Tweezers, circuit board tools（Page 2）

?* Information on days to ship and prices

• 

  Plastic Tweezers, Loimer, Total Length (mm) 120

  AS ONE

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  General Purpose Tweezers, Overall Length (mm) 160 / 185

  AS ONE

  The product features superior electrical insulation and heat resistance. Suitable for electrode insulation of lithium ion secondary batteries.

  Select to compare

  Configure now
  Starting from∗ ：	78.01 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Replacement Type Tweezers

  LINDSTROM

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	71.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Precision Tweezers (ESD Specification)

  LINDSTROM

  [Features]
  · Electrostatic discharge (ESD) specifications.
  · Non-magnetic.
  [Applications]
  · For electronic work.
  · For fine work.
  · For precision work.
  [Material]
  · Stainless steel

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	28.73 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  HS-401 Hot Tweezers

  AS ONE

  [Features]
  · Mirror with high reflectance that broadly covers the ultraviolet or infrared ranges in addition to the visible range.
  · It can be used for spectroscopic experiments including invisible light and propagation of black body radiation spectrum.
  · Higher reflectance than metal film mirrors can be obtained even in ultraviolet and infrared areas.
  · As a dielectric multilayer mirror, its mirror surface is not easily scratched and can be cleaned.
  · Because the film is not absorbent, it does not change over time and can withstand continuous laser irradiation.
  · A surface accuracy guaranteed mirror (HTFM) that guarantees its surface accuracy after coating is also available.
  · * Reflection wavelength characteristics may vary depending on the polarization state of incident beams for dielectric multi-layer film.
  · * P polarization has lower reflectance and a narrower reflection band than S polarization.
  · * Reflectance for the specification shows average reflectance values of P polarization and S polarization.
  · * Mirror surface has metallic gloss, but does not use metal.
  · * Be careful to avoid confusion with metal film mirrors.
  [Product Specifications]
  · [ Common Specifications]
  · Material: BK7
  · Coating: Dielectric Multilayer Film
  · Incidence Angle: 45° ±3°
  · Substrate Surface Accuracy: λ/10
  · Parallelism: < 3'
  · Scratch-Dig: 40-20
  · Effective Diameter: 90% of External Diameter
  · Rear Surface: Polished Surface
  · [Individual Specifications]
  · Compatible Wavelength: 400 to 2,000 nm
  · Outer diameter φD: φ50 mm
  · Thickness t: 8 mm
  · Reflectivity: > 98% on Average
  · Laser Yield Strength*: 0.5 J/cm2
  · * Laser Pulse Width 10 ns, Wavelength 532 nm, Repetition Frequency 20 Hz

  Select to compare

  Configure now
  Starting from∗ ：	571.91 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  HS-407 Heater Unit

  AS ONE

  [Features]
  · Dielectric multi-layer mirror available in a lineup of various wavelengths and possessing extremely high reflective characteristics.
  · Laser line dielectric multilayer film mirror with reflection zones matching various laser wavelengths.
  · Achieves a high degree of reflectance, so that even if multiple mirrors are reflected, the loss is small; ideal as a mirror for steering laser beams.
  · As a dielectric multilayer mirror, its mirror surface is not easily scratched and can be cleaned.
  · Because the film is not absorbent, it does not change over time and can withstand continuous laser irradiation.
  · When using at an incident angle of 0° or 45° or less, use the 0°-45° propagating film plane mirror (TFVM).
  · A surface accuracy guaranteed mirror (HTFM) that guarantees its surface accuracy after coating is also available.
  · * Reflection wavelength characteristics may vary depending on the polarization state of incident beams for dielectric multi-layer film.
  · * P polarization has lower reflectance and a narrower reflection band than S polarization.
  · * Reflectance for the specification shows average reflectance values of P polarization and S polarization.
  · * Reflectance may decrease when used with an incident angle other than 45°.
  · * When used at incompatible wavelengths, the reflectance may decrease.
  [Product Specifications]
  · [<45° Multi-Layered Dielectric Flat Mirror for Incidence> Common Specifications]
  · Material: BK7 (TFM-157 only, CaF2 Crystal)
  · Coating: Dielectric Multilayer Film
  · Incidence Angle: 45° ±3°
  · Substrate Surface Accuracy: λ/10, Optical Polishing (TFM-157)
  · Parallelism: < 3'
  · Scratch-Dig: 10-5 (TFM-157: 40-20)
  · Effective Diameter: 90% of External Diameter
  · [Individual Specifications]
  · Compatible Wavelength: 157 nm
  · Outer diameter φD: φ30 mm
  · Thickness t: 3 mm
  · Reflectance: >95.0%
  · Laser Yield Strength*: 0.5 J/cm2
  · Rear Surface: Polished Surface
  · * Laser Pulse Width 20 ns, Repetition Frequency 20 Hz

