Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

GANTER Clamping Knobs

113

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 1 Day or Less 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less

?* Information on days to ship and prices

Stainless Steel-Knurled screws with recessed stud for loss prevention

GANTER

Stainless Steel-Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	4.60 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Knurled screws, Stainless Steel

GANTER

All Stainless Steel-Knurled screws DIN 464 are machined from solid bar.
Unlike in the official standard sheet, they are generally made with thread right up to the head and without recess groove at the end of the thread.

Volume Discount

Starting from^∗ ：	2.66 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Star knobs, Brass insert

GANTER

Star knobs, Brass insert

Volume Discount

Starting from^∗ ：	0.98 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Knurled screws, Steel / Stainless Steel

GANTER

Knurled screws DIN 464 are machined from solid bar.
Unlike in the official standard sheet, they are generally made with thread right up to the head and without recess groove at the end of the thread.
The official standard sheet also provides for the sizes M1 / M1,2 / M1,6 / M2 and M2,5.

Volume Discount

Starting from^∗ ：	0.98 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Star knobs with movable thrust pad

GANTER

Star knobs GN 6336.12 have a ball pin whose diameter is smaller than the core diameter of the thread.
The movable thrust pad is easily clipped on and taken off.
The thrust pads are supplied unmounted.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	3.08 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Quick release star knobs, Plastic

GANTER

Quick release star knobs GN 6336.3 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
The knob is tilted over the threaded spindle. When in position, the knob is brought into a straight position for meshing of the two threads on nut and spindle. The knob will then have to be turned only by fraction of a rotation to achieve clamping.
Functional safety exists only if the clamping surface lies at a right angle to the threaded bolt.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	6.14 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Star knobs, plastic, threaded bolt Stainless Steel

GANTER

Star knobs GN 6336.5 comply with DIN 6336 type L.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	1.36 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hand knobs, Aluminum with Stainless Steel-Threaded bolt

GANTER

Hand knobs, Aluminum with Stainless Steel-Threaded bolt

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	12.04 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Knurled screws

GANTER

The knurling of the Stainless Steel-Knurled screws GN 535 allows a use in an environment with hygienic requirements.
Specification

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	10.02 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Torque limiting knob screws

GANTER

Torque limiting knob screws GN 3663 are used when the manually applied torque is to be limited.
When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.
After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	56.08 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Quick release star knobs, Plastic, bushing, Stainless Steel

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	9.98 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Hand knobs, Plastic

GANTER

Hand knobs DIN 6335 with bore H7 are available as GN 6335.1.

Volume Discount

Starting from^∗ ：	0.76 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Knurled screws with recessed stud for loss prevention

GANTER

Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	1.84 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Star knobs with pivot

GANTER

Star knobs GN 6336.10 with brass or plastic thrust pad are used when indentations or damage is to be avoided.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	2.60 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Star knobs, Plastic

GANTER

Star knobs DIN 6336 with bore H7 are available under code GN 6336.1 and GN 6336.2.

Volume Discount

Starting from^∗ ：	0.88 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Star knobs, plastic, with threaded bolt steel

GANTER

Star knobs GN 6336.4 comply with DIN 6336 type L.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	0.74 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Control knobs, Aluminium, black anodized

GANTER

The light grey cover of the control knobs GN 726 shrouds the fixing components as well as the shaft end. The cover also lends itself for a logo or other symbols.
Made from an aluminum extrusion allows the manufacture of customized solutions in existing diameters at relatively low cost.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	8.42 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flat knurled screws, Steel

GANTER

All flat knurled screws DIN 653 are produced from one piece and threaded over ist full length.

Volume Discount

Starting from^∗ ：	0.96 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Indexing mechanisms, Steel

GANTER

Indexing mechanisms GN 200 replace and simplify complicated indexing and safety mechanisms.
Besides the standard scale (Type AS) the control knob version may be supplied with any scale. In such cases, it is recommended to use the matt chrome plated version since the colour contrast is better.
Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	65.84 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Knurled screws, with pivot

GANTER

Knurled screws GN 7336.5, type MS/KU with brass or plastic pivots are used when pressure dents or damage must be avoided.
Knurled screws GN 7336.5, type ZK feature a spherical pivot whose Ø d6 is smaller than the core Ø of the thread. The version with spherical pivot is suitable for holding GN 631 / GN 631.5 thrust pads, which must be ordered separately.
The knurled screws GN 7336.5 distinguish an attractive design in combination with closed shape (no recess on the underside of the handles).

