NS TOOL Carbide Ball End Mills
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
MRBH230 Long-Neck Ball, Hard (for High Hardness)
NS TOOL
The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface- Volume Discount
- Stock
Starting from∗ ： 26.97 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
SSB200 CBN Super Speed Ball End Mill
NS TOOL
High efficiency CBN ball end mill that combines CBN's long life and high precision with carbide's ease of useStarting from∗ ： 132.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SSPB220 CBN Super Spiral Ball End Mill
NS TOOL
[Features]
· Spiral ball shape used to improve sharpness of cutting edge.
· The cutting edge shape used improves the chipping resistance of the cutting edge.
· When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
Torsion angle: 20°Starting from∗ ： 172.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining
NS TOOL
The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristicsStarting from∗ ： 239.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSB345 3-Flute Ball-End Mill
NS TOOL
Enables efficient machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution- Volume Discount
Starting from∗ ： 69.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining
NS TOOL
World's smallest ball end mill "Micro Ball" extends the microfabrication area- Volume Discount
Starting from∗ ： 76.47 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
SSBL200 CBN Super Speed Long Neck Ball End Mill
NS TOOL
Effective length up to 10 mm. Supports deeper machining compared with conventional CBN toolsStarting from∗ ： 141.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SFB200 CBN Super Finish Ball End Mill
NS TOOL
The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or moreStarting from∗ ： 181.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MACH225SF Short Shank, for High-Speed and High-Hardness Processing, Ball End Mill (for Thermal Insert)
NS TOOL
Short shank type (supports shrink fit). Ball end mill designed for high-speed and high-hardness machining- Volume Discount
Starting from∗ ： 45.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSBH230 2-Flute Ball-End Mill for High-Hardness
NS TOOL
Standard type ball end mill for high hardness. Ideal for finishing- Volume Discount
- Stock
Starting from∗ ： 26.17 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
MSBH345 3-Flute Ball-End Mill for High-Hardness
NS TOOL
Enables high-efficiency machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution- Volume Discount
Starting from∗ ： 96.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
RSB230 Ball-End Mill for Resin Clear Cut
NS TOOL
3x, 5x and 10x blade length, ultra long neck, same diameter type - selectable according to machining shape.- Volume Discount
Starting from∗ ： 42.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)
NS TOOL
[Features]
Long shank cutter with 2 cutting edges.
[Features]
Suitable for machining aluminium alloys, copper and resins.- Volume Discount
Starting from∗ ： 71.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSB230 MUGEN-COATING 2-Flute Ball End Mill
NS TOOL
Supports three-dimensional precision machining from low to high speeds- Volume Discount
Starting from∗ ： 23.81 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)
NS TOOL
Long Neck Ball End Mill for Short Shank Type (supports shrink fit)- Volume Discount
Starting from∗ ： 37.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)
NS TOOL
Long Neck Ball End Mill for Short Shank Type (supports shrink fit)- Volume Discount
Starting from∗ ： 34.08 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
MSB230S MUGEN-COATING Short Ball End Mill
NS TOOL
The high-rigidity design enables high speed machining without chattering- Volume Discount
Starting from∗ ： 43.04 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill
NS TOOL
The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products- Volume Discount
Starting from∗ ： 49.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
NS TOOL
Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds- Volume Discount