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	111.52 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  HS-419 Foot Switch

  AS ONE

  [Features]
  · Dielectric multi-layer mirror available in a lineup of various wavelengths and possessing extremely high reflective characteristics.
  · Laser line dielectric multilayer film mirror with reflection zones matching various laser wavelengths.
  · Achieves a high degree of reflectance, so that even if multiple mirrors are reflected, the loss is small; ideal as a mirror for steering laser beams.
  · As a dielectric multilayer mirror, its mirror surface is not easily scratched and can be cleaned.
  · Because the film is not absorbent, it does not change over time and can withstand continuous laser irradiation.
  · When using at an incident angle of 0° or 45° or less, use the 0°-45° propagating film plane mirror (TFVM).
  · A surface accuracy guaranteed mirror (HTFM) that guarantees its surface accuracy after coating is also available.
  · * Reflection wavelength characteristics may vary depending on the polarization state of incident beams for dielectric multi-layer film.
  · * P polarization has lower reflectance and a narrower reflection band than S polarization.
  · * Reflectance for the specification shows average reflectance values of P polarization and S polarization.
  · * Reflectance may decrease when used with an incident angle other than 45°.
  · * When used at incompatible wavelengths, the reflectance may decrease.
  [Product Specifications]
  · [<45° Multi-Layered Dielectric Flat Mirror for Incidence> Common Specifications]
  · Material: BK7 (TFM-157 only, CaF2 Crystal)
  · Coating: Dielectric Multilayer Film
  · Incidence Angle: 45° ±3°
  · Substrate Surface Accuracy: λ/10, Optical Polishing (TFM-157)
  · Parallelism: < 3'
  · Scratch-Dig: 10-5 (TFM-157: 40-20)
  · Effective Diameter: 90% of External Diameter
  · [Individual Specifications]
  · Compatible Wavelength: 193 nm
  · Outer diameter φD: φ25.4 mm
  · Thickness t: 5 mm
  · Reflectance: >95.0%
  · Laser Yield Strength*: 1 J/cm2
  · Rear Surface: Polished Surface
  · * Laser Pulse Width 10 ns, Repetition Frequency 20 Hz

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	122.84 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  HS-400-6 Connection Cord

  AS ONE

  [Features]
  · Dielectric multi-layer mirror available in a lineup of various wavelengths and possessing extremely high reflective characteristics.
  · Laser line dielectric multilayer film mirror with reflection zones matching various laser wavelengths.
  · Achieves a high degree of reflectance, so that even if multiple mirrors are reflected, the loss is small; ideal as a mirror for steering laser beams.
  · As a dielectric multilayer mirror, its mirror surface is not easily scratched and can be cleaned.
  · Because the film is not absorbent, it does not change over time and can withstand continuous laser irradiation.
  · When using at an incident angle of 0° or 45° or less, use the 0°-45° propagating film plane mirror (TFVM).
  · A surface accuracy guaranteed mirror (HTFM) that guarantees its surface accuracy after coating is also available.
  · * Reflection wavelength characteristics may vary depending on the polarization state of incident beams for dielectric multi-layer film.
  · * P polarization has lower reflectance and a narrower reflection band than S polarization.
  · * Reflectance for the specification shows average reflectance values of P polarization and S polarization.
  · * Reflectance may decrease when used with an incident angle other than 45°.
  · * When used at incompatible wavelengths, the reflectance may decrease.
  [Product Specifications]
  · [<45° Multi-Layered Dielectric Flat Mirror for Incidence> Common Specifications]
  · Material: BK7 (TFM-157 only, CaF2 Crystal)
  · Coating: Dielectric Multilayer Film
  · Incidence Angle: 45° ±3°
  · Substrate Surface Accuracy: λ/10, Optical Polishing (TFM-157)
  · Parallelism: < 3'
  · Scratch-Dig: 10-5 (TFM-157: 40-20)
  · Effective Diameter: 90% of External Diameter
  · [Individual Specifications]
  · Compatible Wavelength: 248.4 nm
  · Outer diameter φD: φ30 mm
  · Thickness t: 5 mm
  · Reflectance: >99.0%
  · Laser Yield Strength*: 2 J/cm2
  · Rear Surface: Polished Surface
  · * Laser Pulse Width 10 ns, Repetition Frequency 20 Hz

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	108.36 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  HS-400-9 Tweezer Assembly

