OMRON Safety sensor

?* Information on days to ship and prices

• 

  Safety Mat, UMA Series

  OMRON

  Easy-to-install safety mat with advanced features
  • 1 and 2 cable types
  • Meets EN ISO 13849-1 (PLd/Safety Category 3) and EN ISO 13856-1
  • Can be used with MC3 Safety Mat Controller, SCC-1224A Safety Mat/Edge Controller or NX Safety Controller
  • Complies with North American safety standards including ANSI/RIA 15.06

  Starting from∗ ：	274.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ELMON Safety Relay for Safety Edge

  OMRON

  The ELMON rail 41-822 switching device is used to evaluate sensors such as safety contact mats, safety contact edges and safety bumpers for securing crush and shear locations.
  An ASO sensor can be connected to the switching device. The steady-state current monitoring of the sensor is made possible by an integrated terminating resistor in the sensor.
  Furthermore, the device can also evaluate a sensor in four-wire technology.
  If the desired steady-state current flows, the safety relays are driven and the switching contacts closed. If the sensor is operated or the sensor circuit is interrupted, the relay switching contacts open.
  A signal output with potential-free switching contacts is available. An operation of the sensor causes a reaction of the signal output in accordance with the DIP switch configuration. The signal output must not execute any safety-orientated functions. It is not fail-safe and not checked by testing either.
  The switching device has been designed and type-approved in accordance with EN ISO 13849-1 “Safety-related parts of control systems” for category 3 Performance Level e. For compliance with category 3, the safety output is set up redundantly with two independent switching elements.
  In addition the device has been type-approved according to EN 62061 “Functional safety of safety-related electrical, electronic and programmable electronic control systems“ and can meet a safety function up to SIL 3.
  The monitoring state of the sensor and the applied operating voltage are indicated by LED.
  If there is a fault alarm, all safety outputs are inactive.

  Starting from∗ ：	440.10 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Laser Alignment Kit for Safety Sensor F3S-TGR-CL

  OMRON

  [Specifications]
  ・Applicable Series: F3S-TGR-CL□
  
  Laser Alignment Kit for Safety Sensor F3S-TGR-CL

  Starting from∗ ：	696.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Mirror Columns for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam [F39-SML]

  OMRON

  The use of mirror columns allows wiring at one location for protection around perimeters of equipment. They reduce wiring duct design and wiring time.

  Starting from∗ ：	681.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Ethernet Cable for Safety Laser Scanner OS32C

  OMRON

  Required for configuration and monitoring.

  Starting from∗ ：	318.05 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Laser Alignment Pointer for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam

  OMRON

  Easy beam adjustment with laser beam
  Assists with beam adjustment. Easy-to-see laser beam shows the sensor orientation. It can be attached on the spatter protection cover.

  Starting from∗ ：	724.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Male-Male Extension Cable (M8, 3-pin) for Safety Mat UMA Series

  OMRON

  Used to connect the connector sockets of 2-cable UMA Safety Mats together.

  Starting from∗ ：	44.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Root-Straight Cable for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam

  OMRON

  [Specifications]
  ・Cable Length(m): 3-10
  F39-JG□C-L
  ・For emitter
  ・To sensors: dedicated connector
  ・To external: open-ended type 5 wires
  ・Color: Gray
  F39-JG□C-D:
  ・For receiver or emitter/receiver of F3SG-PG
  ・Perimeter Guarding Passive Mirror
  ・To sensors: dedicated connector
  ・To external: open-ended type 8 wires
  ・Color: Black

  Starting from∗ ：	21.12 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Safety Light Curtain, Advanced Model [F3SG-SRA]

  OMRON

  Easy to monitor and ready for IoT
  • Conforms to major international standards
  • Environmental resistance and rugged structure for use in various environments (IP67, IP67G*1)
  • A broad line-up, from finger protection to body protection
  • Flexible height model for easy integration into machines and lines
  • IoT ready via IO-Link
  *1. IEC 60529/JIS C 0920 Annex 1

