ENGINEER Screwdrivers
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Petite Ratchet
ENGINEER
[Features]
· Built-in ratchet mechanism.
· Introducing the mini stubby screwdriver.
· Ultra-mini-size ratchet screwdriver.
· Stubby type, ideal for use in narrow places.
· Main body material: Aluminum.
· Number of ratchet gears: 45.
· Feed Angle: 8°Starting from∗ ： 19.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Pin Vice, Single-Headed Double-Ended Type (with Rotating Cap)
ENGINEER
A pin vise ideal for precision parts and plastic models.
[Features]
· Remove the rotary cap to store the collet.
[Applications]
· Can be used for versatile purposes such as holding drills, taps, etc. for drilling of printed circuit boards and processing of precision parts.Starting from∗ ： 19.33 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Hex Driver DH
ENGINEER
Screwdriver with hexagonal tip.
[Features]
· Sizes available for any size hex socket screw.
· The shaft is chrome-molybdenum steel.
[Applications]
· For tightening and removing hex socket screws.- Volume Discount
Starting from∗ ： 2.35 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Ceramic Adjustment Screwdriver Set DK-90
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).
· Pencil-type portable design with caps for protecting tip.
· 4 piece set of DA-48 and 50 to 52.
[Applications]
· For audio equipment such as tuners and amplifiers.
· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.Starting from∗ ： 107.24 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Special Screw Bit Set DR-18
ENGINEER
Screwdriver bit series special screw bit set that supports various special screws.
[Features]
· 10-piece set of DR-81 to 93.
· With bit holder.
[Applications]
· For all types of maintenance of mobile phones, PHS, radio sets, PC, home game machines, etc.Starting from∗ ： 87.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Bit Set DR-10 – 17
ENGINEER
A bit set with wide lineup, optimal for service engineers.
[Features]
· Bit set containing frequently used bits for a variety of applications, from short bits and long stepped bits to hex bits and more.
· Includes burette type holder for convenient bit storage and carrying.
· DR-16 is a bit set that is ideal for rechargeable/electric screwdrivers.
[Applications]
· Assembly of machinery, demolition work, maintenance of equipment, work inside factories, etc.- Volume Discount
Starting from∗ ： 17.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Master Grip Screwdriver Set DR-52
ENGINEER
Master grip screwdriver set equipped with frequently used magnetized strong bits.
[Features]
· Bit set that is also ideal for rechargeable or electric screwdrivers.
· The bit is made of chrome vanadium steel.
· Burette type bit holder for convenient mobility.
· A cushioned grip which fits well into the hand.
[Applications]
· For tightening and removing various screws.Starting from∗ ： 33.68 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Ratchet Stubby DR-03
ENGINEER
The ratchet stubby is ideal for work in tight spaces where a normal screwdriver doesn't fit.
[Features]
· A compact size which fits well in the hand.
· Includes a rapid turning mechanism.Starting from∗ ： 18.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Electroscopic Screwdriver DKD-01 / DKD-02
ENGINEER
Screwdriver for low voltage and automobile spark plug electrical inspection.
[Features]
· With a clip, it is convenient for carrying around.
· The built-in neon tube lights up.
[Applications]
· DKD-01: Ideal for conductivity and wireless communicator transmission tests.
· DKD-02: Ideal for vehicle spark plug voltage detection.Starting from∗ ： 5.54 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Replacement Screwdriver Set DK-05 – 08
ENGINEER
Replacement screwdriver set.
[Features]
· DK-05, 06 have a low voltage detecting grip. (80 – 300 VAC/100 – 250 VDC)
· The neon tube embedded inside the unit will light up if you make contact with the screwdriver tip and push the head part of the handle with your finger.
[Applications]
· Convenient for repair and maintenance work.Starting from∗ ： 23.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Screwdriver for Special Screw and for Pentalobular Screw
ENGINEER
Used for mobile phones, etc.- Volume Discount
Starting from∗ ： 16.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Ceramic Adjustable Screwdriver (with Rotating Cap)
ENGINEER
Ceramic adjustment screwdriver with a compact design ideal for trimmer adjustment with lines.
