GANTER Toggle Clamp Peripheral Components

?* Information on days to ship and prices

• • Promotional pricing ends 31/12/2024

  

  Stainless Steel-Toggle clamp spindle assemblies with Swivel Thrust Pad

  GANTER

  GN 903 toggle clamp spindle assemblies are an economical choice for use with various toggle clamps that require manual clamping height adjustments on even or uneven surfaces. Toggle screw swivels up to 15° in any direction.
  Thrust pad can be easily detached from and reassembled to screw.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	3.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle clamp spindle assemblies with adjustable spring loaded thrust pad

  GANTER

  In order to pass the dead center point and / or compensate for work piece tolerances when using hand operated toggle clamps, an elastic thrust pad such as GN 708.1 can be used.
  GN 804 toggle clamp spindle assemblies, which include Belleville spring washers, not only help to overcome workpiece tolerances, but also allow presetting of the required clamping force.
  This adjustment can be made via the hex nut (A/F). The setting nut stroke is the distance by which the Belleville washers can be preloaded as shown on the above graph to give the required clamping force.
  Hex jam nuts are included.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	12.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Toggle clamp spindle assemblies with Swivel Thrust Pad

  GANTER

  GN 903 toggle clamp spindle assemblies are an economical choice for use with various toggle clamps that require manual clamping height adjustments on even or uneven surfaces. Toggle screw swivels up to 15° in any direction.
  Thrust pad can be easily detached from and reassembled to screw.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	3.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Toggle clamp spindle assemblies with swivel thrust pad

  GANTER

  A snap ring between the screw and thrust pad provides a fast and simple connection.
  Thrust pad can be disassembled from screw.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	4.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Toggle clamp spindle assemblies, Stainless Steel

  GANTER

  The two hexagonal nuts are included part of the order.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	0.70 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adapter flanges, swing clamps GN / GN

  GANTER

  [Specifications]
  ・Material: AL. Aluminuml
  ・Finish: HE. hard anodized
  
  Adapter flanges GN 875.4 are designed as accessories to swing clamps GN 875 / GN 876 and serve as adapter for mounting custom clamping arms.

  • Volume Discount

  Starting from∗ ：	28.72 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Clamping arm extenders, rigid, toggle clamps forked clamping arm

  GANTER

  [Specifications]
  ・Material: ST. Steel
  
  Clamping arm extenders GN 801.1 are used together with toggle clamps with "forked clamping arm" to clamp something simultaneously at two points in parallel, such as with clamping screws. These are mounted to the clamping arm and affixed in the desired position along the slot.

  • Volume Discount

  Starting from∗ ：	9.10 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Clamping arms, threaded hole, swing clamps GN / GN

  GANTER

  [Specifications]
  ・Material: AL. Aluminuml
  ・Finish: HE. hard anodized
  
  Clamping arms GN 875.3 with threaded hole designed as accessories to swing clamp GN 875 / GN 876. The thread can receive an applicationspecific clamping bolt.

  • Volume Discount

  Starting from∗ ：	21.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Base plates for knee lever modules

  GANTER

  Accessories for knee lever modules

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	14.80 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Bushings for knee lever modules

  GANTER

  Accessories for knee lever modules

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	10.68 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Clamp mounting bracket accessories for pneumatic fastening clamps

  GANTER

  The clamp mounting bracket accessories GN 873 greatly increases the mounting possibilities and, with that, the field of applications for pneumatic fastening clamps is vastly increased.
  The abutting shoulder can be used for precise positioning of the pneumatic fastening clamps thus allowing a problem free exchange of the latter.
  The use of the two guide bushings ensures an exact and stable installation of the clamp mounting bracket accessories as well as the pneumatic fastening clamp.
  Other clamp mounting bracket accessories for the sizes d1 = 40 (piston Ø 20) and d1 = 50 (piston Ø 40) are shown under the tube clamp connector range.
  Guide bushings are included.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	124.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Clamp mounts for toggle clamps with forked clamping arm / Steel / zinc plated, blue passivated / GN 801

  GANTER

  GN 801 clamp mounts have been developed for use with toggle clamps that are designed with a forked clamping arm.
  The clamp mount can be moved along the clamping arm. Once the desired position is reached, you can secure the mount in place with the clamping screw.
  The d2 thread functions to hold pressure screws, pressure dies and similar devices.
  The ideal clamping height can be adjusted without loosening the clamp mount on the forked clamping arm.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	5.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamp mounts for toggle clamps with solid clamping arm / Steel / zinc plated, blue passivated / GN 809

  GANTER

  GN 809 clamp mounts have been developed for use with toggle clamps that are designed with a solid clamping arm.
  The clamp mount can be moved along the clamping arm and be adjusted in height. Once the desired position is reached, you can secure the mount in place with the clamping screw.
  The d2 thread functions to hold pressure screws, pressure dies, and similar devices.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	20.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamping arm extenders for knee lever modules

  GANTER

  Accessories for knee lever modules

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	27.50 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Handles for knee lever modules

  GANTER

  Accessories for knee lever modules

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	2.48 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Jaw block accessories for pneumatic fastening clamps

  GANTER

  Jaw block accessories GN 872 are manufactured to meet the dimensions of the accessories for clamping arms and brackets.
  Guide bushings GN 870 arenot included.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	23.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Lever arms for knee lever modules

  GANTER

  Accessories for knee lever modules

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	15.76 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Toggle clamp spindle assemblies, Steel

  GANTER

  The two hexagon nuts are included part of the order.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	0.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping arm extenders, joint, toggle clamps forked clamping arm

  GANTER

  [Specifications]
  ・Material: ST. Steel
  
  Clamping arm extenders GN 801.2 are used together with toggle clamps with "forked clamping arm" to clamp something simultaneously at two points in parallel, such as with clamping screws. These are mounted to the clamping arm and affixed in the desired position along the slot.

  • Volume Discount

  Starting from∗ ：	18.78 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Clamping arms, slotted hole, swing clamps GN / GN

  GANTER

  [Specifications]
  ・Material: AL. Aluminuml
  ・Finish: HE. hard anodized
  
  Clamping arms GN 875.2 with slotted hole designed as accessories to swing clamps GN 875 / GN 876. The slotted hole allows arbitrary positioning of application-specific pressing elements in connection with the two flanged washers.

  • Volume Discount

  Starting from∗ ：	26.10 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...