  Starting from∗ ：	749.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Safety Light Curtain, Standard Model [F3SG-SRB]

  OMRON

  Easy to monitor and ready for IoT
  • Conforms to major international standards
  • Environmental resistance and rugged structure for use in various environments (IP67, IP67G*1)
  • A broad line-up, from finger protection to body protection
  • Flexible height model for easy integration into machines and lines
  • IoT ready via IO-Link
  *1. IEC 60529/JIS C 0920 Annex 1

  Starting from∗ ：	685.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Safety Mat Controller for Safety Mat UMA Series

  OMRON

  Single-Channel Safety Mat / Edge Controller for use with UMA Safety Mats, Safety Edges and Safety Bumpers
  • Power requirements: 120 AC or 24V AC/DC input power in one unit.
  • Monitored manual or automatic reset modes.
  • Two safety outputs and 1 auxiliary output for signaling.
  • Delayed Auxiliary Output - Delayed opening of the auxiliary output for reversal of a door or gate may be selected.
  • External Device Monitoring - EDM is standard.

  Starting from∗ ：	665.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Smart Muting Actuator [F3W-MA] for Safety Light Curtain F3SG-RA

  OMRON

  Smart actuator for muting applications
  The F3W-MA smart muting actuator is an integrated sensor system utilizing multiple beam sensor technology to configure muting systems in combination with the safety light curtain.
  • Point-to-point detection mode for workpieces with constant shape
  • Chattering/void space prevention mode to prevent impact of small object holes

  Starting from∗ ：	590.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Ultra-flat Multi-beam Sensor for Elevators [F3E]

  OMRON

  • Ultra-flat 9 mm shape for easy design-in in elevator constructions
  • Highest ambient light immunity (200,000 lux) for installations with direct sunlight exposition
  • Triple crossing resolution maintained close to zero distance
  • Robust aluminum housing
  • Ray failure toleration
  • Test input
  • Built-in amplifier (operation with 10-30 VDC)
  • Fulfills requirements of EN81-70

  Starting from∗ ：	515.78 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Adjustable Side-Mount Bracket Set for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam

  OMRON

  Bracket that allows beam adjustment after the light curtain is installed
  • Vertical adjustment
  Angle adjustment range: ±15°
  • Side mounting and backside mounting
  • Two brackets per set

  Starting from∗ ：	33.87 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Adjustable Top/Bottom Bracket Set for F3SJ/F3SN Adapter

  OMRON

  • Used at the top and bottom of the light curtain
  • Angle adjustment range : ±22.5°
  • For replacement of F3SJ or F3SN Series
  • Side mounting and backside mounting
  • Two brackets per set

  Starting from∗ ：	22.58 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Bluetooth® Communication Unit for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam

  OMRON

  Easy on-site monitoring
  The Bluetooth ® communication unit allows you to monitor information about device stoppages on mobile devices.

  Starting from∗ ：	97.90 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Cables for Safety Mat UMA Series

  OMRON

  Connecting a Mat to a MC3 Safety Mat Controller, SCC-1224A Safety Mat/Edge Controller or NX-series Safety Controller

  Starting from∗ ：	51.75 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Cascading Cable for Extended for F3SG-SR Safety Light Curtain (for Emitter and Receiver)

  OMRON

  For emitter and receiver, two cables per set

  Starting from∗ ：	121.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Cascading Cable for F3SG-R Safety Light Curtain (for Emitter and Receiver)

  OMRON

  2 cables per set, one for emitter and one for receiver

  Starting from∗ ：	110.90 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Floor Mount Column for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam [F39-ST]

  OMRON

  Flexible protection
  This column can be installed independently of equipment or fences, almost anywhere.

  Starting from∗ ：	148.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Intelligent Tap for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam

  OMRON

  Used to configure the F3SG-SR/PG and connect external devices via IO-Link.

  Starting from∗ ：	227.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Lamp for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam

  OMRON

  Output status can be checked at a glance.
  Output information can be assigned to the lamp and ABI.
  Status, such as light intensity drop, can be checked from a distance.
  Note: The Lamp does not support Bluetooth ® communication.

