SANDVIK Holding Tools for I.D. Tuning
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
SANDVIK Coromant Capto to Fine Boring Head Adaptor
SANDVIK
[Specifications]
・Type: Fine boring head
・Processing type: Finishing-bore tolerance IT6
・Minimum Machining Diameter: 3mm
・Cutting Direction: Neutral
・eClass-5.1: 21021105Starting from∗ ： 1,245.23 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK CoroTurn 111 Boring Bar for Back Boring
SANDVIK
[Specifications]
・Type: Boring bar
・Minimum Machining Diameter:21.59mm
・Cutting Direction: Right-hand
・Overall Length L1: 203.2mm
・Clearance angle: 11º
・eClass-5.1: 21010903
[Features]
・Positive insert shape
・Low cutting forces
・Excellent edge strength
・Screw clamping ensures stability and unobstructed chip flow
・Tools with high pressure coolant
・Insert geometries and grades for all materialsStarting from∗ ： 194.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK CoroBore 826 XL Fine Boring Tool
SANDVIK
[Specifications]
・Minimum Machining Diameter: 148, 198, 248mm
・Cutting Direction: Neutral
・Overall Length L1: 90, 136mm
・Cooling lubricant: Yes - through center
・eClass-5.1: 21021105
[Features]
・CoroBore XL is the first choice for large-diameter fine boring.
・The tools can be adjusted radially in order to cover a certain diameter range with one tool.
・The tools allow precision adjustment in microns in order to achieve close hole tolerances
・CoroTurn 107 and CoroTurn 111 inserts with dedicated grades and geometries for all materials
・Excellent surface finish with wiper inserts
・Tool holders optimized for large-diameter boring
・Available with damped Silent Tools adapters for vibration-free boring in diameters 148–315 mm (5.827–12.402 inch), even at long overhangs
・Also available as lightweight tools: CoroBore lightweight boring tools reduce tool weight and tool change moment, enabling easier handling and larger diameters
・826Min. Shipping Days ： 5 Days -
Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SCLCR / L-R
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 362.20 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 523.29 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SANDVIK Coromant Capto Reduction Adaptor
SANDVIK
[Specifications]
・Type: Reducing adapter, Reducing element
・Cutting Direction: Neutral
・Coolant: Yes-radial KSS, Yes-through center
・eClass-5.1: 21021105
[Features]
・Three systems in one
・High torque transmission
・High bending strength
・Quick change and automated tool change
・Advanced nozzle technology for process security even at low pressures
・Through-tool delivery of high-pressure coolant, from machine to cutting edge
・Balanced and concentric
・Self-centeringStarting from∗ ： 473.54 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK CoroBore 825 Fine Boring Head
SANDVIK
[Specifications]
・Type: Fine boring head
・Processing type: Finishing-bore tolerance IT6
・Minimum Machining Diameter: 150mm
・eClass-5.1: 21021105Starting from∗ ： 1,645.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK Coromant Capto Extension Adaptor
SANDVIK
[Specifications]
・Type: Extending element, Reducing element
・Cutting Direction: Neutral
・Coolant: Yes - through center
・eClass-5.1: 21021105
[Features]
・High torque transmission
・High bending strength
・Quick change and automated tool change
・Advanced nozzle technology for process security even at low pressures
・Through-tool delivery of high-pressure coolant, from machine to cutting edge
・Balanced and concentric
・Self-centeringStarting from∗ ： 469.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar for Turning CXS-..T098
SANDVIK
[Features]
CoroTurn XS, Insert Bar
Coating Carbide
Boring Bar for Small Diameter Machining
For lathe turning- Volume Discount
Starting from∗ ： 49.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn SL Coromant Capto Dampened Boring Tool Bit, C-570-3C
SANDVIK
[Features]
An interchangeable-head-type boring bit.
Includes a dampening function, ensuring minimal chatter even with long protrusions.
Has fewer tool points making inventory management easy and allowing the selection of multiple types of cutting unit.