[Features]
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· The compact design of the included rotating cap's compact handle makes it easy to use.
[Applications]
· For adjustment work of variable coil, IFT and trimmer.Starting from∗ ： 11.24 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Ceramic Adjustment Screwdriver Set (with Rotating Cap) DK-91
ENGINEER
A compact design ceramic adjustment screwdriver.
[Features]
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· It can be adjusted at 2 locations, the tip portion (Phillips/flathead bit), and the shaft portion (hexagonal type).
· The compact design of the included rotating cap's compact handle makes it easy to use.
· 8 piece set of DA-81 to DA-88.
[Applications]
· For audio equipment such as tuners and amplifiers.
· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.Starting from∗ ： 69.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Pro Grip Screwdriver DG-01 – 04
ENGINEER
Anti-slip cushion grip screwdriver with outstanding tightening force.
[Features]
· The shaft is chrome-vanadium steel.
· The tip has been black-point processed.
[Applications]
· For tightening and removing various screws.Starting from∗ ： 11.28 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Screwdriver Set for Special Screw
ENGINEER
Screwdriver bit series that supports various special screws.
[Features]
· Can be selected to suit the screw shape and application.
[Applications]
· For mobile phones, hard disks, toys, small radio controllers, etc.- Volume Discount
Starting from∗ ： 8.09 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Rapid Screw Extractor
ENGINEER
Special dedicated screwdriver-type tool for removing stripped countersunk screws that cannot be removed using Neji-saurus screw removal pliers. No hammer required.
[Features]
· Dedicated screwdriver-type tool for removing screws.
· Includes bits that can be used in places where hammering is not possible. (DBZ-51)
· Includes bit for hex socket head screws with damaged screw recesses. (DBZ-53)
· Includes two shock-absorbent rubber sleeves for protecting fingers.
· Includes dedicated handle grip for applying high torque.
[Applications]
· Can be used for countersunk screws with stripped heads.Starting from∗ ： 35.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Offset Ratchet Set
ENGINEER
· This is a set of Phillips, flathead, and hex bits that are frequently used with offset ratchets.
· Includes Rapid Turning Mechanism
· With magnetStarting from∗ ： 27.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Strong Through Screwdriver
ENGINEER
[Features]
· Loosens stripped screws, rusted screws and screws that are stuck by hammering.
· Can be hit with a hammer.
· Can also be turned and tightened using a wrench due to the 6.0 mm width across flat shaft.Starting from∗ ： 8.93 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER |
| Product Series | Pin Vice, Single-Headed Double-Ended Type (with Rotating Cap) | Ceramic Adjustment Screwdriver Set (with Rotating Cap) DK-91 | ||||||||||||||||
| Starting from∗ | 19.53 € *Unit price with basic configuration | 19.33 € *Unit price with basic configuration | 2.35 € *Unit price with basic configuration | 107.24 € *Unit price with basic configuration | 87.77 € *Unit price with basic configuration | 17.63 € *Unit price with basic configuration | 33.68 € *Unit price with basic configuration | 18.57 € *Unit price with basic configuration | 5.54 € *Unit price with basic configuration | 23.00 € *Unit price with basic configuration | 16.74 € *Unit price with basic configuration | 11.24 € *Unit price with basic configuration | 69.89 € *Unit price with basic configuration | 11.28 € *Unit price with basic configuration | 8.09 € *Unit price with basic configuration | 35.81 € *Unit price with basic configuration | 27.54 € *Unit price with basic configuration | 8.93 € *Unit price with basic configuration |