  Starting from∗ ：	20.98 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Lightcurtain in Robust Aluminium Housing [F3ET2]

  OMRON

  The F3ET2 lightcurtains provide a reliable area monitoring in a robust housing. The M12 5-pin connectors and optical synchronisation between emitter and receiver allow a fast and simple installation without special requirements.
  • Optical synchronisation for reliable operation without additional wiring
  • Robust aluminium housing
  • NPN/PNP and light on/dark on selectable

  Starting from∗ ：	813.43 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Measuring Lightcurtain in Robust Aluminium Housing [F3EM2]

  OMRON

  The F3EM2 provides easy to install and set up height and profile measurement. The analog output provides a simple overall height detection and the serial output models provide single beam evaluation for profile measurements.
  • Robust aluminium housing
  • Analog output for simple height detections
  • Serial output with single beam evaluation for profile measurement
  • Various output modes to adapt output data to the given application

  Starting from∗ ：	1,015.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Mirror Columns for F3SG-PG-series Safety Multi-Light Beam [F39-PML]

  OMRON

  The use of mirror columns allows wiring at one location for protection around perimeters of equipment. They reduce wiring duct design and wiring time.

  Starting from∗ ：	253.30 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Mount-Column Adjustable Base for Floor Mount Column and Mirror Column for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam

  OMRON

  Optional accessory (sold separately)
  For easy installation and wiring of muting sensors

  Starting from∗ ：	119.70 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Mounting Brackets for Safety Laser Scanner OS32C

  OMRON

  [Specifications]
  ・OS32C-BKT1:
  ・Bottom/side mounting bracket x 1, unit mounting screws x 4 sets
  OS32C-BKT2:
  ・XY axis rotation mounting bracket x 1, unit mounting screws x 6 sets, bracket mounting screws x 1 set(must be used with OS32C-BKT1)
  OS32C-BKT3:
  ・Simple mounting brackets x 2, unit mounting screws x 4 sets

  Starting from∗ ：	135.78 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Muting Lamp for Muting Controller F3SP-U4P

  OMRON

  Muting lamp, to be used with F3SP controllers

  Starting from∗ ：	100.03 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Muting Sensor Arm Mounter Bracket for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam

  OMRON

  Optional accessory (sold separately)
  For easy installation and wiring of muting sensors

  Starting from∗ ：	32.43 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Muting Sensor Arm Mounter for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam

  OMRON

  Reduced installation work
  The muting sensor arm mounter facilitates installation of a muting sensor.

  Starting from∗ ：	66.40 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Muting Sensor Connection Box for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam

  OMRON

  Reduced wiring time and costs
  The connection box simplifies wiring for muting , and only one cable is used to connect to the control panel.

  Starting from∗ ：	205.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Power Cable for Safety Laser Scanner OS32C

  OMRON

  One cable is required per sensor.

  Starting from∗ ：	211.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Protective Cover for Window for Use with Safety Laser Scanner OS32C

  OMRON

  [Specifications]
  ・Applicable Series: OS32C
  
  Protective Cover for Window for Use with Safety Laser Scanner OS32C

  Starting from∗ ：	140.18 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Root-Plug Cable for Extended for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam

  OMRON

  [Specifications]
  ・Cable Length(m): 0.3
  
  F39-JGR3K-D:
  ・For receiver or
  ・emitter/receiver of F3SG-PG
  ・Perimeter Guarding Passive Mirror
  ・To sensors: dedicated connector
  ・To external: M12 connector type (8-pin)
  ・Color: Black
  F39-JGR3K-L:
  ・For emitter
  ・To sensors: dedicated connector
  ・To external: M12 connector type (5-pin)
  ・Color: Gray

  Starting from∗ ：	23.92 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Safety Laser Scanner [OS32C]