Starting from∗ ： 29.29 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
MSBL230 MUGEN-COATING Long Ball End Mill
NS TOOL
Machining utilizing the benefits of a long shank is possible- Volume Discount
Starting from∗ ： 108.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill
NS TOOL
The tuned Infinity coating sustains high precision machining for a long time- Volume Discount
Starting from∗ ： 58.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels
NS TOOL
Large cutting depth can be set, with effective high-speed feed- Volume Discount
Starting from∗ ： 52.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long-Neck Ball End Mill (for Deep Ribs) NHB-2
NS TOOL
Supports three-dimensional precision deep engraving. Neck relief type suitable to narrow deep processing- Volume Discount
Starting from∗ ： 75.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Miniature Ball End Mill NCB-2
NS TOOL
Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding- Volume Discount
Starting from∗ ： 80.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
X Coated Miniature Ball-End Mill NCB-2X
NS TOOL
Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding- Volume Discount
Starting from∗ ： 90.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
X Coated Ball-End Mill NSB-2X
NS TOOL
Ideal for high-precision 3D processing. A universal type for roughing, semi-finishing and finishing- Volume Discount
Starting from∗ ： 78.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long Ball End Mill NSBL-2
NS TOOL
The blade length is 5 times the radius. 3D machining utilizing the benefits of a long shank is possible- Volume Discount
Starting from∗ ： 124.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aluminum Ball-End Mill ALB225
NS TOOL
The unique blade shape suppresses chattering during corner and side machining- Volume Discount
Starting from∗ ： 34.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230
NS TOOL
Infinity coating has been adopted for the extra long ball end mill. Machining utilizing the benefits of a long shank is possible- Volume Discount
Starting from∗ ： 128.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Diamond Coating, Long-Neck Ball End Mill DCRB230
NS TOOL
The unique diamond coating demonstrates high durability when machining graphite, high silicon aluminum alloy, etc.- Volume Discount
Starting from∗ ： 123.37 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ball End Mill for Copper Electrode / Aluminum / Plastic DB
NS TOOL
Uses a very sharp cutting edge for outstanding nonferrous machining performance- Volume Discount
Starting from∗ ： 74.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aluminum Ball-End Mill (DLC Coating) ALB225-DLC
NS TOOL
Adopts a highly adhesive DLC coating suited to long periods of machining.- Volume Discount
Starting from∗ ： 45.94 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
SSPBL220 CBN Super Spiral Long Neck Ball End Mill
NS TOOL
[Features]
· Supports deeper milling by utilizing the features of SSPB220 and through the use of a spiral ball shape and strong back taper shape to improve both sharpness and the chipping resistance of cutting edges.Starting from∗ ： 160.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MRBLN230-6 MUGEN COATING Long Neck Ball End Mill ⌀6 Shank Diameter Type (For Deep Ribbing)
NS TOOL
[Features]
· NS original deep ribbing end mill with MUGEN coating applied.
· Neck relief type suitable for narrow deep processing.- Volume Discount
Starting from∗ ： 119.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NSB-2 Ball End Mill
NS TOOL
[Features]
· Ball end mill suitable for use with materials from carbon steel to heat-treated steel.- Volume Discount
Starting from∗ ： 71.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NLBL-2 Long Blade Long Shank Ball End Mill
NS TOOL
[Features]
· Ball end mill suitable for use with materials from carbon steel to heat-treated steel.- Volume Discount
Starting from∗ ： 117.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| R Size(mm) |
| Type |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Coating |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| R Precision(μm) |