For inner-diameter turning of all types of work material.Starting from∗ ： 1,530.38 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 242.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,326.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 581.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SANDVIK T-Max P Boring Bar for Turning
SANDVIK
[Specifications]
・Type: Boring bar
・Internal or external machining: Boring bar for internal machining
・Coolant: Yes
・For turning
・eClass-5.1: 21010903Min. Shipping Days ： 5 Days -
SANDVIK Steel Blank with Coromant Capto Coupling
SANDVIK
[Specifications]
・Type: Blank, Molding blank
・Coolant: No
・Cutting Direction: Neutral
・eClass-5.1: 21021105, 21029112Min. Shipping Days ： 5 Days -
SANDVIK CoroThread 266 Boring Bar for Thread Turning
SANDVIK
[Specifications]
・Type: Boring bar
・Cutting Direction: Right-hand, Left-hand
・Bracket: Clamping technology: Screw clamping system
・External or internal machining: Internal machining
・eClass-5.1: 21010903
[Features]
・Highly rigid external and internal thread turning
・Optimize your tool path
・iLock interface
・Precision coolant solutionStarting from∗ ： 247.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 701.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVQCR / L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Starting from∗ ： 200.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 242.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 547.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Sandvik COROMANT CAPTO Manual Clamp Holder
SANDVIK
[Features]
· Clamping unit.
· Features the high precision and rigidity of Coromant Capto. Can be used for quick changes.
[Applications]
· For any turning.Starting from∗ ： 1,954.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SANDVIK CoroTurn 107 Boring Bar for Back Boring
SANDVIK
[Specifications]
・Type: Boring bar
・Cutting Direction: Right-hand, Left-handm
・For back boring
・eClass-5.1: 21010903Starting from∗ ： 247.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK Coromant Capto to Weldon Adaptor
SANDVIK
[Specifications]
・Type: Adapter
・Cutting Direction: Neutral
・Coolant: Yes-through center
・eClass-5.1: 21021105Min. Shipping Days ： 5 Days -
SANDVIK Boring Adaptor
SANDVIK
[Specifications]
・Type: Miller mandrel holder
・Processing type: Rough machining-bore tolerance IT9
・Minimum Machining Diameter: 99mm
・eClass-5.1: 21021101Min. Shipping Days ： Quote -
SANDVIK Coromant Capto to Quick Change Tapping Chuck
SANDVIK
[Specifications]
・Type: Adapter
・Cutting Direction: Neutral
・Shank diameter : 19, 31, 48mm
・eClass-5.1: 21021105Min. Shipping Days ： 5 Days -
SANDVIK Coromant Capto to CoroTurn SL Damped Adaptor
SANDVIK
[Specifications]
・Type: Boring bar, Vibration-damped boring bar
・Cutting Direction: Right-hand, Left-hand, Neutral
・Minimum Machining Diameter: 20-80mm
・Overall Length L1: 125-968mm
・eClass-5.1: 21021105
[Features]
・Modular system of adapters and cutting heads
・For internal turning, grooving, threading, boring and multi-task machining
・For hole diameters down to 20 mm
・For machining in turning centers, lathes and multi-task machines
・CoroTurn SL cutting heads feature precision coolant nozzles for improved chip control and process security
・Quick change cutting heads as an option – easy-to-adjust cutting head for more flexible productionStarting from∗ ： 1,468.85 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK CoroBore 826 Fine Boring Head
SANDVIK
[Specifications]
・Type: Fine boring head
・Minimum Machining Diameter: 150mm
・Overall Length L1: 24mm
・Shank diameter: 34mm
・eClass-5.1: 21021105
[Features]
A34-R826C-E024HP:
・The CoroBore XL system for large-diameter rough boring gives a rigid and reliable performance in larger bores and is designed to generate the required hole quality and diameter. The bridges and holders enable rough boring to be completed with high productivity
A34-R826C-E 017:
・The CoroBore XL system is a group of large-diameter boring tools. The wide application range covers rough and fine boring, interpolation turning as well as face grooving and the unique SpiroGrooving methodStarting from∗ ： 1,645.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK CoroBore 825 XL Fine Boring Tool