  OMRON

  OS32C Safety Laser Scanner
  • Type 3 Safety Laser Scanner complies with IEC61496-1/-3.
  • 70 sets of safety zone and warning zone combinations are available, supporting complicated changes in working environments.
  • A safety radius up to 4 m and warning zone(s) radius up to 15 m can be set.
  • Configurable minimum object resolution of 30, 40, 50 or 70 mm, for hand and arm detection applications
  • 8 Individual Sector Indicators and various LED indications allow the user to determine scanner status at a glance.
  • Reference Boundary Monitoring function prevents unauthorized changes in the scanner position.
  EtherNet/IP for Status and Measurement Data
  The OS32C with EtherNet/IP can be monitored by ODVA EtherNet/IP compliant products such as PLCs and HMIs. System status, zone status, and measurement data can all be monitored over EtherNet/IP.

  Starting from∗ ：	6,665.42 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Safety Light Curtain [F3SJ-A]

  OMRON

  High-functional ADVANCED type supports finger protection and special applications.
  • Detection capability supports finger protection.
  • Equipped with wide variety of functions such as partial muting and blanking functions.
  • The system status can be checked with PC tool.

  Starting from∗ ：	3,386.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Safety Light Curtain [F3SJ-B]

  OMRON

  Basic Type with a combination of performance and functionality
  • Up to three sets of series-connected sensors.
  • The muting function is enabled simply with Muting Key Cap.
  • Comes standard with interlock and auxiliary output functions.

  Starting from∗ ：	3,318.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Safety Light Curtain, Advanced Type [F3SG-RA]

  OMRON

  Offers Both Durability and Reliability
  • Rugged and compact
  • New muting function to increase both productivity and safety
  • All models designed for global use. PNP/NPN selection by DIP switch
  • Conforming to major international standards including Chinese standard GB/T 4584

  Starting from∗ ：	884.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Safety Light Curtain, Easy Type [F3SG-RE]

  OMRON

  Easy-to-use Safety Sensor Ideal for Simple On/Off Detection Applications
  • Provides simple safety functions - saving TCO by reducing errors
  • Simple wiring with only 4 wires
  • Fast response time of 5 ms

  Starting from∗ ：	578.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Safety Light Curtain, IP69K Model [F3SG-SR-K]

  OMRON

  IP69K protection for high-pressure wash-down applications
  • Offers the same specifications and functionality as F3SG-4SRB[][] standard model.
  • Detection capability of 14- and 25-mm dia.
  • Conforms to major international standards

  Starting from∗ ：	2,551.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Safety Multi-Light Beam [F3SG-PG]

  OMRON

  Easy to monitor and ready for IoT
  • Conforms to major international standards
  • Environmental resistance and rugged structure for use in various environments (IP67, IP67G*1, IP69K)
  • A broad line-up, from finger protection to body protection
  • Flexible height model for easy integration into machines and lines
  • IoT ready via IO-Link
  *1. IEC 60529/JIS C 0920 Annex 1

  Starting from∗ ：	935.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Scan Window for Safety Laser Scanner OS32C

  OMRON

  OMRON Scan Window for Safety Laser Scanner OS32C
  Spare for replacement

  Starting from∗ ：	262.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Sensor Block without I/O Block, Ver.2 for Safety Laser Scanner OS32C

  OMRON

  [Specifications]
  ・Voltage Type: DC
  ・Length(mm): 103
  ・Width(mm): 105
  ・Height(mm): 105
  
  Accessory safety, laser scanner, spare for replacement, sensor block without I/O block, Ver.2

  Starting from∗ ：	5,780.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Sentir Edge Safety Edge 35 x 55 mm

  OMRON

  Safety technology - Sentir Edge safety edge - on a roll

  Starting from∗ ：	830.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Standard Bracket (Intermediate Bracket) for F3SG-SR/PG Safety Light Curtain/Safety Multi-Light Beam

  OMRON

  Bracket used when beam adjustment is not required after the light curtain is installed
  • Side mounting and backside mounting
  • Beams not adjustable after installation
  • Two brackets per set
  • Suitable for mounting on an aluminum profile so that its center is aligned with the center of beams.

  Starting from∗ ：	29.25 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...