| Machining Application |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL |
| Product Series | SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining | NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining | DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib) | MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting) | MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting) | MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing) | MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels | MRBLN230-6 MUGEN COATING Long Neck Ball End Mill ⌀6 Shank Diameter Type (For Deep Ribbing) | ||||||||||||||||||||||||||||
| Starting from∗ | 26.97 € *Unit price with basic configuration Volume Discount | 132.57 € *Unit price with basic configuration | 172.90 € *Unit price with basic configuration | 239.99 € *Unit price with basic configuration | 69.64 € *Unit price with basic configuration Volume Discount | 76.47 € *Unit price with basic configuration Volume Discount | 141.40 € *Unit price with basic configuration | 181.70 € *Unit price with basic configuration | 45.91 € *Unit price with basic configuration Volume Discount | 26.17 € *Unit price with basic configuration Volume Discount | 96.47 € *Unit price with basic configuration Volume Discount | 42.09 € *Unit price with basic configuration Volume Discount | 71.19 € *Unit price with basic configuration Volume Discount | 23.81 € *Unit price with basic configuration Volume Discount | 37.33 € *Unit price with basic configuration Volume Discount | 34.08 € *Unit price with basic configuration Volume Discount | 43.04 € *Unit price with basic configuration Volume Discount | 49.89 € *Unit price with basic configuration Volume Discount | 29.29 € *Unit price with basic configuration Volume Discount | 108.37 € *Unit price with basic configuration Volume Discount | 58.31 € *Unit price with basic configuration Volume Discount | 52.58 € *Unit price with basic configuration Volume Discount | 75.47 € *Unit price with basic configuration Volume Discount | 80.25 € *Unit price with basic configuration Volume Discount | 90.74 € *Unit price with basic configuration Volume Discount | 78.34 € *Unit price with basic configuration Volume Discount | 124.12 € *Unit price with basic configuration Volume Discount | 34.47 € *Unit price with basic configuration Volume Discount | 128.70 € *Unit price with basic configuration Volume Discount | 123.37 € *Unit price with basic configuration Volume Discount | 74.53 € *Unit price with basic configuration Volume Discount | 45.94 € *Unit price with basic configuration Volume Discount | 160.36 € *Unit price with basic configuration | 119.67 € *Unit price with basic configuration Volume Discount | 71.02 € *Unit price with basic configuration Volume Discount | 117.59 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | Same day | Same day | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days |
| Specifications |
|
| ||||||||||||||||||||||||||||||||||
| R Size(mm) | 0.05 ～ 3 | 0.1 ～ 1 | 0.1 ～ 3 | 0.01 ～ 0.05 | 0.5 ～ 6 | 0.005 ～ 0.05 | 0.05 ～ 1 | 0.1 ～ 1 | 0.1 ～ 3 | 0.05 ～ 6 | 0.5 ～ 3 | 0.1 ～ 3 | 0.5 ～ 3 | 0.05 ～ 6 | 0.1 ～ 6 | 0.1 ～ 1.5 | 0.1 ～ 6 | 0.1 ～ 2 | 0.05 ～ 3 | 0.1 ～ 5 | 0.05 ～ 3 | 0.1 ～ 3 | 0.4 ～ 3 | 0.2 ～ 0.9 | 0.2 ～ 0.9 | 1 ～ 6 | 3 ～ 6 | 0.3 ～ 6 | 0.5 ～ 5 | 0.2 ～ 3 | 0.5 ～ 3 | 0.3 ～ 6 | 0.1 ～ 1 | 0.15 ～ 1 | 1 ～ 5.5 | 0.5 ～ 10 |
| Type | Long-Neck Ball | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Ball | Tapered neck ball | Long-Neck Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball |
| work material | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | Aluminum[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | Aluminum[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | Aluminum[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] |
| Blade length (ℓ)(mm) | 0.07 ～ 6 | 0.15 ～ 1.2 | 0.15 ～ 3.6 | 0.02 ～ 0.1 | 1.5 ～ 20 | 0.01 ～ 0.1 | 0.08 ～ 1.2 | 0.15 ～ 1.2 | 0.2 ～ 6 | 0.1 ～ 20 | 1.5 ～ 10 | 0.6 ～ 30 | 1.5 ～ 9 | 0.1 ～ 20 | 0.2 ～ 12 | 0.15 ～ 2.5 | 0.2 ～ 12 | 0.2 ～ 4 | 0.07 ～ 6 | 0.5 ～ 25 | 0.1 ～ 10 | 0.2 ～ 6 | 0.6 ～ 6 | 0.8 ～ 3.6 | 0.8 ～ 3.6 | 3 ～ 15 | 15 ～ 30 | 0.45 ～ 24 | 2.5 ～ 25 | 0.3 ～ 6 | 2 ～ 12 | 0.45 ～ 24 | 0.15 ～ 1.2 | 0.3 ～ 2 | 3 ～ 15 | 15 ～ 70 |
