TRUSCO NAKAYAMA Lathe Jigs
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Soft Jaw (for Victor)【3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
- Correction sharpener is easy to use, and it also uses S45C steel which has a proper hardness. Furthermore, the occurrence of lowering and master key mounting distortions and restoration accuracy after re-mounting (run out) is subjected to careful consideration when deep processing.Starting from∗ ： 108.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lathe Center (Long Type, with Extra-Hard Tip)
TRUSCO NAKAYAMA
[Features]
- By lengthening the lace center, the widening work efficiency of the spacing between the workpiece and the tailstock becomes better.
[Use]
For runout prevention of work pieces.Starting from∗ ： 239.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Soft Jaw (for Kitagawa)【3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
- Correction sharpener is easy to use, and it also uses S45C steel which has a proper hardness. Furthermore, the occurrence of lowering and master key mounting distortions and restoration accuracy after re-mounting (run out) is subjected to careful consideration when deep processing.Starting from∗ ： 60.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
HO1MA Soft Jaw (for HOWA)【2-3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
- Correction sharpener is easy to use, and it also uses S45C steel which has a proper hardness. Furthermore, the occurrence of lowering and master key mounting distortions and restoration accuracy after re-mounting (run out) is subjected to careful consideration when deep processing.Starting from∗ ： 54.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
High Jaw (for Both Howa and Kitagawa)【3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
- Correction sharpener is easy to use, and it also uses S45C steel which has a proper hardness. Furthermore, the occurrence of lowering and master key mounting distortions and restoration accuracy after re-mounting (run out) is subjected to careful consideration when deep processing.Starting from∗ ： 109.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Soft Jaw (for Soul)【3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
- Correction sharpener is easy to use, and it also uses S45C steel which has a proper hardness. Furthermore, the occurrence of lowering and master key mounting distortions and restoration accuracy after re-mounting (run out) is subjected to careful consideration when deep processing.Starting from∗ ： 89.01 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Soft Jaw (for Nikko)【1-3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
- Correction sharpener is easy to use, and it also uses S45C steel which has a proper hardness. Furthermore, the occurrence of lowering and master key mounting distortions and restoration accuracy after re-mounting (run out) is subjected to careful consideration when deep processing.Starting from∗ ： 63.18 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Soft Jaw (for Matsumoto)【3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
- Correction sharpener is easy to use, and it also uses S45C steel which has a proper hardness. Furthermore, the occurrence of lowering and master key mounting distortions and restoration accuracy after re-mounting (run out) is subjected to careful consideration when deep processing.Starting from∗ ： 71.62 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lathe Center
TRUSCO NAKAYAMA
[Features]
- All steel is pure.
[Use]
For runout prevention of work pieces.Starting from∗ ： 43.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lathe Center (Extra-Hard Tip)
TRUSCO NAKAYAMA
[Features]
-Is equipped with a carbide tip.
-Prevents vibration of the workpiece.
-Materials: carbon steel for the machine structure (EN 1.1191 Equiv.)Starting from∗ ： 89.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
"Half Center" (with Carbide Tip)
TRUSCO NAKAYAMA
[Features]
· The tip of the lathe center has been cut so as not to touch the workpiece.
[Applications]
· Prevents center deflection.Starting from∗ ： 286.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Umbrella-shaped Rotation Center
TRUSCO NAKAYAMA
[Features]
- A bearing entry.
