NABEYA Jigs for Manual Tightening

?* Information on days to ship and prices

• 

  Atlas Screw Jack

  NABEYA

  Convenient for fixing workpieces thanks to its widened base and lengthened screw.

  Starting from∗ ：	334.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Swing Clamp S Type

  NABEYA

  An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

  • Volume Discount

  Starting from∗ ：	60.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamp Support Screw Jack

  NABEYA

  Clamp support screw jack is convenient for supporting a variety of clamps. When one unit is insufficient in operation or height, two or three units can be stacked together. (Only for same sizes) The attachment is convenient for supporting irregular objects.

  Starting from∗ ：	44.21 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Side Clamp 6841

  NABEYA

  6841: SS400, 6841NI: SUS304/6841: Zinc-plated toggle side clamp 6841.

  Starting from∗ ：	129.93 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Screw Jack

  NABEYA

  · Attachment for No. E-9175A can be used for SJK type.
  · SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.

  • Volume Discount

  Starting from∗ ：	33.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Eccentric Rough Guide

  NABEYA

  A part for guiding workpieces when setting them or replacement plates, etc., to jigs. Made of resin to avoid scratching important workpieces. Variation of the workpiece can be adjusted with an eccentricity of 2 mm.

  • Volume Discount

  Starting from∗ ：	18.27 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6830

  NABEYA

  [Features]
  · 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  • Volume Discount

  Starting from∗ ：	47.53 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Heavy Duty Toggle Side Clamp 6842PL

  NABEYA

  Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

  Starting from∗ ：	156.27 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6833

  NABEYA

  Hold down toggle clamp 6833 made of EN 1.0038 Equiv. and zinc plating.

  Starting from∗ ：	114.49 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Vacuum Chuck

  NABEYA

  [Features]
  · Adsorption of workpieces is possible by simply supplying air from a compressor.
  · Supports non-magnetic workpieces such as aluminum, stainless steel, and copper, etc. with which a magnetic chuck cannot be used.
  · VCM0303E.
  · Supply valve can only turn the adsorption ON or OFF.
  · VCM0303S.
  · Adsorption and air blowing are both possible using the changeover switch.
  · The current adsorption force can be confirmed by vacuum pressure gauge.
  · Adsorption force can be adjusted by vacuum regulator

  Starting from∗ ：	2,454.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Rubber Cap 6893

  NABEYA

  Dedicated clamping screw for toggle clamps.

  • Volume Discount

  Starting from∗ ：	5.94 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Quick Lock

  NABEYA

  Annoying thread feeding when clamping is not necessary. Quick action clamp which adopts a cam lock mechanism.

  Starting from∗ ：	274.07 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6800

  NABEYA

  [Features]
  · 6800: SS400/6800NI: SUS304, 6800: Zinc-plated toggle-down clamp 6800.
  · 6800S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  Starting from∗ ：	72.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PA Feed Plate for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  • Volume Discount

  Starting from∗ ：	15.09 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  PA Adjustment Bolt for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  • Volume Discount

  Starting from∗ ：	15.09 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Adjusting Clamp

  NABEYA

  Standard T-slot bolted clamp.

  Starting from∗ ：	105.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Attachment for Clamp Support Jack

  NABEYA

  [Features]
  · The one that fits the workpiece can be selected from the various types of attachments.
  · For N0.E-175 clamp support screw jack and N0.E-176 screw jack only.

  • Volume Discount

  Starting from∗ ：	20.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Screw Jack (Fixed) Type

  NABEYA

  Attachment for No. E-175A can be used for SJK type. SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.

  • Volume Discount

  Starting from∗ ：	81.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Q Lock (Screw Type) Clamp Bushing

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Starting from∗ ：	98.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flange Locating Pin (Diamond Pin S)

  NABEYA

  Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)

  Starting from∗ ：	120.37 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Locating Pin (Ball DLC Diameter)

  NABEYA

  Compared with chamfering pins, galling is less likely to occur during insertion, making it ideal for use as a positioning pin for robot jigs or workpieces. The 1 mm width around the reference plane enables stable positioning. The reference surface is given a DLC (Diamond-Like Carbon) coating, providing excellent abrasion resistance.

  • Volume Discount

  Starting from∗ ：	80.95 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6803

  NABEYA

  [Features]
  · SS400 and galvanized toggle down clamp 6803.
  · 6803S: Since it has a structure where it cannot be operated unless the safety lever is gripped, it prevents error operation and malfunction.

  • Volume Discount

  Starting from∗ ：	99.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Hook Clamp 6848V

  NABEYA

  6848VNI is made of stainless steel. The hook length can be adjusted.

  Starting from∗ ：	90.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Swing Clamp B Type

  NABEYA

  It can be horizontally swung to attach and remove workpieces. Can be used for T-grooves and for tapped holes. Automatically rises via a built-in spring when unclamped. Attachments can be mounted.