  AS ONE

  [Features]
  · Dielectric multi-layer mirror available in a lineup of various wavelengths and possessing extremely high reflective characteristics.
  · Laser line dielectric multilayer film mirror with reflection zones matching various laser wavelengths.
  · Achieves a high degree of reflectance, so that even if multiple mirrors are reflected, the loss is small; ideal as a mirror for steering laser beams.
  · As a dielectric multilayer mirror, its mirror surface is not easily scratched and can be cleaned.
  · Because the film is not absorbent, it does not change over time and can withstand continuous laser irradiation.
  · When using at an incident angle of 0° or 45° or less, use the 0°-45° propagating film plane mirror (TFVM).
  · A surface accuracy guaranteed mirror (HTFM) that guarantees its surface accuracy after coating is also available.
  · * Reflection wavelength characteristics may vary depending on the polarization state of incident beams for dielectric multi-layer film.
  · * P polarization has lower reflectance and a narrower reflection band than S polarization.
  · * Reflectance for the specification shows average reflectance values of P polarization and S polarization.
  · * Reflectance may decrease when used with an incident angle other than 45°.
  · * When used at incompatible wavelengths, the reflectance may decrease.
  [Product Specifications]
  · [<45° Multi-Layered Dielectric Flat Mirror for Incidence> Common Specifications]
  · Material: BK7 (TFM-157 only, CaF2 Crystal)
  · Coating: Dielectric Multilayer Film
  · Incidence Angle: 45° ±3°
  · Substrate Surface Accuracy: λ/10, Optical Polishing (TFM-157)
  · Parallelism: < 3'
  · Scratch-Dig: 10-5 (TFM-157: 40-20)
  · Effective Diameter: 90% of External Diameter
  · [Individual Specifications]
  · Compatible Wavelength: 266 nm
  · Outer diameter φD: φ30 mm
  · Thickness t: 5 mm
  · Reflectance: >99.2%
  · Laser Yield Strength*: 2 J/cm2
  · Rear Surface: Polished Surface
  · * Laser Pulse Width 10 ns, Repetition Frequency 20 Hz

  Select to compare

  Configure now
  Starting from∗ ：	143.70 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  HS-400-23 Tweezer Set

  AS ONE

  [Features]
  · Dielectric multi-layer mirror available in a lineup of various wavelengths and possessing extremely high reflective characteristics.
  · Laser line dielectric multilayer film mirror with reflection zones matching various laser wavelengths.
  · Achieves a high degree of reflectance, so that even if multiple mirrors are reflected, the loss is small; ideal as a mirror for steering laser beams.
  · As a dielectric multilayer mirror, its mirror surface is not easily scratched and can be cleaned.
  · Because the film is not absorbent, it does not change over time and can withstand continuous laser irradiation.
  · When using at an incident angle of 0° or 45° or less, use the 0°-45° propagating film plane mirror (TFVM).
  · A surface accuracy guaranteed mirror (HTFM) that guarantees its surface accuracy after coating is also available.
  · * Reflection wavelength characteristics may vary depending on the polarization state of incident beams for dielectric multi-layer film.
  · * P polarization has lower reflectance and a narrower reflection band than S polarization.
  · * Reflectance for the specification shows average reflectance values of P polarization and S polarization.
  · * Reflectance may decrease when used with an incident angle other than 45°.
  · * When used at incompatible wavelengths, the reflectance may decrease.
  [Product Specifications]
  · [<45° Multi-Layered Dielectric Flat Mirror for Incidence> Common Specifications]
  · Material: BK7 (TFM-157 only, CaF2 Crystal)
  · Coating: Dielectric Multilayer Film
  · Incidence Angle: 45° ±3°
  · Substrate Surface Accuracy: λ/10, Optical Polishing (TFM-157)
  · Parallelism: < 3'
  · Scratch-Dig: 10-5 (TFM-157: 40-20)
  · Effective Diameter: 90% of External Diameter
  · [Individual Specifications]
  · Compatible Wavelength: 266 nm
  · Outer diameter φD: φ50 mm
  · Thickness t: 8 mm
  · Reflectance: >99.2%
  · Laser Yield Strength*: 2 J/cm2
  · Rear Surface: Polished Surface
  · * Laser Pulse Width 10 ns, Repetition Frequency 20 Hz

  Select to compare

  Configure now
  Starting from∗ ：	236.21 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Black ESD Tip Bit

  DUMONT

  [Specifications]
  ·Tip width (mm): 0.3
  ·Please choose according to the size , application, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.34 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Red ESD Tweezers

  DUMONT

  [Features]
  · Glossy-tip tweezers made from non-magnetic alloy.
  · Anti-static product.
  · Made from ESD.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	69.84 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...