MITUTOYO Micrometers

?* Information on days to ship and prices

• 

  Outside Micrometer Economy Design, Series 103

  MITUTOYO

  A Mitutoyo basic, cost effective, non-digital micrometer with a ratchet stop to guarantee repeatable measurement. High resolution provided by a vernier scale on sleeve.

  Starting from∗ ：	59.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Medium-sized Standard, with Clamp Nut

  MITUTOYO

  These micrometer heads are a medium-sized, standard type.
  They offer the following benefit:
  - Extremely sturdy micrometer head with or without a ratchet.

  Starting from∗ ：	67.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Locking Screw Type

  MITUTOYO

  These micrometer heads feature a locking screw so you can lock the spindle in any position with the knurled locking screw.

  Starting from∗ ：	75.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital 3-Point Internal Micrometer

  MITUTOYO

  These are three-point internal micrometers that offer you the following benefits:
  - Individual micrometer
  - Titanium-coated measuring pins give you excellent durability and impact resistance.
  - They also have excellent resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splashing coolant fluid.
  - Large LCD display with character height of 7.5 mm enables you to read measurements easily.
  - Without setting rings or extensions.

  Starting from∗ ：	1,228.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Absolute Micrometer QuickMike

  MITUTOYO

  This Quickmike, with a non-rotating spindle, delivers much faster movement than standard models.
  The ABSOLUTE Digimatic Micrometer Quickmike offers the following benefits:
  - With 10 mm feed per thimble rotation, it delivers twenty times as fast as standard devices.
  - Excellent resistance against water and dust (IP65) enables this micrometer to be used in machining situations that include splashing coolant fluid.
  - ABSOLUTE linear scale means no restriction on adjustment speed.
  - Larger measuring range - 30 mm compared with 25 mm - than standard micrometer.

  Starting from∗ ：	499.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Inside Micrometer Caliper Type

  MITUTOYO

  The Digimatic Caliper Jaw Inside Micrometer offers you the following benefits:
  - Carbide measuring faces
  - A setting standard (optional) is needed to accurately set the micrometer to the reference point.

  Starting from∗ ：	915.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Interchangeable Ball Anvil/Spindle Tip

  MITUTOYO

  These optional interchangeable anvils allow you to measure the over-pin diameter of gears.

  Starting from∗ ：	152.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Small Standard Type

  MITUTOYO

  This is a standard, small-sized micrometer head which offers you the following benefits:
  - Plain stem and a flat or spherical spindle end
  - Hardened steel measuring surface

  Starting from∗ ：	57.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Measuring Head Holtest/Borematic

  MITUTOYO

  Starting from∗ ：	299.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Outside Micrometer Economy Design Set

  MITUTOYO

  This Mitutoyo set of basic, cost effective, non-digital micrometers incorporating ratchet stops to guarantee repeatable measurement.

  Starting from∗ ：	290.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Locking Screw Type, with Clamp Nut

  MITUTOYO

  These micrometer heads feature a locking screw so you can lock the spindle in any position with the knurled locking screw.

  Starting from∗ ：	74.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Ratchet Stop Plastic

  MITUTOYO

  Starting from∗ ：	12.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  326/126 Series, Replaceable Anvil Screw Thread Micrometer TMC

  MITUTOYO

  [Applications]
  · Used by replacing the spare stylus on a single main body.
  [Features]
  · The effective diameter of the screw can be read directly (calculation not needed).
  · Equipped with a constant pressure device.
  · With reference rod for reference point adjustment for metric (unified) 60°

  Starting from∗ ：	77.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  3-Wire Thread Measuring, Series 313

  MITUTOYO

  The measuring wires are hardened and precision lapped. They are placed onto spindle and anvil of the outside micrometer. The three-wire measuring process is applied to determine the pitch diameter of threads and considered as one of the most accurate measuring procedures.

  Starting from∗ ：	4,381.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Depth Micrometer Carbide Tipped Rod

  MITUTOYO

  This Depth Micrometer offers you the following benefits:
  - ∅4 mm measuring rod
  - Ratchet stop provides you with constant measuring force.
  - Measuring rod lock
  - Carbide-tipped measuring rod model is available.