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	5.04 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Quick release toggle nuts

GANTER

Quick release toggle nuts GN 6305.1 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
Plug the toggle nut onto the threaded bolt at an oblique angle. During the clamping action, it engages into the threads of the bolt.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	17.70 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stainless Steel-Flat knurled screws with brass / plastic pivot

GANTER

Stainless Steel-Flat knurled screws GN 653.10 with pivot in brass or plastic are used in applications, where marks and damages on the workpiece are unacceptable.
The head dimensions comply with flat knurled thumb screws DIN 653.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	6.20 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Star knobs with loss protection

GANTER

Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.
The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	4.30 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Tommy screws, with fixed bar

GANTER

The thrust point of these screws DIN 6304 is designed to be used with or without a thrust pad for clamping.
The snap ring is a simple and quick method to connect the thrust pad to the tommy screw.
Instead of DIN 6311 a thrust pad GN 6311.1 can be used. In that case the tommy screw and the thrust pad have to be ordered separately.
Hint for installation (Type F)
The thrust pad has to be held at an angle allowing the circlip to drop to the bottom of its groove with the split end downwards. The thrust point is then offered up to the split end of the circlip at the lowest possible angle and pressed home.

Volume Discount

Starting from^∗ ：	9.20 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Tommy screws, with movable bar

GANTER

The thrust point of these screws DIN 6306 is designed to be used with or without the thrust pad for clamping.
The snap ring is a simple and quick method to connect the thrust pad to the tommy screw.
Instead of DIN 6311 a thrust pad GN 6311.1 can be used. In that case the tommy screw and the thrust pad have to be ordered separately.
The movable bar of the tommy screw DIN 6306 is held in any position by the pressure spring.
The end caps are pressed on to the bar and thus limit the bar travel, they can also be supplied separately should the bar be plated first.The official DIN standard sheets provides for steel rings at this point.

Volume Discount

Starting from^∗ ：	17.30 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Waist shaped knobs, Steel

GANTER

Waist shaped knobs GN 75 boast a compact and timeless design.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	3.76 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Control knobs with adjustable spindle, Aluminium / Steel

GANTER

Control knobs with adjustable spindle GN 727 allow precise adjustment or aligning i. e. of a positive stop. The spindle thread is without backlash.
The graduations on the control knob are non-abrasive and well legible,
The light grey cover shrouds the fixing components as well as the shaft end.
Regarding design, numbering run, numbering position and mubering sequence of the scale please see the layout for scale rings on the order sheet "How to order Graduations".

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	82.96 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flat knurled screws with brass / plastic pivot

GANTER

Flat knurled screws GN 653.10 with pivot in brass or plastic are used in applications, where marks and damages on the workpiece are unacceptable.
The head dimensions comply with flat knurled thumb screws DIN 653.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	4.18 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Knobs, Stainless Steel

GANTER

Stainless Steel-Knobs GN 676.5 are used in applica-tions where a push or pull movement is required. Their concave top gives a more comfortable thumb grip.
The knurled model (Type B) can be used as an attractively shaped knurled knob with a threaded blind hole.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	7.46 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Star knobs with loss protection

GANTER

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	6.04 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Star knobs, plastic, with protruding steel bushing, with threaded bolt steel

GANTER

The star knobs have an immaculate contact or clamping surface thanks to the protruding steel bushing.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	0.74 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Torque limiting knobs

GANTER

Volume Discount

Starting from^∗ ：	38.58 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Torque limiting knobs

GANTER

Torque limiting knobs GN 3663 are used when the manually applied torque is to be limited.
When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.
After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	55.98 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Flat Knurled screws, Stainless Steel

GANTER

All Stainless Steel-Flat knurled screws DIN 653 are produced from one piece and threaded over its full length.

Volume Discount

Starting from^∗ ：	2.46 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hand knobs with increased clamping force

GANTER

Hand knobs GN 6335.9 have a clamping contact area which is connected to the knob via an axial ball bearing. This has led to the following advantages:
Doubled clamping force through vastly reduced friction. There is no movement on the contact area between star knob and component which greatly reduces any marking on the clamping area. In addition a reduced creep factor has been achieved by the indreased preload.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	26.66 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Hand knobs, Plastic, protruding Stainless Steel bushing, Stainless Steel-Threade

GANTER

The hand knobs have an immaculate contact or clamping surface thanks to the protruding Stainless Steel bushing.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	2.50 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Knurled screws, Plastic

GANTER

Knurled screws GN 7336 distinguish an attractive design in combination with closed shape (no recess on the underside of the handles).
Knurled screws GN 7336 are also available without threaded insert.
Article codes:
GN 7336-34
GN 7336-42
GN 7336-53