SANDVIK
[Specifications]
・Cutting Direction: Neutral
・Processing type: Finishing - bore tolerance IT6
・Cooling lubricant: Yes - through center
・eClass-5.1: 21021105
[Features]
・CoroBore XL is the first choice for large-diameter fine boring. The tools can be adjusted radially in order to cover a certain diameter range with one tool. The tools allow precision adjustment in microns in order to achieve close hole tolerances
・CoroTurn 107 and CoroTurn 111 inserts with dedicated grades and geometries for all materials
・Excellent surface finish with wiper inserts
・Tool holders optimized for large-diameter boring
・Available with damped Silent Tools adapters for vibration-free boring in diameters 148–315 mm (5.827–12.402 inch), even at long overhangs
・Also available as lightweight tools: CoroBore lightweight boring tools reduce tool weight and tool change moment, enabling easier handling and larger diametersStarting from∗ ： 3,851.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SANDVIK Cylindrical Shank to CoroTurn SL Damped Adaptor
SANDVIK
[Specifications]
・Type: Boring bar
・Cutting Direction: Neutral
・eClass-5.1: 21021105
[Features]
・CoroTurn SL cutting heads feature precision coolant nozzles for improved chip control and process security
・Quick change cutting heads as an option – easy-to-adjust cutting head for more flexible productionStarting from∗ ： 1,853.23 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 242.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 74.48 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 242.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn SL 570-R / L / N
SANDVIK
CoroTurn SL is a modular system of adapters and cutting heads that allows the construction of customized tools for a variety of turning operations with a minimum number of itemsStarting from∗ ： 606.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 547.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 827.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 475.78 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 1,163.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,163.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 481.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 721.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 479.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 479.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SANDVIK CoroBore 820 XL Rough Boring Tool
SANDVIK
[Specifications]
・Cutting Direction: Neutral
・eClass-5.1: 21021105
[Features]
・Reliable system with rigid interfaces between head and cartridge for stable and vibration-free boring
・Optimized cartridges designed for highest stability
・Internal coolant through the tools to the cutting edgeMin. Shipping Days ： 5 Days -
SANDVIK Cylindrical Shank to CoroTurn SL Quick Change Damped Adaptor
SANDVIK
[Specifications]
・Type: Boring bar, Vibration-damped boring bar
・Cutting Direction: Right-hand, Neutral
・eClass-5.1: 21021105Min. Shipping Days ： 5 Days -
SANDVIK MAS-BT 403 to CoroBore XL Adaptor
SANDVIK
[Specifications]
・Type: Holder
・Cutting Direction: Neutral
・Tool-side holder size/ Coupling size: ø 40.00 mm
・Overall Length L1: 80mm
・eClass-5.1: 21021104Starting from∗ ： 885.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Applicable Tip Shape |
| Minimum Machining Diameter |
| Application |
| Cutting Direction |
| Clamp Shape |
| Overall Length L1 |
| Clearance angle |
| Shank diameter |
| Protrusion length (L/D) |
| Lubrication Hole Y/N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SCLCR / L-R | CoroTurn SL Coromant Capto Dampened Boring Tool Bit, C-570-3C | Coromant Capto Cutting Head For Inner-Diameter Turning SVQBR / L | Cartridge T-Max P Lever Clamp For Negative Inserts PTSNR / L | Coromant Capto Cutting Head For Inner-Diameter Turning PDUNR / L | Coromant Capto Cutting Head For Inner-Diameter Turning PSKNR / L | Coromant Capto Cutting Head For Inner-Diameter Turning SCLCR / L | Coromant Capto Cutting Head For Inner-Diameter Turning SDUCR / L | SANDVIK Cylindrical Shank to CoroTurn SL Quick Change Damped Adaptor | ||||||||||||||||||||||||||||||||||||