  Starting from∗ ：	207.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Micrometer IP65 Metric

  MITUTOYO

  This IP65 Micrometer offers outstanding accuracy, with data output, is highly robust and offers the following benefits:
  - Oil-resistant material used for all plastic parts
  - Extraordinary battery life of 2.4 years
  - Excellent resistance against water and dust enables this micrometer to be used in machining situations that include splashing coolant fluid.

  Starting from∗ ：	1,259.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digital Micrometer Head

  MITUTOYO

  This Micrometer Head has a 25 mm range and a 10 mm stem, and offers the following benefits:
  - You can integrate it into machinery and measuring instruments.
  - Measurement values are clearly displayed in 0.001mm increments.
  - Stem diameter: 10 mm

  Starting from∗ ：	513.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Display Unit Borematic Series 568, Inch/Metric

  MITUTOYO

  Starting from∗ ：	1,234.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  External Dial Caliper Gauge

  MITUTOYO

  This analog External Dial Caliper Gauge offers you the following benefits:
  - Excellent resistance against water and dust (IP65 protection level)
  - Optimized measuring force
  - Ergonomically designed to lie securely in your hand when measuring

  Starting from∗ ：	589.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Fixture for Micrometer Head, Plain Stem

  MITUTOYO

  Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:
  - These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
  - Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.

  Starting from∗ ：	43.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micro Jack

  MITUTOYO

  A Mitutoyo height-adjustable support for accurate levelling of small machines, surface plates, and similar equipment. Easily adjusted under heavy load.

  Starting from∗ ：	504.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Fixture for Micrometer Head, with Clamp Nut

  MITUTOYO

  Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:
  - These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
  - Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.

  Starting from∗ ：	43.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Gear Tooth Micrometer

  MITUTOYO

  Measuring the over-pin diameter of gears. It has interchangeable steel or carbide ball inserts (optional accessory).

  Starting from∗ ：	410.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Inside Micrometer, Interchangeable Rods

  MITUTOYO

  This an interchangeable rod type inside micrometer that offers you the following benefits:
  - Interchangeable measuring rods and spacers achieve the full specified measuring range.
  - Each interchangeable rod is marked with its measuring range.
  An extension handle to help you measure deep bores is included in sets up to 300 mm range.

  Starting from∗ ：	80.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Zero Adjustable, with Clamp Nut

  MITUTOYO

  These are a standard type of small size micrometer heads with a zero-adjustable thimble.
  They offer the following benefits:
  - You can make a zero-setting at any position by loosening the setscrew in the thimble.

  Starting from∗ ：	95.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Differential Screw

  MITUTOYO

  This is a differential screw translator (extra-fine feed) type of micrometer head. It offers you the following benefits:
  Micrometer head with ultra-fine rate of travel.
  With its non-rotating spindle it is particularly suited to fine adjustments. The differential travel mechanism with double spindle enables ultra-sensitive travel

  Starting from∗ ：	265.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Heavy Duty, with Clamp Nut

  MITUTOYO

  These micrometer heads are a medium-sized, standard type.
  They offer the following benefits:
  - 8 mm diameter spindle
  - Extremely sturdy micrometer head with or without a ratchet.

  Starting from∗ ：	125.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Spindle Feed, with Clamp Nut

  MITUTOYO

  These micrometer heads have a very fine spindle feed.
  They offer the following benefits:
  - Small size micrometer heads with extremely fine pitch
  - Ideal for fine adjustment applications in scientific apparatus

  Starting from∗ ：	89.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Spanner

  MITUTOYO

  Starting from∗ ：	7.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Outside Micrometer Interchangeable Anvil

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with easily interchangeable anvils to enable a wide measuring range from one instrument. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	227.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Screw Thread Micrometer, Series 126

  MITUTOYO

  A Mitutoyo non-digital micrometer designed to mount easily interchangeable anvils/spindle-tips for measuring a wide range of screw threads. The highly stable frame incorporates a heat shield to preserve accuracy over extended measuring sessions. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	371.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Setting Standard V-Anvil Micrometer

  MITUTOYO

  Used for accurately setting V-anvil micrometers

  Starting from∗ ：	66.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tubular Inside Micrometer, Hardened Face, Inch

  MITUTOYO

  This is an extension rod type inside micrometer that offers you the following benefits:
  - Interchangeable extensions with cylindrical gage rods are spring-mounted in protective sleeves so you can extend the measuring range.
  - Carbide measuring faces are available.