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	4.04 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Indexing mechanisms

GANTER

Stainless Steel-Indexing mechanisms GN 200 replace and simplify complicated indexing and safety mechanisms.
Besides the standard scale (Type AS) the control knob version may be supplied with any scale.
Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	113.90 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Star knobs with stainless steel insert

GANTER

Star knobs with stainless steel insert

Volume Discount

Starting from^∗ ：	2.04 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Star knobs, Duroplast

GANTER

Star knobs GN 6336.1 with bushing have important advantages:
The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	1.88 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Star knobs, plastic, with protruding Stainless Steel bushing, Stainless Steel-Threded stud

GANTER

The star knobs have an immaculate contact or clamping surface thanks to the protruding Stainless Steel bushing.

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	2.34 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Torque limiting knob screws

GANTER

Volume Discount

Starting from^∗ ：	38.70 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Control knobs, Aluminium, black anodized

GANTER

The light grey cover of the control knobs GN 726.1 shrouds the fixing components as well as the shaft end. The cover also lends itself for a logo or other symbols.
The collet version permits a simple adjustment of the types with scale or arrow.
Scale and arrow on the control knobs are indelibly marked and easily legible.
Besides the standard scale (Type S) the control knobs can be supplied with any type of graduation.
Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale knobs on the order sheet „How to order Graduations“

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	8.62 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Control knobs, Stainless Steel

GANTER

Scale and arrow on the Stainless Steel-control knobs GN 436.1 are indelibly marked and easily legible.
Besides the standard scale (Type S) the control knobs can be supplied with any type of graduation.
Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale knobs on the order sheet „How to order Graduations“

Volume Discount

2D / 3D CAD data available

Starting from^∗ ：	17.88 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Hand knobs, Aluminum

GANTER

Hand knobs, Aluminum

Volume Discount

Starting from^∗ ：	6.68 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：
Main Body Type
Mounting Section Type
Mounting Section Diameter d(mm) and/or Diameter
Mounting Section Length L(mm)
Types of round-shaped
4-side finish
Polygon, type
T Shaped Kind
Additional Function
Male Tip Machining
Female Thread, Round hole processing
Set Screw Thread Machining
Main Body Material
Main Body Surface Treatment
Mounting Section Material
Mounting Section Surface Treatment