| Starting from∗ | 1,245.23 € *Unit price with basic configuration | 194.38 € *Unit price with basic configuration | - | 362.20 € *Unit price with basic configuration | 523.29 € *Unit price with basic configuration | 473.54 € *Unit price with basic configuration | 1,645.69 € *Unit price with basic configuration | 469.15 € *Unit price with basic configuration | 49.55 € *Unit price with basic configuration | 1,530.38 € *Unit price with basic configuration | 242.34 € *Unit price with basic configuration | 1,326.11 € *Unit price with basic configuration | 581.45 € *Unit price with basic configuration | - | - | 247.00 € *Unit price with basic configuration | 701.39 € *Unit price with basic configuration | 200.41 € *Unit price with basic configuration | 242.34 € *Unit price with basic configuration | 547.63 € *Unit price with basic configuration | 1,954.35 € *Unit price with basic configuration | 247.69 € *Unit price with basic configuration | - | - | - | 1,468.85 € *Unit price with basic configuration | 1,645.69 € *Unit price with basic configuration | 3,851.15 € *Unit price with basic configuration | 1,853.23 € *Unit price with basic configuration | 242.34 € *Unit price with basic configuration | 74.48 € *Unit price with basic configuration | 242.34 € *Unit price with basic configuration | 606.73 € *Unit price with basic configuration | 547.63 € *Unit price with basic configuration | 827.86 € *Unit price with basic configuration | 475.78 € *Unit price with basic configuration | 1,163.14 € *Unit price with basic configuration | 1,163.14 € *Unit price with basic configuration | 481.57 € *Unit price with basic configuration | 721.46 € *Unit price with basic configuration | 479.37 € *Unit price with basic configuration | 479.37 € *Unit price with basic configuration | - | - | 885.69 € *Unit price with basic configuration |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 8 Days | 8 Days | 5 Days | 5 Days | 5 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | Quote | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days |
| Applicable Tip Shape | - | - | - | C (80° Diamond-Shape) | C (80° Diamond-Shape) | - | - | - | - | - | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | - | - | - | - | V (35° Diamond-Shaped) | T (Triangle) | - | - | - | - | - | - | - | - | - | - | S (Rectangular) | - | T (Triangle) | - | - | T (Triangle) | V (35° Diamond-Shaped) | - | - | D (55° Diamond-Shape) | S (Rectangular) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | - | - | - |
| Minimum Machining Diameter | 3 | 21.59 | 148 ～ 248 | 10 | 34 ～ 56 | - | 150 | - | 0.3 ～ 7.2 | 20 ～ 50 | 20 ～ 50 | 19 ～ 136 | 22 ～ 63 | 20 ～ 82.499 | - | 20 ～ 63 | - | 22 | 20 ～ 55 | - | - | 26.6954 ～ 40.1066 | - | 99 | - | 20 ～ 80 | 150 | 148 ～ 1018 | 19.9898 ～ 80.01 | 40 ～ 55 | 1.95 ～ 7.2 | 50 ～ 55 | - | - | - | - | - | - | 32 ～ 63 | 32 ～ 63 | 20 ～ 63 | 20 ～ 63 | 148 ～ 1018 | 99.9998 ～ 275 | - |
| Application | - | - | - | Internal Diameter | Internal Diameter | - | - | - | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter / Inner diameter profiling | - | - | - | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter | - | - | - | - | - | - | - | - | - | Internal Diameter | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling / Pull | - | - | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | - | - | - |
| Cutting Direction | IKOU | Right-hand | IKOU | Right-hand / Left-hand | Right-hand / Left-hand | IKOU | - | IKOU | Right-hand / Left-hand | - | Right-hand / Left-hand | - | Right-hand / Left-hand | Right-hand / Left-hand | IKOU | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | - | Right-hand / Left-hand | IKOU | - | IKOU | Right-hand / Left-hand / IKOU | - | IKOU | IKOU | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | - | - | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | IKOU | Right-hand / IKOU | IKOU |
