Shipping Days |
|
---|
?* Information on days to ship
ANEX
[Features]
· A replacement type screwdriver which can be used with a screwdriver bit (subtense 6.35 mm hex shaft).
· The rear end of the handle can be used for turning eye bolts and thumb screws.
· The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.
[Applications]
· + No. 2, -6 screwdriver
· Piston Rotation
· Wiring remover to be inserted in the terminal removing hole
Starting from∗ : | 5.88 € |
---|---|
Min. Shipping Days : | 15 Days |
*Unit price with basic configuration
ENGINEER
2-in-1, Phillips and flathead 2-way mini-screwdriver.
[Features]
· +/- 2-WAY 2-in-1 bit.
· 42 mm long ultra compact design is ideal for work in narrow spaces.
· Screwdriver tip has been magnetized.
[Applications]
· Optimal for work in narrow locations where ordinary screwdrivers cannot reach.
Starting from∗ : | 3.76 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
ANEX
[Features]
It is best suitable for screw removing work that requires power.
You can select from the two types, either the straight type or T type, with one screwdriver.
Starting from∗ : | 48.50 € |
---|---|
Min. Shipping Days : | 14 Days |
*Unit price with basic configuration
SUEKAGE TOOL
A compact design optimal for portability. The mini ratchet has a gear with 52 teeth, which results in a brisk rotation that increases work productivity. Includes a rotating plastic case that can be opened and closed compactly.
Starting from∗ : | 37.76 € |
---|---|
Min. Shipping Days : | 14 Days |
*Unit price with basic configuration
MAEDAKINNZOKU
As the axis is of four-square shape, strong tightening is possible when combining the use of adjustable wrench and spanner. The tip is equipped with a strong magnet.
Starting from∗ : | 4.79 € |
---|---|
Min. Shipping Days : | 15 Days |
*Unit price with basic configuration
MAEDAKINNZOKU
As the axis is of four-square shape, strong tightening is possible when combining the use of adjustable wrench and spanner. The tip is equipped with a strong magnet.
Starting from∗ : | 45.75 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
HOZAN
Impact screwdriver with interchangeable left and right rotation.
[Features]
· Driver bit rotates at high torque when hit with a hammer, loosening rusted screws easily.
· Protective grip with collar to protect the hand holding the driver.
· A 12.7 mm square socket can be attached by removing the bit holder.
· Case included
[Applications]
· Ideal for turning screws that are difficult to loosen.
Starting from∗ : | 82.28 € |
---|---|
Min. Shipping Days : | 13 Days |
*Unit price with basic configuration
Starting from∗ : | 9.64 € |
---|---|
Min. Shipping Days : | 13 Days |
*Unit price with basic configuration
ANEX
[Features]
-21 mm wide ultra thin type.
With the super-thin head type ratchet mechanism adopted, it can work in much narrower spaces.
By the magnet type chucking, the bit can be easily put on and taken off.
Ultra-short bit (total length 19 mm) is adopted.
[Applications]
- For screw removal work and other work in tight spaces.
Starting from∗ : | 10.41 € |
---|---|
Min. Shipping Days : | 14 Days |
*Unit price with basic configuration
KTC(KYOTO TOOL)
[Features]
With the ratchet mechanism, you can fast forward in tightening or loosening of screws.
By fixing the ratchet, you can also use it as a normal driver.
It can accommodate 2-axis, 6 grip end and 8-bit.
[Applications]
- General-purpose Tools
Starting from∗ : | 45.11 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
KTC(KYOTO TOOL)
[Features]
With the ratchet mechanism, you can fast forward in tightening or loosening of screws.
By fixing the ratchet, you can also use it as a normal driver.
[Applications]
- General-purpose Tools
Starting from∗ : | 41.70 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
ENGINEER
[Features]
· Pocket-sized precision screwdriver.
· Machine-knurled fine shaft for excellent workability in recesses.
[Applications]
· For small precision screws used in time pieces, cameras, glasses, etc.