Brand	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER
Product Series	Stainless Steel-Knurled screws with recessed stud for loss prevention	Knurled screws, Stainless Steel	Star knobs, Brass insert	Knurled screws, Steel / Stainless Steel	Star knobs with movable thrust pad	Quick release star knobs, Plastic	Star knobs, plastic, threaded bolt Stainless Steel	Hand knobs, Aluminum with Stainless Steel-Threaded bolt	Stainless Steel-Knurled screws	Torque limiting knob screws	Quick release star knobs, Plastic, bushing, Stainless Steel	Hand knobs, Plastic	Knurled screws with recessed stud for loss prevention	Star knobs with pivot	Star knobs, Plastic	Star knobs, plastic, with threaded bolt steel	Control knobs, Aluminium, black anodized	Flat knurled screws, Steel	Indexing mechanisms, Steel	Knurled screws, with pivot	Quick release toggle nuts	Stainless Steel-Flat knurled screws with brass / plastic pivot	Star knobs with loss protection	Tommy screws, with fixed bar	Tommy screws, with movable bar	Waist shaped knobs, Steel	Control knobs with adjustable spindle, Aluminium / Steel	Flat knurled screws with brass / plastic pivot	Knobs, Stainless Steel	Star knobs with loss protection	Star knobs, plastic, with protruding steel bushing, with threaded bolt steel	Torque limiting knobs	Torque limiting knobs	Flat Knurled screws, Stainless Steel	Hand knobs with increased clamping force	Hand knobs, Plastic, protruding Stainless Steel bushing, Stainless Steel-Threade	Knurled screws, Plastic	Stainless Steel-Indexing mechanisms	Star knobs with stainless steel insert	Star knobs, Duroplast	Star knobs, plastic, with protruding Stainless Steel bushing, Stainless Steel-Threded stud	Torque limiting knob screws	Control knobs, Aluminium, black anodized	Control knobs, Stainless Steel	Hand knobs, Aluminum
CAD	2D / 3D				2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D		2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D			2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D		2D / 3D	2D / 3D
Starting from^∗	4.60 € *Unit price with basic configuration Volume Discount	2.66 € *Unit price with basic configuration Volume Discount	0.98 € *Unit price with basic configuration Volume Discount	0.98 € *Unit price with basic configuration Volume Discount	3.08 € *Unit price with basic configuration Volume Discount	6.14 € *Unit price with basic configuration Volume Discount	1.36 € *Unit price with basic configuration Volume Discount	12.04 € *Unit price with basic configuration Volume Discount	10.02 € *Unit price with basic configuration Volume Discount	56.08 € *Unit price with basic configuration Volume Discount	9.98 € *Unit price with basic configuration Volume Discount	0.76 € *Unit price with basic configuration Volume Discount	1.84 € *Unit price with basic configuration Volume Discount	2.60 € *Unit price with basic configuration Volume Discount	0.88 € *Unit price with basic configuration Volume Discount	0.74 € *Unit price with basic configuration Volume Discount	8.42 € *Unit price with basic configuration Volume Discount	0.96 € *Unit price with basic configuration Volume Discount	65.84 € *Unit price with basic configuration Volume Discount	5.04 € *Unit price with basic configuration Volume Discount	17.70 € *Unit price with basic configuration Volume Discount	6.20 € *Unit price with basic configuration Volume Discount	4.30 € *Unit price with basic configuration Volume Discount	9.20 € *Unit price with basic configuration Volume Discount	17.30 € *Unit price with basic configuration Volume Discount	3.76 € *Unit price with basic configuration Volume Discount	82.96 € *Unit price with basic configuration Volume Discount	4.18 € *Unit price with basic configuration Volume Discount	7.46 € *Unit price with basic configuration Volume Discount	6.04 € *Unit price with basic configuration Volume Discount	0.74 € *Unit price with basic configuration Volume Discount	38.58 € *Unit price with basic configuration Volume Discount	55.98 € *Unit price with basic configuration Volume Discount	2.46 € *Unit price with basic configuration Volume Discount	26.66 € *Unit price with basic configuration Volume Discount	2.50 € *Unit price with basic configuration Volume Discount	4.04 € *Unit price with basic configuration Volume Discount	113.90 € *Unit price with basic configuration Volume Discount	2.04 € *Unit price with basic configuration Volume Discount	1.88 € *Unit price with basic configuration Volume Discount	2.34 € *Unit price with basic configuration Volume Discount	38.70 € *Unit price with basic configuration Volume Discount	8.62 € *Unit price with basic configuration Volume Discount	17.88 € *Unit price with basic configuration Volume Discount	6.68 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	4 Days	Same day	Same day	Same day	Same day	Same day	Same day	Same day	4 Days	Same day	4 Days	Same day	Same day	Same day	5 Days	Same day	4 Days	Same day	Same day	Same day	Same day	9 Days	Same day	Same day	5 Days	Same day	Same day	5 Days	Same day	Same day	Same day	7 Days	Same day	4 Days	Same day
Main Body Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Section Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Section Diameter d(mm) and/or Diameter	-	-	-	-	-	-	M 6 ～ M 12	-	-	M 4 ～ M 12	-	-	-	-	M 4 ～ M 16	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	M 5 ～ M 12	-	M 3 ～ M 12	-	-	-	-	-	-	-	M 5 ～ M 12	-	-	-	-
Mounting Section Length L(mm)	15 ～ 42	-	-	4 ～ 40	25 ～ 55	-	10 ～ 55	20 ～ 55	-	12 ～ 63	-	-	15 ～ 42	10 ～ 55	-	10 ～ 70	-	-	-	-	-	-	10 ～ 50	40 ～ 110	40 ～ 90	-	-	-	-	-	10 ～ 60	-	-	-	-	16 ～ 60	11 ～ 50	-	-	-	10 ～ 60	-	-	-	-
Types of round-shaped	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
4-side finish	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Polygon, type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
T Shaped Kind	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Additional Function	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Male Tip Machining	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Female Thread, Round hole processing	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Set Screw Thread Machining	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Main Body Material	Stainless Steel	Stainless Steel	Polypropylene	Stainless Steel	-	-	-	-	-	-	-	Polypropylene	Steel	-	Polypropylene	-	-	-	-	-	Steel	Stainless Steel	-	-	-	-	-	Steel	-	-	-	-	-	Stainless Steel	-	-	Stainless Steel / Steel	Stainless Steel	Polypropylene	-	-	-	-	-	Aluminum
Main Body Surface Treatment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Section Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Mounting Section Surface Treatment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Main Body Type
- Round shape
- Polygon
- T-Shaped
- Butterfly Shaped
- Special Forms
- Related Components
Images