| Clamp Shape | - | - | - | Screw-on | Lever lock | - | - | - | - | - | Screw-on | Screw-on | Screw-on | - | - | - | - | Screw-on | Screw-on | - | - | - | - | - | - | - | - | - | - | - | - | Lever lock | - | - | Cable clamp | Screw-on | - | - | Screw-on | Screw-on | Screw-on | Screw-on | - | - | - |
| Overall Length L1 | 48 ～ 85 | 203.2 | 90 ～ 136 | 125 | 28 ～ 42 | 90 ～ 110 | - | - | 27.25 ～ 72.25 | - | 25.5 ～ 57.2 | - | - | 200 ～ 400.101 | 60 ～ 200 | 125 ～ 406.4 | 24.1 ～ 62.7 | 200 | 25 ～ 63 | - | - | 250 ～ 304.8 | - | - | - | 125 ～ 968 | 24 | 90 ～ 218 | 199.898 ～ 849.12 | 52.2 ～ 66.1 | 52.25 | 57.2 ～ 63.2 | - | - | - | 14 | - | - | - | - | - | - | 82 ～ 218 | 880 ～ 4000 | 80 |
| Clearance angle | - | - | - | 7° | - | - | - | - | - | - | - | - | 5° | - | - | - | - | 7° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0° | 5° | - | - | - | - | 7° | 7° | - | - | - |
| Shank diameter | - | 15.88 | 33 | 8 | 25 ～ 40 | - | - | - | 4 ～ 7 | - | - | - | - | 15.88 ～ 63.5 | 32 ～ 160 | 15.88 ～ 50.8 | 16 ～ 32 | 16 | - | - | - | 19.05 ～ 31.75 | 6 ～ 50 | - | 19 ～ 48 | 16 ～ 60 | 34 | 33 ～ 40 | 15.88 | 16 ～ 60 | 63.5 | - | 5 ～ 7 | - | - | - | 80 | 32 | - | - | - | - | - | - | 33 ～ 100 | 11.6 | 80 ～ 80 | 250 | - |
| Protrusion length (L/D) | - | - | - | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | 24～64 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lubrication Hole Y/N | - | - | - | Available | Available | - | - | - | N/A | Available | N/A | Available | Available | - | - | - | N/A | Available | N/A | Available | - | - | - | - | - | - | - | - | - | N/A | N/A | N/A | Available | Available | N/A | N/A | Available | Available | Available | Available | Available | Available | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Applicable Tip Shape
-
Minimum Machining Diameter
- 0.3
- 0.5
- 0.6
- 0.9
- 1
- 1.5
- 1.95
- 2
- 2.5
- 3
- 3.2
- 3.5
- 4
- 4.2
- 4.5
- 5
- 5.0 mm
- 5.2
- 5.5
- 6
- 6.0 mm
- 6.2
- 6.5
- 6.604
- 7
- 7.2
- 7.5
- 8
- 8.0 mm
- 8.2042
- 8.5
- 8.6868
- 9
- 10
- 10.0 mm
- 10.2108
- 10.4902
- 11
- 12
- 12.0 mm
- 12.192
- 12.7
- 13
- 14
- 14.0 mm
- 15
- 15.1892
- 16
- 16.3068
- 17
- 17.2974
- 18
- 18.0 mm
- 18.4912
- 18.9992
- 19
- 19.6088
- 19.9898
- 20
- 20/30
- 20.1
- 20.62
- 21
- 21.59
- 22
- 23
- 23.5966
- 24.892
- 24.9
- 24.99
- 24.9936
- 24.994
- 25
- ø25
- 25/37
- 25.4
- 25.7048
- 26
- 26.01
- 26.6954
- 27
- 28
- 29
- 30
- 30.505
- 30.5054
- 31
- 31.496
- 31.5
- 31.801
- 32
- ø32
- 32.004
- 32.512
- 32.9946
- 32.995
- 33
- 33 mm
- 34
- 35
- 35.45
- 36.45
- 37
- 37.287
- 37.2872
- 37.313
- 37.45
- 38
- 38.1
- 38.45
- 38.913
- 39.45
- 40
- 40/55
- 40.005
- 40.01
- 40.1
- 40.1066
- 40.132
- 40.45
- 41
- 41.45
- 41.5
- 42.45
- 43
- 43.307
- 43.45
- 44
- ø44
- 44.45
- 44.704
- 45
- 45.0088
- 45.45
- 46
- 46.45
- 46.99
- 47
- 47.45
- 48
- 48.45
- 49.3014
- 49.45
- 50
- 50 mm
- 50/75
- 50.01
- 50.0126
- 50.038
- 50.45
- 50.8
- 51
- 51.45
- 52
- 52.45
- 53
- 53.45
- 54
- 54.0004
- 54.45
- 54.99
- 55
- 55.35
- 56
- 56.35
- 57
- 57.35
- 58.35
- 59.35
- 59.99
- 60
- 60/75
- 60.35
- 61.01
- 61.011
- 61.35
- 62
- ø62
- 62.35
- 62.992
- 63
- 63.35
- 63.5
- 63.98
- 64
- 64.35
- 64.7954
- 65
- 65.35
- 66.35
- 67.35
- 67.894
- 68
- 68.35
- 69
- 69.35
- 70
- 70/90
- 70.35
- 71.35
- 72
- 72.35
- 73.35
- 74.35
- 75
- 75.01
- 75.35
- 76.35
- 77.013
- 77.35
- 78.35
- 79.35
- 80
- 80.01
- 80.35
- 81.35
- 82.35
- 82.499
- 83
- 83.35
- 84.35
- 85
- 85.35
- 86
- 86.35
- 87.35
- ø88
- 88.35
- 89
- 89.35
- 90
- 90.35
- 98
- 99
- 99.9998
- 100
- 105
- 106
- 109
- 111.35
- 115
- 119.9896
- 120
- 123
- ø125
- 130
- 132.35
- 135
- 136
- 139.7
- 140
- 145
- 148
- 150
- 153.35
- 166
- 170
- 172.72
- 188
- 198
- 212
- 220
- 223.52
- 228
- 248
- 250
- 258
- 275
- 279.4
- 298
- 378
- 458
- 538
- 778
- 1018
-
Application
-
Cutting Direction
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Lever lock
- Wedge Lock
- Other
-
Overall Length L1
-
Clearance angle
-
Shank diameter
-
Protrusion length (L/D)
-
Lubrication Hole Y/N
Narrow search by specifying Brand
-
- SANDVIK (290)
- KYOCERA (86)
- BIG KAISER (9)
- NGK SPARK PLUG (9)
- MANYO TOOLS (6)
- SHOWA TOOL (1)
- THE CUT (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Holding Tools for I.D. Tuning
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.