Starting from∗ : | 10.01 € |
---|---|
Min. Shipping Days : | 4 Days |
*Unit price with basic configuration
MAEDAKINNZOKU
As the axis is of four-square shape, strong tightening is possible when combining the use of adjustable wrench and spanner. The tip is equipped with a strong magnet.
Starting from∗ : | 9.58 € |
---|---|
Min. Shipping Days : | 19 Days |
*Unit price with basic configuration
MAEDAKINNZOKU
The overall length of 380 mm, ideal for working in places that standard types cannot reach. As the axis is of four-square shape, strong tightening is possible when combining the use of adjustable wrench and spanner. The tip is equipped with a strong magnet.
Starting from∗ : | 15.15 € |
---|---|
Min. Shipping Days : | 19 Days |
*Unit price with basic configuration
MAEDAKINNZOKU
The overall length of 380 mm, ideal for working in places that standard types cannot reach. As the axis is of four-square shape, strong tightening is possible when combining the use of adjustable wrench and spanner. The tip is equipped with a strong magnet.
Starting from∗ : | 15.15 € |
---|---|
Min. Shipping Days : | 19 Days |
*Unit price with basic configuration
Starting from∗ : | 3.97 € |
---|---|
Min. Shipping Days : | 13 Days |
*Unit price with basic configuration
Starting from∗ : | 3.85 € |
---|---|
Min. Shipping Days : | 19 Days |
*Unit price with basic configuration
Starting from∗ : | 3.97 € |
---|---|
Min. Shipping Days : | 15 Days |
*Unit price with basic configuration
MAEDAKINNZOKU
As the axis is of four-square shape, strong tightening is possible when combining the use of adjustable wrench and spanner. The tip is equipped with a strong magnet.
Starting from∗ : | 4.79 € |
---|---|
Min. Shipping Days : | 19 Days |
*Unit price with basic configuration
MAEDAKINNZOKU
As the axis is of four-square shape, strong tightening is possible when combining the use of adjustable wrench and spanner. The tip is equipped with a strong magnet.
Starting from∗ : | 9.58 € |
---|---|
Min. Shipping Days : | 19 Days |
*Unit price with basic configuration
MAEDAKINNZOKU
As the axis is of four-square shape, strong tightening is possible when combining the use of adjustable wrench and spanner. The tip is equipped with a strong magnet.
Starting from∗ : | 6.60 € |
---|---|
Min. Shipping Days : | 15 Days |
*Unit price with basic configuration
Starting from∗ : | 26.29 € |
---|---|
Min. Shipping Days : | 13 Days |
*Unit price with basic configuration
MAEDAKINNZOKU
As the axis is of four-square shape, strong tightening is possible when combining the use of adjustable wrench and spanner. The tip is equipped with a strong magnet.
Starting from∗ : | 6.60 € |
---|---|
Min. Shipping Days : | 15 Days |
*Unit price with basic configuration
Starting from∗ : | 3.87 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
MAEDAKINNZOKU
The overall length of 380 mm, ideal for working in places that standard types cannot reach. As the axis is of four-square shape, strong tightening is possible when combining the use of adjustable wrench and spanner. The tip is equipped with a strong magnet.
Starting from∗ : | 45.55 € |
---|---|
Min. Shipping Days : | Quote |
*Unit price with basic configuration
ENGINEER
Ballpoint type screwdriver.
[Features]
· Enables tightening from an angle of around 30°.
· The shaft is made from a high-carbon steel.
· Surface processing of screwdriver shaft is non-electrolytic nickel plating.
[Applications]
· Ideal for assembly and maintenance work.
Starting from∗ : | 5.29 € |
---|---|
Min. Shipping Days : | 8 Days |
*Unit price with basic configuration
ENGINEER
Ball screwdriver set enabling tightening from an angle of around 30°.
[Features]
· Tightening is possible even at about a 30° tilt thanks to the ballpoint shape.