| Number of flutes(sheet) | 2 | 2 | 2 | 1 | 3 | 1 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Coating | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | Non-Coated | TiAlN | Non-Coated | Non-Coated | Non-Coated | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | TiCN | TiCN | Non-Coated | Non-Coated | TiAlN | Dia Coat | Non-Coated | DLC | Non-Coated | TiAlN | Non-Coated | Non-Coated |
| Overall Length (L)(mm) | 45 ～ 120 | 52 ～ 53 | 50 ～ 70 | 50 | 60 ～ 120 | 45 | 50 ～ 53 | 50 ～ 52 | 35 ～ 45 | 50 ～ 100 | 60 ～ 80 | 50 ～ 130 | 50 ～ 110 | 50 ～ 110 | 35 ～ 60 | 35 ～ 50 | 50 ～ 110 | 50 ～ 110 | 45 ～ 120 | 70 ～ 200 | 50 ～ 80 | 50 ～ 60 | 45 ～ 120 | 35 | 35 | 60 ～ 110 | 120 ～ 180 | 60 ～ 120 | 100 ～ 250 | 45 ～ 120 | 45 ～ 80 | 60 ～ 120 | 51 ～ 53 | - | - | 150 ～ 250 |
| Underneck length (ℓ1)(mm) | 0.2 ～ 50 | 0.3 ～ 5 | 0.3 ～ 18 | - | - | - | 0.3 ～ 10 | 0.5 ～ 5 | 0.5 ～ 15 | - | - | 2 ～ 80 | 4 ～ 50 | - | - | 0.5 ～ 20 | - | 1 ～ 60 | 0.3 ～ 50 | - | - | 0.5 ～ 15 | 6 ～ 50 | - | - | - | - | 3 ～ 60 | - | 1 ～ 60 | - | 3 ～ 60 | 0.9 ～ 20 | 3 ～ 20 | - | - |
| Shank diameter (d)(mm) | 4 ～ 6 | 4 | 4 | 4 | 6 ～ 12 | 4 | 4 | 4 | 4 ～ 6 | 4 ～ 12 | 6 | 3 ～ 6 | 4 ～ 8 | 4 ～ 12 | 4 ～ 12 | 4 | 4 ～ 12 | 4 ～ 8 | 4 ～ 6 | 3 ～ 10 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 3 | 3 | 4 ～ 12 | 6 ～ 12 | 4 ～ 12 | 3 ～ 10 | 4 ～ 6 | 4 ～ 6 | 4 ～ 12 | - | - | - | 20 |
| R Precision(μm) | 0.005～-0.005 | 0.005～-0.005 ～ 3 to -3 | 0.05～-0.05 ～ 5 to -5 | - | 0.01～-0.01 | 0.002～-0.002 | 0.005～-0.005 | 0.003～-0.003 ～ 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | 0.01～-0.01 | 0.002～-0.002 | 0.005～-0.005 ～ 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 ～ 0.02～-0.02 | 0.02～-0.02 | 0.01～-0.01 | 0.02～-0.02 | 0.01～-0.01 | 0.01～-0.01 | 0.01～-0.01 | -0.003 to 0.003 | -0.01 to 0.01 | -0.02 to 0.02 ～ -0.01 to 0.01 | -0.02 to 0.02 ～ -0.01 to 0.01 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface | Curved surface | Curved surface | Curved surface |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- R3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- R 4.0
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- R4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.45
- 0.48
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.1
- 1.12
- 1.19
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.4
- 1.42
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.39
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.85
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.81
- 3.85
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.874
- 7
- 7.1
- 7.2
- 7.4
- 7.5
- 7.874
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.7
- 9
- 9.5
- 9.7
-
10～10.8
- 10
- 10.5
- 10.8
-
11～11.5
- 11
- 11.2
- 11.278
- 11.28
- 11.3
- 11.5
-
12～12.7
- 12
- 12.5
- 12.7
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.199
- 14.2
- 14.4
- 14.5
-
15
-
16～16.993
- 16
- 16.5
- 16.99
- 16.993
-
17～17.9
- 17
- 17.5
- 17.9
-
18
-
19
-
20
-
21～21.5
- 21
- 21.5
-
22～22.682
- 22
- 22.3
- 22.68
- 22.682
-
23
-
24
-
25
-
26～26.9
- 26
- 26.9
-
27
-
28～28.6
- 28
- 28.296
- 28.3
- 28.6
-
29
-
30
-
31.6
-
32
-
33
-
34
-
35
-
36～36.5
- 36
- 36.5
-
38
-
40
-
44.6
-
45～45.49
- 45
- 45.49
-
48
-
50
-
55
-
58
-
60
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
-
-
Number of flutes(sheet)
-
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
R Precision(μm)
-
Machining Application
Narrow search by specifying Brand
-
- MISUMI (39)
- OSG (67)
- NS TOOL (36)
- GUHRING (22)
- DIJET (18)
- UNION TOOL (15)
- NACHI(FUJIKOSHI) (14)
- SANDVIK (14)
- EIKOSHA (13)
- KYOWA SEIKO (9)
- OKAZAKI SEIKO (6)
- SANKO MFG (6)
- THE CUT (5)
- 7 LEADERS (4)
- ATOM (3)
- ASAHI TOOLS (2)
- SPEED TIGER (2)
- TOYO DRILL (1)
- CREATE TOOL (1)
- KYOCERA (1)
- VAN_HOORN (1)
- WIDIN (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Carbide Ball End Mills
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.