  Starting from∗ ：	355.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Swing Clamp A Type

  NABEYA

  [Features]
  · It can be horizontally swung to attach and remove workpieces.
  · Can be used for T-grooves and for tapped holes.
  · The dedicated height adjust support enables the clamp height to be adjusted to the workpiece.
  · Tool-less (with handle).
  · Free clamping direction (without guide groove).
  · The built-in spring causes it to automatically rise when unclamping.
  · Attachments can be mounted

  Starting from∗ ：	377.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6832

  NABEYA

  [Features]
  · SS400/galvanized toggle down clamp 6832.
  · 6832S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  Starting from∗ ：	66.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Heavy Duty Toggle Side Clamp 6842

  NABEYA

  Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

  Starting from∗ ：	184.17 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Height Setting Jack

  NABEYA

  With a hole at the upper center. (φ12) E-756 Attachment for jack can be used in combination. Bearing is embedded in thread component.

  Starting from∗ ：	455.41 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Nut Runner Clamp Large Model

  NABEYA

  A clamp bar for L-type nut runners. This product can be additionally processed by the customer.
  
  [Features]
  · Torque control and speedy clamping can be performed by using Nut Runner.
  · Quasi-hydraulic operability, no piping is required so it is handy to use.
  · Clamp bar springs up to easily attach/detach the workpiece.
  · Free from troubles such as oil leakage as it does not use oil.

  Starting from∗ ：	659.44 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Nut Runner Clamp Small Model

  NABEYA

  [Features]
  · Torque control and speedy clamping can be performed by using Nut Runner.
  · Quasi-hydraulic operability, no piping is required so it is handy to use.
  · Use Nut Runner for speedy clamping.
  · Clamp cover rotates 90 degrees (rotation direction can be chosen).
  · Free from troubles such as oil leakage as it does not use oil.

  Starting from∗ ：	616.43 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Heavy Type Screw Jack

  NABEYA

  A screw jack for large workpieces. The manufacturer has a product lineup with a maximum load capacity of 40 KN to 80 KN and a minimum height of 200 mm to a maximum of 1,250 mm.

  Starting from∗ ：	1,114.20 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Straight Pin

  NABEYA

  Slight chamfering is given for φ3 to φ5 and chamfering of C0.3 to 0.5 for φ6 or higher.

  • Volume Discount

  Starting from∗ ：	9.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Reference Seat (Flange Provided)

  NABEYA

  [Features]
  · Specification with air holes can be used to verify seating (O-ring not included).
  · The diameter of the workpiece support is large, allowing load from the top to be firmly supported

  • Volume Discount

  Starting from∗ ：	64.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Reference Seat (Air Hole with Flange Provided)

  NABEYA

  Specification with air holes can be used to verify seating (O-ring not included). The seating diameter is small, thanks to a space-saving design that makes it possible to use in narrow places.

  • Volume Discount

  Starting from∗ ：	89.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rough Guide Pin for Q Lock (Side Type)

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.

  • Volume Discount

  Starting from∗ ：	52.68 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Q Lock (Screw Type) Locating Bushing

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Starting from∗ ：	118.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rough Guide Pin for Q Lock

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.

  • Volume Discount

  Starting from∗ ：	47.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Eccentric Height Cylinder

  NABEYA

  EN 1.7264 Equiv., Hardening HRC60 eccentricity height cylinder.
  Compatible bolts are M12/16.

  • Volume Discount

  Starting from∗ ：	64.47 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Aluminum Base Jack

  NABEYA

  Chips bite into in the aluminum base, leaving no scratches on the machine table. Lightweight as it is made of aluminum.

  Starting from∗ ：	174.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Arm Clamp

  NABEYA

  Forged S45C/hardened HRC45 arm clamp.

  • Volume Discount

  Starting from∗ ：	73.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Quick Hold Down Clamp

  NABEYA

  Flat jaw and angled handle for quick hold down clamp (medium).

  Starting from∗ ：	330.25 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Bar for Quick Lock

  NABEYA

  [Features]
  · Bar for Quick Lock.
  · Annoying thread feeding when clamping is not necessary.
  · A one-action clamp that adopts a cam lock mechanism

  • Volume Discount

  Starting from∗ ：	36.29 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Check Plate for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  • Volume Discount

  Starting from∗ ：	5.06 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Clamp Part of Wedge Clamp (for T-Shaped Grooves)

  NABEYA

  For the T-slot on the clamping part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, clamp stroke 6 mm. The workpiece contact surface is a flat type. The manufacturer also sells the clamp part only.

  Starting from∗ ：	195.85 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Wedge Clamp Set (for T-Shaped Grooves)

  NABEYA

  Wedge clamp set for T-grooves, flat type.

  Starting from∗ ：	320.13 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...