· The shaft is made from a high-carbon steel.
· Surface processing of screwdriver shaft is non-electrolytic nickel plating.
[Applications]
· Ideal for assembly and maintenance work.
Starting from∗ : | 21.93 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
ENGINEER
Master grip screwdriver set equipped with frequently used magnetized strong bits.
[Features]
· Bit set that is also ideal for rechargeable or electric screwdrivers.
· The bit is made of chrome vanadium steel.
· Burette type bit holder for convenient mobility.
· A cushioned grip which fits well into the hand.
[Applications]
· For tightening and removing various screws.
Starting from∗ : | 23.99 € |
---|---|
Min. Shipping Days : | 13 Days |
*Unit price with basic configuration
ENGINEER
2-in-1, Phillips and flathead 2-way screwdriver.
[Features]
· Cushion grip which fits the hands.
· Various bits can be used, such as for electric screwdrivers and pneumatic screwdrivers.
· Both ends magnetized.
[Applications]
· For tightening and removing various screws.
Starting from∗ : | 10.40 € |
---|---|
Min. Shipping Days : | 8 Days |
*Unit price with basic configuration
ENGINEER
Screwdriver with hexagonal tip.
[Features]
· Sizes available for any size hex socket screw.
· The shaft is chrome-molybdenum steel.
[Applications]
· For tightening and removing hex socket screws.
Starting from∗ : | 1.50 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
Starting from∗ : | 15.98 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
ANEX
[Features]
· A high-strength type with an elastomer resin handle.
· A precision screwdriver with a long shaft.
Starting from∗ : | 3.99 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
ANEX
[Features]
The 60-gear 6 ratchet mechanism is incorporated.
The ball-shaped handle made of elastomer resin is easy to apply the force.
The insertion angle is 6.35 mm.
-Driver bit with magnet.
Starting from∗ : | 13.61 € |
---|---|
Min. Shipping Days : | 15 Days |
*Unit price with basic configuration
ANEX
[Features]
· A single ratchet driver capable of turning 4 types of screws, (+) No.1, (+) No.2, (+) No. 3 and (-) 6.
· The ratchet mechanism makes it possible to fasten screws with one hand.
[Applications]
· For screw removal work, etc.
Starting from∗ : | 7.86 € |
---|---|
Min. Shipping Days : | 15 Days |
*Unit price with basic configuration
ANEX
[Features]
Opposite side 8mm hexagonal axis, head-bit support.
Starting from∗ : | 1.80 € |
---|---|
Min. Shipping Days : | 14 Days |
*Unit price with basic configuration
HIRAI KOGU
[Features]
· Wide-type tip allows rotation of large screws that can only be rotated using large flathead screwdrivers.
· Can be used to rotate plastic screws, etc. without damaging them.
· A square shaft type that can be clamped on with pliers or a monkey wrench.
[Applications]
· For automobiles, panels for trains, large buses, etc.
· Attachment/detachment of check valve with mixing faucet strainer.
Starting from∗ : | 9.92 € |
---|---|
Min. Shipping Days : | 14 Days |
*Unit price with basic configuration
TRUSCO NAKAYAMA
[Features]
It allows tightening even from a slant of about 25 ° by ball point shape.
Starting from∗ : | 8.64 € |
---|---|
Min. Shipping Days : | 14 Days |
*Unit price with basic configuration
EIGHT TOOL
[Features]
· Handle employs a high-quality acetate resin which feels good to the touch and is shock resistant.
· It is designed for professionals so as to exceed ISO and JIS standards.
[Applications]
· For tightening hex socket head bolts.
Starting from∗ : | 8.32 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
PB SWISS TOOLS
A screwdriver with excellent impact resistance of 1 t or higher. It is also resistant to oil and gasoline.
[Features]
· It can be used for general applications. Recyclable clip. Boasts an extremely high finishing dimensional accuracy of 1/100 mm.