[Applications]
- As the center tool of the tube center hole.Starting from∗ ： 200.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Mounting type |
| Compatible Chuck Nominal Size |
| Jaw Height(mm) |
| Compatible Manufacturer |
| Chuck Outer Diameter(mm) |
| Number of Jaws |
| Shank MT No |
| Tip Carbide Insert (Y/N) |
| Tip Width Across Flat(mm) |
| Auxiliary Jig Type |
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA |
| Product Series | ||||||||||||
| Starting from∗ | 108.56 € *Unit price with basic configuration | 239.57 € *Unit price with basic configuration | 60.94 € *Unit price with basic configuration | 54.72 € *Unit price with basic configuration | 109.34 € *Unit price with basic configuration | 89.01 € *Unit price with basic configuration | 63.18 € *Unit price with basic configuration | 71.62 € *Unit price with basic configuration | 43.09 € *Unit price with basic configuration | 89.36 € *Unit price with basic configuration | 286.29 € *Unit price with basic configuration | 200.32 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Type | Soft Jaw | Rotation Center / Lathe Center | Soft Jaw | Soft Jaw | Soft Jaw | Soft Jaw | Soft Jaw | Soft Jaw | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center |
| Mounting type | Upper and Lower Divided Jaw Type | - | Serrated Type / Upper and Lower Divided Jaw Type | Serrated Type | Serrated Type | Upper and Lower Divided Jaw Type | Serrated Type | Serrated Type | - | - | - | - |
| Compatible Chuck Nominal Size | 6 ～ 18 | - | 4 ～ 15 | 4 ～ 15 | 6 ～ 12 | 6 ～ 12 | 5 ～ 14～16 | 6 ～ 15～22 | - | - | - | - |
| Jaw Height(mm) | 36 ～ 67 | - | 23 ～ 120 | 25 ～ 70 | 60 ～ 120 | 35 ～ 90 | 34 ～ 90 | 34 ～ 62 | - | - | - | - |
| Compatible Manufacturer | Victor | - | Kitagawa | Howa | Howa | Other | Nikko | Matsumoto | - | - | - | - |
| Chuck Outer Diameter(mm) | 152.4 ～ 457.2 | - | 101.6 ～ 381 | 101.6 ～ 381 | 152.4 ～ 304.8 | 152.4 ～ 304.8 | 127 ～ 355.6～406.4 | 152.4 ～ 381～558.8 | - | - | - | - |
| Number of Jaws | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank MT No | - | MT2 ～ MT5 | - | - | - | - | - | - | MT1 ～ MT6 | MT1 ～ MT6 | MT1 ～ MT5 | MT2 ～ MT5 |
| Tip Carbide Insert (Y/N) | - | Yes | - | - | - | - | - | - | N/A | Yes | Yes | N/A |
| Tip Width Across Flat(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Auxiliary Jig Type | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Type
- Soft Jaw
- Soft Jaw Molding Jig / Soft Jaw Molding Holder
- Lathe Chuck
- Rotation Center / Lathe Center
- Scroll Chuck Handle
- Jaw Nut
- Tailstock / Auxiliary Jig
-
Mounting type
-
Compatible Chuck Nominal Size
- B-212
- B-210
- B-208
- B-206
- B-205
- B-21
- B-15
- B-12
- B-10
- B-08
- B-06
- 4
- 5
- Type B 05
- Type HJ 5
- 5、6、8
- 5～8
- 6
- Type B 06
- Type GO 6
- 6、8、10
- 6～10
- 7
- 7・8
- 8
- Type B 08
- Type H 8-46
- 8、10、12
- 8～12
- 9
- 9・10
- 10
- Type B 10
- Type GO 10
- Type H 10-67
- 12
- Type B 12
- Type HJ 12
- 14～16
- 15
- Type B 15/18
- 15～22
- 16
- 18
- 21
- Type B 21/24
- Type HJ 24
- 80
- 110
- 130
- 140
- 160
- 165
- 200
- Type B 204/205
- Type B 206
- Type B 208
- Type B 210
- Type B 212
- Type B 215
- 250
- 385
- 400
- 460
- 500
-
Jaw Height(mm)
-
Compatible Manufacturer
-
Chuck Outer Diameter(mm)
- 50
- 63
- 80
- 100
- 101.6
- 112
- 125
- 127
- 132
- 152.4
- 165
- 167
- 177.8
- 177.8・203.2
- 190
- 192
- 200
- 203.2
- 228.6
- 228.6・254
- 232
- 254
- 273
- 304.8
- 310
- 355.6～406.4
- 381
- 381～558.8
- 457.2
-
Number of Jaws
-
Shank MT No
-
Tip Carbide Insert (Y/N)
-
Tip Width Across Flat(mm)
-
Auxiliary Jig Type
- Die Holder
- Dog
Narrow search by specifying Brand
-
- MISUMI (5)
- GIGA SELECTION (37)
- SANYOSEISAKUSYO (18)
- FUTAMURA MACHINES & TOOLS (15)
- TRUSCO NAKAYAMA (12)
- KABUTO MFG (11)
- TAKURA KOGU (7)
- KOBAYASHI IRON WORKS (5)
- OKUKAWATEKOUSYO (2)
- ARM SANGYO (2)
- KITAGAWA IRON WORKS (2)
- KAWASHIMO (1)
- NSK (1)
- NEW STRONG (1)
- TEIKOKU_CHUCK (1)
- THE CUT (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Lathe Jigs
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.