Clear

Mounting Section Type
- Male thread
- Male thread (stepped)
- Female Thread
- Female Screw (Stepped)
- Round Hole
- Press Fitting Type
- Other
- With Screw
Clear

Mounting Section Diameter d(mm) and/or Diameter
G 1

G 1 1/2

G 1 1/4

1/2

G 1/2

1/4

G 1/4

M2

2.1

2.7

3

M3

M 3

G 3/4

3/8

G 3/8

4

M4

M 4

5

M5

M 5

5/16

6

M6

M 6

6.1

7

8

M8

M 8

M8x1

10

M10

M 10

M10x1

11

12

M12

M 12

M12x1,5

13

14

M14

M14x1.5

15

16

M16

M 16

M16x1,5

M16x1.5

18

20

M20

M20x1.5

M24

M26x1.5

M27x1.5

M33x1.5

M40x1.5

M42x1.5

M42x2
Drawing

Clear

Mounting Section Length L(mm)
2

3

3.5

4

5

6

6.5

6.6

7

7.2

7.5

8

8.4

8.5

8.8

9

9.1

9.5

9.6

10

10.5

10.7

11

11.5

11.8

12

12.5

13

13.4

13.5

13.8

14

14.5

14.6

15

16

17

18

18.4

18.8

19

19.6

20

21

22

23

23.4

23.8

24

24.6

25

26

26.5

27

28

28.4

28.5

28.8

29

30

31

32

33

34

35

36

37

38

39

39.5

40

42

45

48

50

54.5

55

58

60

63

70

75

80

90

110
Drawing

Clear

Types of round-shaped
- Cylindrical
- Clamp Shape
- Mushroom Shape
- Chrysanthemum Type
- Volume Knob Type
- Ball
Images

Clear

4-side finish
- N/A
- Knurled
- Diamond Pattern
- Dimple
- Diamond cut
Images

Clear

Polygon, type
- Triangle
- Cross Shape
- Pentagon
- Hexagon Shape
- Heptagon
- Octagon
- Star Shaped
Images

Clear

T Shaped Kind
- Bar
- Wing
Images

Clear

Additional Function
- N/A
- With Hex Socket
- With Cross Hole
- With slotting
- Washer-Embedded
- Fall Prevention
- Axial Bearing Built-in
- Cylindrical (With Countersunk Hole)
- Stop loosening
- With Scale
- Other
Images

Clear

Male Tip Machining
- N/A
- Spherical Surface
- With Pad
- Cone Point
Clear

Female Thread, Round hole processing
- Blind Hole
- Through
- Reamer Finish
Images

Clear

Set Screw Thread Machining
- N/A
- Presence (1 place)
- Presence (2 place)
Images

Clear

Main Body Material
- Stainless Steel
- Steel
- Aluminum
- Nylon
- Phenol
- ABS
- Polyacetal
- Brass
- Polyamide
- Polypropylene
- Melamine Resin
- EPDM
- Other
- Vinyl
- Plastic
- Cast Iron
- Resin
Clear

Main Body Surface Treatment
- N/A
- Trivalent Chromate
- Black Oxide
- Barrel Polishing
- Paint
- Shot Blasted
- Buffed Surface + Chrome Plating
- Hair Line
- Chrome Plating
- Electroless Nickel Plating
- Electrolytic Polishing
- Buffed Surface
- Anodized Aluminum
- Other
- Sand blasted
Clear

Mounting Section Material
- Stainless Steel
- Steel
- Aluminum
- Nylon
- Phenol
- Polyacetal
- Brass
- Tin bronze
- Other
- Vinyl Chloride
Clear

Mounting Section Surface Treatment
- N/A
- Trivalent Chromate
- Black Oxide
- Nitriding Treatment
- Nickel Plating
- Bright Chromate Plating
- Chrome Plating
- Other
- Chromate
Clear

Narrow search by specifying Brand

- MISUMI (37)
- Cost Efficient Products ()
- KIPP (223)
- ESCO (174)
- GANTER (113)
- ELESA (111)
- KONISHI MFG (62)
- NABEYA BI-TECH (49)
- HALDER (38)
- MITSUBOSHI CI (18)
- DAIMARU BYORA SEISAKUSHO (16)
- IMAO CORPORATION (12)
- TAKIGEN (10)
- TRUSCO NAKAYAMA (7)
- GOSHO WORKS (6)
- REYHER (3)
- SUNCO (3)
- KONOE (2)
- KYOWA (2)
- SHIMIZU (1)
Clear