· The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
· The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
· Gentle to the skin and comfortably gripped. Vanilla aromas are blended to suppress smells.
· Blade is nickel chrome-plated. Has excellent rust-resistance and long life.
· The edge is lightly corner-cut, allowing the wrench to be easily inserted into screw holes.
[Applications]
· Ideal for manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.
Starting from∗ : | 10.40 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
PB SWISS TOOLS
A long screwdriver with excellent impact resistance of 1 t or higher. It is also resistant to oil and gasoline.
[Features]
· It can be used for general applications. Recyclable clip. Boasts an extremely high finishing dimensional accuracy of 1/100 mm.
· The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
· The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
· Gentle to the skin and comfortably gripped. Vanilla aromas are blended to suppress smells.
· Blade is nickel chrome-plated. Has excellent rust-resistance and long life.
· The edge is lightly corner-cut, allowing the wrench to be easily inserted into screw holes.
[Applications]
· Ideal for manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.
Starting from∗ : | 11.46 € |
---|---|
Min. Shipping Days : | 13 Days |
*Unit price with basic configuration
PB SWISS TOOLS
A screwdriver with excellent impact resistance of 1 t or higher. It is also resistant to oil and gasoline.
[Features]
· It can be used for general applications. Recyclable clip.
· The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
· The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
· Gentle to the skin and comfortably gripped. Vanilla aromas are blended to suppress smells.
· With a precision ball point, screws on angled surfaces up to a 30° incline can be rotated.
[Applications]
· Ideal for manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.
* Cannot be used for final tightening.
Starting from∗ : | 15.95 € |
---|---|
Min. Shipping Days : | 13 Days |
*Unit price with basic configuration
Starting from∗ : | 143.79 € |
---|---|
Min. Shipping Days : | 13 Days |
*Unit price with basic configuration
Starting from∗ : | 146.93 € |
---|---|
Min. Shipping Days : | 14 Days |
*Unit price with basic configuration
PB SWISS TOOLS
Hex bar screwdriver made from 2 new materials: polypropylene and santoprene.
[Features]
· The symbol and size of the driver tip shape are shown on the rear of the handle.
· A screwdriver suited for the task can be selected quickly. Boasts an extremely high finishing dimensional accuracy of 1/100 mm.
· The handle shape features the same ergonomic design as the Multi-craft.
· The carefully selected surface material is close to the hardness of human hands, making it feel soft and warm.
· With a special surface structure, the handle can be grasped firmly even with wet hands.
· Resistant to oil and gasoline, allowing it to be easily cleaned. Heat resistance of 140°C.
[Applications]
· Convenient for high-tech fields, assembly lines, and home use. Ideal for rapid turning.
Starting from∗ : | 28.50 € |
---|---|
Min. Shipping Days : | 13 Days |
*Unit price with basic configuration
KTC(KYOTO TOOL)
[Features]
Ratchet operation in both directions is possible by switching lever.
It is possible to fast forward by turning the gear at your fingertips.
-6.3 mm subtense bits can be used.