| Min. Shipping Days ： | 5 Days | Same day | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | Same day | 5 Days | 6 Days | 8 Days |
| Tip standards | Phillips (+) | - | Hexagon | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) / Combination | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Flathead (-) | Combination | Other | Flathead (-) | Phillips (+)/Flathead(-) | Flathead (-) | Torx / Other | Combination | Combination | Flathead (-) |
| Tip size / Phillips (+) | No. 2 | - | - | Other | - | No. 00 / No. 0 / No. 1 / No. 2 | No. 0 / No. 1 / No. 2 | No. 1 / No. 2 | - | No. 1 / No. 2 | - | - | Other | - | - | - | No. 00 / No. 1 / No. 2 | - |
| Tip size / flathead (-) blade width (mm) B1 | - | - | - | 0.8 ～ 2.5 | - | 4.5 ～ 6 | 6 | 4.5 ～ 6 | - | 3.5 ～ 5.5 | - | 1.3 | 0.9 ～ 2.5 | 5.5 | - | - | 4.5、6.0 | 6.35 |
| Shaft length L (mm) | - | - | 90 | - | - | - | - | - | 28 | - | 100 | 18 | 15 ～ 18 | 80 | - | - | - | 152 |
| Single Product/Set Classification | Single Item | Single Item | Single Item | Set Product | Set Product | Set Product | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Set Product | Set Product | Single Item |
| Shaft type | - | - | Square | Round | Round | - | Square | - | Round | Round | Round | Round | Round | Round | Round | - | - | Round |
| Magnet | Available | - | N/A | N/A | Available | Available | Available | Available | N/A | N/A | N/A | N/A | N/A | Available | Available | - | - | - |
| Shaft through | - | - | N/A | N/A | - | - | - | - | N/A | - | N/A | N/A | N/A | N/A | - | - | N/A | Available |
| Bolster | - | - | N/A | N/A | - | - | - | - | N/A | - | N/A | N/A | N/A | N/A | - | - | - | - |
| Grip Type | Stainless Steel | - | Resin | Resin | - | - | Rubber | Rubber | Resin | Resin | Resin | Resin | Resin | Rubber | - | - | - | - |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | 0.35 ～ 0.7 | - | - | - | - | - | - | - | 0.4 | 0.35 ～ 0.7 | 0.7 | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | 2.5 | - | - | 1.5 ～ 6 | - | - | - | 5.5 | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 10
- 14
- 15
- 17
- 18
- 21
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 45
- 48
- 50
- 55
- 56
- 60
- 60, 75, 80
- 68
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 81
- 90
- 92
- 93
- 95
- 97
- 98
- 99
- 100
- 102
- 105
- 107
- 110
- 111
- 112
- 114
- 115
- 117
- 118
- 120
- 121
- 125
- 128
- 129
- 130
- 133
- 140
- 150
- 152
- 153
- 160
- 180
- 190
- 200
- 206
- 220
- 240
- 250
- 267
- 275
- 300
- 390
- 400
- 500
-
Single Product/Set Classification
-
Shaft type
-
Magnet
-
Shaft through
-
Bolster
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Brand
-
- WIHA (210)
- PB SWISS TOOLS (51)
- ESCO (44)
- MAEDAKINNZOKU (41)
- VESSEL (41)
- ANEX (33)
- WERA (25)
- TRUSCO NAKAYAMA (24)
- KTC(KYOTO TOOL) (23)
- ENGINEER (18)
- HOZAN (15)
- SK 11 (11)
- PHOENIX CONTACT (10)
- BAHCO (8)
- GEDORE (7)
- KO-KEN TOOL (7)
- AS ONE (6)
- SUNFLAG (5)
- CIMCO (4)
- BERNSTEIN AG (4)
- HAZET (4)
- KNIPEX (4)
- HIRAI KOGU (3)
- TRAD (3)
- WOLFCRAFT (2)
- EIGHT TOOL (2)
- E VALUE (2)
- SMATO (2)
- SIGNET (2)
- SUEKAGE TOOL (2)
- WEIDMUELLER (2)
- FACOM (2)
- ARC (1)
- BONDHUS (1)
- CUSTOM KOBO (1)
- HANDIWORK (1)
- HIOS (1)
- MATADOR (1)
- OSG (1)
- PROXXON (1)
- RITTAL (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.