 mm or smaller.
· It is not hardened.
· Can be mounted to 3R-651, 7E-S or 3R-651, 7E-XS.
· It supports a cord carrier.
· Jet duct.
· 8 pieces per set.
· Weight of 1 set: 5.5 kg

Starting from^∗ ：	539.81 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Macro Base Holder HP

SYSTEM 3R

54 x 54 x 12.5 mm precision cast holder made of SUS. It is used for palletizing dedicated jigs for fixing workpieces

[Features]
· Precision cast product with 4 mounting screw holes included.
· Hardened

Starting from^∗ ：	168.15 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Macro Plate Electrode Holder

Macro Plate Electrode Holder【8 Pieces Per Package】

SYSTEM 3R

U-shape electrode holder for electrodes up to 30 mm thick. Used by mounting to a micro base holder

[Features]
· For electrode plates up to 30 mm thick.
· It is not hardened.
· Can be mounted to 3R-651, 7E-S or 3R-651, 7E-XS.

Starting from^∗ ：	538.82 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Magnetic Cleaner

NEW STRONG

Resolves troublesome cutting chips and sludge processing in oil/water tanks of machine tools

[Features]
· Made entirely from stainless steel, it is extremely durable.
· The tip is non-magnetic with sealed magnets and the removal of chips or sludge can be performed easily.
· Even when chips or sludge have adhered to the body, they can be easily removed with a spatula.
· Cover can be washed with water or an air gun to remove contaminants.
· Can be installed in a narrow place

Volume Discount

Starting from^∗ ：	187.07 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Magnetic Cleaner

NEW STRONG

[Features]
· The main body has a vane shape with a large adsorption area. Circulating oil readily forms vortices and efficiently adheres to the surface.
· Iron filings, chips, etc., that have adhered can be easily disposed of by simply removing the cover.
· A magnet is placed at the bottom of the main body, so it will not be washed into the circulating oil.
· Can also be attached to the oil tank using the magnet at the bottom

Volume Discount

Starting from^∗ ：	88.95 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Magnetic Sweeper

NEW STRONG

Ideal for removing chips and sludge accumulated in water tanks / oil tanks and near machines

Volume Discount

Starting from^∗ ：	156.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Mirror Bar

NEW STRONG

The rear sides of machines, which are not usually visible, can be viewed in the reflection on the mirror. The mirror is attached to the edge of the telescoping bar and the shaft can be bent

Volume Discount

Starting from^∗ ：	14.71 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

EDM Vise

NEW STRONG

[Features]
· Stainless vise for wire electric discharger.
· Moves 45 degrees diagonally during clamping, suppressing workpiece lift.
· Weight Approx. 2.5 kg

Starting from^∗ ：	720.61 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Fine Adjustment Wire-Cut Pallet

SAKAESEIKI

[Features]
· Suitable for thin workpiece clamps.

Starting from^∗ ：	2,209.19 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Wire-Cut Vise

SAKAESEIKI

[Features]
· Equipped with lower stopper (removable) facilitating easy workpiece setting.
· Able to use for both right and left cutting direction.

Starting from^∗ ：	1,656.93 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Stainless Steel Wire-Cut Clamp

Stainless Steel Wire-Cut Clamp【1-2 Pieces Per Package】

SAKAESEIKI

[Features]
· Can be used for both right and left (K-75) cutting direction.
· Goes with workpieces for grinding finish.
· Less deformation during tightening for hardening.

Starting from^∗ ：	85.07 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Finger Holder For Wire-Cut Electric Discharge Machining (With Adjustment Function)

SAKAESEIKI

Starting from^∗ ：	694.42 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days


Brand	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	MISUMI	MISUMI	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	NEW STRONG	SAKAESEIKI	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	SYSTEM 3R	NEW STRONG	NEW STRONG	NEW STRONG	NEW STRONG	NEW STRONG	SAKAESEIKI	SAKAESEIKI	SAKAESEIKI	SAKAESEIKI
Product Series	Macro Manual Chuck 75φ	Macro Base Holder, Set of 8【8 Pieces Per Package】	Macro Manual Chuck 100φ	Electrode Side Probe	Macro Pallet Holder 70 x 70	Macro Magnum Manual Chuck	Universal Holder for Electrode, Standard Model (Includes Adjustment Function for Vertical Inclination / Rotation Function for Rotation Orientation)	Universal Holder for Electrode, XY Center Adjustment Function Model (Collet Chuck Model)	Super Vise 0-100 mm	Macro Manual Lever Chuck	Macro Leveling Head HP	Long Drawbar	HP Magnum Vise	Leveling Head HP	Magnetic Rod	Finger Holder For Wire-Cut Electric Discharge Machining (Without Adjustment Function)	Short Dropper	Magnum Pallet Holder 142φ	Electrode Cassette【5 Pieces Per Package】	Floating Holder	Macro Manual Chuck with φ75 Boss	Macro Square Electrode Holder【8 Pieces Per Package】	Macro Base Holder HP	Macro Plate Electrode Holder【8 Pieces Per Package】	Magnetic Cleaner	Magnetic Cleaner	Magnetic Sweeper	Mirror Bar	EDM Vise	Fine Adjustment Wire-Cut Pallet	Wire-Cut Vise	Stainless Steel Wire-Cut Clamp【1-2 Pieces Per Package】	Finger Holder For Wire-Cut Electric Discharge Machining (With Adjustment Function)
Starting from^∗	1,573.75 € *Unit price with basic configuration	375.53 € *Unit price with basic configuration Volume Discount	1,738.49 € *Unit price with basic configuration Volume Discount	1,344.21 € *Unit price with basic configuration	267.10 € *Unit price with basic configuration	4,694.96 € *Unit price with basic configuration Volume Discount	864.41 € *Unit price with basic configuration Volume Discount	1,313.56 € *Unit price with basic configuration Volume Discount	4,684.45 € *Unit price with basic configuration	3,701.65 € *Unit price with basic configuration	4,238.51 € *Unit price with basic configuration	153.76 € *Unit price with basic configuration	6,370.31 € *Unit price with basic configuration	4,065.88 € *Unit price with basic configuration	9.37 € *Unit price with basic configuration	303.90 € *Unit price with basic configuration	135.73 € *Unit price with basic configuration	1,005.71 € *Unit price with basic configuration	196.66 € *Unit price with basic configuration	1,560.60 € *Unit price with basic configuration	1,979.49 € *Unit price with basic configuration Volume Discount	539.81 € *Unit price with basic configuration	168.15 € *Unit price with basic configuration	538.82 € *Unit price with basic configuration	187.07 € *Unit price with basic configuration Volume Discount	88.95 € *Unit price with basic configuration Volume Discount	156.82 € *Unit price with basic configuration Volume Discount	14.71 € *Unit price with basic configuration Volume Discount	720.61 € *Unit price with basic configuration	2,209.19 € *Unit price with basic configuration	1,656.93 € *Unit price with basic configuration	85.07 € *Unit price with basic configuration	694.42 € *Unit price with basic configuration
Min. Shipping Days	8 Days	Same day	9 Days	9 Days	4 Days	9 Days	11 Days	11 Days	8 Days	9 Days	9 Days	4 Days	9 Days	9 Days	Same day	9 Days	4 Days	9 Days	8 Days	4 Days	8 Days	8 Days	4 Days	4 Days	Same day	Same day	6 Days	5 Days	7 Days	9 Days	9 Days	4 Days	9 Days