Starting from∗ : | 15.70 € |
---|---|
Min. Shipping Days : | 14 Days |
*Unit price with basic configuration
Brand |
---|
Product Series |
Starting from∗ |
Min. Shipping Days |
Tip standards |
Tip size / Phillips (+) |
Tip size / flathead (-) blade width (mm) B1 |
Shaft length L (mm) |
Single Product/Set Classification |
Shaft type |
Magnet |
Shaft through |
Bolster |
Grip Type |
Tip size / flathead (-) blade thickness (mm) B2 |
(Box/Hex/Ball-Point) Width Across Flats (mm) |
(Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
Brand | ANEX | ENGINEER | ANEX | SUEKAGE TOOL | MAEDAKINNZOKU | MAEDAKINNZOKU | HOZAN | MAEDAKINNZOKU | ANEX | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | ENGINEER | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ANEX | ANEX | ANEX | ANEX | HIRAI KOGU | TRUSCO NAKAYAMA | EIGHT TOOL | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | KTC(KYOTO TOOL) |
Product Series | Interchangeable Screwdriver/Interchangeable Mini Star Screwdriver | ||||||||||||||||||||||||||||||||||||||||||||
Starting from∗ | 5.88 € *Unit price with basic configuration | 3.76 € *Unit price with basic configuration | 48.50 € *Unit price with basic configuration | 37.76 € *Unit price with basic configuration | 4.79 € *Unit price with basic configuration | 45.75 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 82.28 € *Unit price with basic configuration | 9.64 € *Unit price with basic configuration | 10.41 € *Unit price with basic configuration | 45.11 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 41.70 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 10.01 € *Unit price with basic configuration Volume Discount | 9.58 € *Unit price with basic configuration | 15.15 € *Unit price with basic configuration | 15.15 € *Unit price with basic configuration | 3.97 € *Unit price with basic configuration | 3.85 € *Unit price with basic configuration | 3.97 € *Unit price with basic configuration | 4.79 € *Unit price with basic configuration | 9.58 € *Unit price with basic configuration | 6.60 € *Unit price with basic configuration | 26.29 € *Unit price with basic configuration | 6.60 € *Unit price with basic configuration | 3.87 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022 | 45.55 € *Unit price with basic configuration | 5.29 € *Unit price with basic configuration | 21.93 € *Unit price with basic configuration | 23.99 € *Unit price with basic configuration | 10.40 € *Unit price with basic configuration Volume Discount | 1.50 € *Unit price with basic configuration | 15.98 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 3.99 € *Unit price with basic configuration | 13.61 € *Unit price with basic configuration | 7.86 € *Unit price with basic configuration Volume Discount | 1.80 € *Unit price with basic configuration Volume Discount | 9.92 € *Unit price with basic configuration | 8.64 € *Unit price with basic configuration | 8.32 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 10.40 € *Unit price with basic configuration | 11.46 € *Unit price with basic configuration | 15.95 € *Unit price with basic configuration | 143.79 € *Unit price with basic configuration | 146.93 € *Unit price with basic configuration | 28.50 € *Unit price with basic configuration | 15.70 € *Unit price with basic configuration Volume Discount |
Min. Shipping Days | 15 Days | 6 Days | 14 Days | 14 Days | 15 Days | Same day | 13 Days | 13 Days | 14 Days | Same day | Same day | 4 Days | 19 Days | 19 Days | 19 Days | 13 Days | 19 Days | 15 Days | 19 Days | 19 Days | 15 Days | 13 Days | 15 Days | Same day | Quote | 8 Days | 6 Days | 13 Days | 8 Days | 6 Days | Same day | Same day | 15 Days | 15 Days | 14 Days | 14 Days | 14 Days | Same day | Same day | 13 Days | 13 Days | 13 Days | 14 Days | 13 Days | 14 Days |