  Starting from∗ ：	274.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  167 Series, Micrometer Reference Rod MB

  MITUTOYO

  Nominal dimensions (mm): 25 to 2000
  [Applications]
  For setting the reference point of the external micrometer.

  Starting from∗ ：	33.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Measuring Head Borematic

  MITUTOYO

  Starting from∗ ：	837.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  3-Wire Thread Measuring

  MITUTOYO

  The measuring wires are hardened and precision lapped. They are placed onto spindle and anvil of outside micrometer. The three-wire measuring process is applied to determine the pitch diameter of threads and considered as one of the most accurate measuring procedures.

  Starting from∗ ：	240.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Blade Micrometer QuickMike

  MITUTOYO

  This ABSOLUTE Digimatic Blade Micrometer Quickmike is designed to help you measure hard-to-reach features.
  It offers the following benefits:
  - Blade-shaped anvil and spindle for measuring the groove diameter of shafts, keyways and other hard-to reach features
  - Non-rotating spindle
  - Fast spindle feed of 10 mm/revolution

  Starting from∗ ：	1,017.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Blade Micrometer QuickMike, Inch/Metric

  MITUTOYO

  This ABSOLUTE Digimatic Blade Micrometer Quickmike is designed to help you measure hard-to-reach features.
  It offers the following benefits:
  - Blade-shaped anvil and spindle for measuring the groove diameter of shafts, keyways and other hard-to reach features
  - Non-rotating spindle
  - Fast spindle feed of 10 mm/revolution

  Starting from∗ ：	1,338.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Disc Micrometer, Adjustable Force

  MITUTOYO

  The ABSOLUTE Digimatic Disc Micrometer Quickmike allows you to measure with a fast spindle feed of 10 mm per thimble rotation.
  It offers you the following benefits:
  - Suitable for measuring felt, rubber, cardboard, fabric etc.
  - Suitable to measure "root tangent length" of spur gears and helical gears.
  - With a non-rotating spindle and disc-shaped measuring surface.
  - Measuring force is adjustable for various kinds of workpieces (series 227)

  Starting from∗ ：	1,387.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Micrometer, Adjustable Force

  MITUTOYO

  This Quickmike has an adjustable measuring force to suit various kinds of workpieces.
  The ABSOLUTE Digimatic Micrometer Quickmike offers the following benefits:
  - It's dedicated to applications requiring a constant/low measuring force such as measuring wire, paper and plastic/rubber parts.
  - Constant and low measuring force mechanism in the thimble.
  - Non-rotating spindle
  - Speedy spindle feed of 10 mm per thimble rotation

  Starting from∗ ：	1,214.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ball Attachment

  MITUTOYO

  A Mitutoyo ball attachment for imperial micrometers up to 6 inch
  It fits on the anvil to form a spherical contact surface to enable measurement on concave surfaces, such as the inside of pipes.

  Starting from∗ ：	146.05 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Blade Micrometer

  MITUTOYO

  This Blade Micrometer is designed to help you measure hard-to-reach features.
  It offers the following benefits:
  - Blade-shaped anvil and spindle for measuring the groove diameter of shafts
  - Non-rotating spindle

  Starting from∗ ：	303.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Measuring Head Holtest

  MITUTOYO

  Starting from∗ ：	641.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Caliper Jaw Inside Micrometer

  MITUTOYO

  The Caliper Jaw Inside Micrometer offers you the following benefits:
  - Carbide measuring faces
  - A setting standard (optional) is needed to accurately set the micrometer to the reference point.

  Starting from∗ ：	299.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Caliper Jaw Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with caliper jaws to enable measurement in confined spaces. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	390.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...