Tip standards | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Combination | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) / Combination | Combination | Box / Combination | Phillips (+) / Phillips (+)/Flathead(-) | Phillips (+) | Flathead (-) | Phillips (+) | Flathead (-) | Flathead (-) | Phillips (+) | Flathead (-) | Flathead (-) | Phillips (+) | Flathead (-) | Flathead (-) | Phillips (+) | Phillips (+)/Flathead(-) | Ballpoint | Ballpoint | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Hexagon | Hexagon | Ballpoint | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) | Flathead (-) | Ballpoint | Hexagon | Hexagon | Hexagon | Ballpoint | Combination | Combination | Hexagon | Phillips (+) / Combination |
Tip size / Phillips (+) | No. 2 | No. 1 / No. 2 | No. 1 / No. 2 / No. 3 | No. 1 / No. 2 / No. 3 | No. 1 | No. 1 / No. 2 / No. 3 | No. 2 / No. 3 / No. 4 | No. 2 | No. 1 / No. 2 / No. 3 | No. 1 / No. 2 / No. 3 | No. 2 | No. 000 / No. 00 / No. 0 / No. 1 / Other | No. 3 | - | No. 2 / No. 3 | - | - | No. 2 | - | - | No. 2 | - | - | No. 1 / No. 2 | No. 2 / No. 3 | - | - | No. 0 / No. 1 / No. 2 | No. 2 | - | - | - | No. 2 | No. 1 / No. 2 / No. 3 | No. 2 | - | - | - | - | - | - | No. 1 / No. 2 / No. 3 | No. 1 / No. 2 / No. 3 | - | No. 2 / No. 3 |
Tip size / flathead (-) blade width (mm) B1 | 6 | 4.5 ~ 6 | 6 | 5 | - | 4.9 ~ 9 | 10 | 7.2 | 6 | 5.5 ~ 8 | 6 | 2.4 | - | 9 | - | 7.2 | 7.2 | - | 4.9 | 9 | - | 10 | 6 | - | 9 | - | - | 6 | 6 | - | - | - | 6 | 6 | - | 18 | - | - | - | - | - | 4 ~ 8 | 4 ~ 8 | - | - |
Shaft length L (mm) | 135 | 16 | - | - | 76 | 76 ~ 153 | 36 ~ 80 | 14 | - | - | - | - | 153 | 275 | 275 | 23 | 14 | 23 | 76 | 153 | 102 | 150 | 102 | 14 | 275 | 100 | 70 ~ 120 | - | 90 | 90 | 90 | 75 | 95 | 28 ~ 93 | - | 75 | 180 | 70 ~ 110 | 50 | 120 ~ 280 | 80 ~ 120 | - | - | 180 | - |
Single Product/Set Classification | Single Item | Single Item | Set Product | Set Product | Single Item | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Set Product | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item / Set Product | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item / Set Product |
Shaft type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Magnet | Available | Available | N/A | N/A | Available | Available | N/A | Available | N/A | N/A | N/A | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | N/A | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | N/A | Available | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
Shaft through | - | - | - | N/A | Available | Available | - | N/A | - | - | - | - | Available | Available | Available | N/A | N/A | N/A | Available | Available | Available | Available | Available | N/A | Available | N/A | N/A | - | - | N/A | N/A | N/A | - | - | - | N/A | N/A | N/A | N/A | N/A | N/A | - | - | N/A | - |
Bolster | - | - | - | N/A | N/A | N/A | - | N/A | - | - | - | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | - | N/A | N/A | N/A | - | - | - | N/A | N/A | N/A | N/A | N/A | N/A | - | - | N/A | - |
Grip Type | Rubber | Resin | Resin | - | Resin | Resin | Rubber | Resin | Stainless Steel | Rubber | Rubber | - | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Rubber | Resin | Resin | Resin | Rubber | Rubber | - | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Stainless Steel |
Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | 0.6 ~ 1 | - | 0.8 | - | - | - | 0.3 ~ 0.6 | - | 1 | - | 0.8 | 0.8 | - | 0.6 | 1 | - | 1.2 | 0.8 | - | 1 | - | - | - | - | - | - | - | - | - | - | 1.8 | - | - | - | - | - | 0.6 ~ 1.2 | 0.6 ~ 1.2 | - | - |
(Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | 4 ~ 6 | 4 ~ 6 | - | - | - | - | 2.5 ~ 6 | 2.5 ~ 5 | 1.5 ~ 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 | 1.5 ~ 4 | - | - | 1.5 ~ 2.5 | 1.5 ~ 5 | 2 ~ 3 | - | - | - | - | 8 | 2 ~ 6 | 1.27 | 2 ~ 6 | 2 ~ 4 | 2.5 ~ 6 | 2.5 ~ 6 | 8 | 4 ~ 6 |
(Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Please assist us in our effort to improve this site.
Please give us a feedback on the MISUMI e-Catalog.
Thank you for your cooperation.
If you wish to receive our response,please use the inquiry form.