YANASE Wheels with Shafts
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Felt Wheel with Shaft
YANASE
Optimal for glazing and wiping of stainless steel and general metals.- Volume Discount
Starting from∗ ： 4.09 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Unilon Wheel with Shaft (Hard)
YANASE
Ideal for removal of scratches and rust. Can also be used for hairline finishing.
[Features]
· Selectable from abundant granularity and sizes.
· It removes burrs without scraping, with no secondary burrs.
· As it is soft, elastic and has good adaptability, it prevents fatigue.- Volume Discount
Starting from∗ ： 9.84 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Unilon Wheel with Shaft
YANASE
Prevents over-scraping, and produces a uniform finished surface with no clogging.
[Features]
· Unilon's standard product.
· Because the Unilon fibers are specially coated with abrasive, the intertwined fibers play the role of cushioning and prevent excessive grinding.
· Its autogenous properties prevent clogging.
· Polishes without scratching.
· Finishes the surface without scraping the material.
· Flexible and fits perfectly to the curved surfaces.- Volume Discount
Starting from∗ ： 14.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cup Disc
YANASE
A product which can polish both bottom and side surfaces at the same time.
[Features]
· The tip (bottom) can also be used for added convenience.
· Polishing cloth extends further than the shaft so the bottom and sides can be used for 2 surface simultaneous polishing.
· Unlikely to clog, allowing a uniform finish to be achieved throughout.
· It is elastic, easy to fit to the workpiece.
· Due to heat dissipation, it does not alter the polished material.
· Excellent autogenous properties.
· Ideal for polishing flat surfaces, bottom surfaces and corners- Volume Discount
Starting from∗ ： 15.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Mushroom Buff
YANASE
Ideal for finishing rounded mirror surfaces.
[Features]
· Mushroom shape fits firmly to any rounded surface for polishing.
· For finishing rounded mirror surfaces. Use by applying an abrasive.- Volume Discount
Starting from∗ ： 11.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flap With Mugen Shaft
YANASE
[Features]
· Flap wheel that is easy to use and does not scratch the workpiece easily, since both sides are cap-less and metal fittings are not used.
· Tough abrasive cloth is used to achieve both grinding power and durability.
· The paper is flexible and resilient, for a tight fit with the workpiece when grinding.
· Deburring of metals and rust-removal.
· For general metal surface grinding, such as flat surfaces, curved surfaces and inner surfaces.
· Suitable for grinding in narrow parts that are difficult to reach with the tips of the flaps.- Volume Discount
Starting from∗ ： 6.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flannel Wheel with Shaft
YANASE
Use for the final wiping of a mirrored surface finish.
[Features]
· For the final wiping of mirrored surface work.
· Alumina oxide permeated type.
· Use for final finishing.
· Provides a further beautiful finish.- Volume Discount
Starting from∗ ： 16.76 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flap Wheels with Shaft
YANASE
High-quality standard products that come in a vast variety of sizes and grain sizes.
[Features]
· A wide range of sizes and particle sizes with high quality.
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.- Volume Discount
Starting from∗ ： 7.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Small-Diameter Buff
YANASE
Various materials are available, such as cotton, chamois, flannel, muslin, wool, emery, hemp, etc.- Volume Discount
Starting from∗ ： 7.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Sisal Wheel with Shaft
YANASE
Ideal for pre-polishing polish with a cotton wheel.
[Features]
· For semi-finishing of mirror finishing.
· Alumina oxide permeated type.
· Finishing and polishing of stainless steel, aluminum and other materials.
· For scorch removal.
· For polishing before a mirror finish.
· Ideal for polishing prior to cotton wheel polishing- Volume Discount
Starting from∗ ： 21.30 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
FF Wheel
YANASE
Felt buff processed into flap shape for less clogging and burning.
[Features]
· For polishing and wiping with soft contact.
· Felt sheet cut into smaller pieces and processed into a flap shape for less clogging and burning.
· Use with application of abrasive.- Volume Discount
Starting from∗ ： 12.62 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Felt Wheel with Shaft Impregnated Type
YANASE
The product is permeated with alumina oxide, so it can be used as is.- Volume Discount
Starting from∗ ： 11.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cotton Wheel with Shaft
YANASE
Ideal for mirror-finish machining after machining with a sisal wheel
[Features]
· Detailed final touches of the mirrored finish.
· Alumina oxide permeated type.
· For finish polishing before using a felt disc.
· Ideal for mirror finishing.
· Finish after sisal wheel machining will be even more beautiful- Volume Discount
Starting from∗ ： 18.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cushioning Cone
YANASE
Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.- Volume Discount
Starting from∗ ： 1.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cushioning Cone Holder
YANASE
Since the holder part is a sponge, the contact is soft, and prevents excessive grinding.
[Features]
· Attachment when using a cushioning cone.
· Superb elasticity with the dedicated sponge.- Volume Discount
Starting from∗ ： 14.29 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Single-Action Top with Shaft
YANASE
[Features]
· This is the product you always wanted.
· The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
· Capable of heavy polishing with a soft touch.
· It is a retractable type, providing a large polishing area and beautiful finished surface.
· One-touch shaft attachment- Volume Discount
Starting from∗ ： 3.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Buff with Shaft Assorted Kit
YANASE
[Features]
· An assorted kit is available for first-time users and those who want to use it for various applications.- Volume Discount
Starting from∗ ： 104.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flexible Shaft 1
YANASE
[Features]
· Collet chuck type, for φ3/φ6.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.- Volume Discount
Starting from∗ ： 181.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flexible Shaft 2
YANASE
[Features]
· A drill chuck type that can be used with up to φ8.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.- Volume Discount
Starting from∗ ： 88.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flap Wheels with Shaft
YANASE
[Features]
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.- Volume Discount
Starting from∗ ： 7.47 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Felt Wheel with Shaft (Impregnated) Cylinder Type
YANASE
[Features]
· Can be used without applying polishing agent to the alumina oxide permeated felt buff.
· Apply abrasives to produce further gloss.- Volume Discount
Starting from∗ ： 12.29 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
NEO Flap Wheel, P Type
YANASE
[Features]
· The core has been made smaller to wield longer usable flap length.
· The 6‑mm shaft model features a stepped shaft.
· The papers are block types, giving springiness, a longer life and improved grinding performance.- Volume Discount
Starting from∗ ： 7.31 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Type |
| Material |
| Outer Diameter(mm) |
| Width(mm) |
| Shaft Diameter(mm) |
| Particle Size(#) |
| Stationary Diameter(mm) |
| Screw Hole Diameter(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE |
| Product Series | ||||||||||||||||||||||
| Starting from∗ | 4.09 € *Unit price with basic configuration Volume Discount | 9.84 € *Unit price with basic configuration Volume Discount | 14.95 € *Unit price with basic configuration Volume Discount | 15.36 € *Unit price with basic configuration Volume Discount | 11.80 € *Unit price with basic configuration Volume Discount | 6.41 € *Unit price with basic configuration Volume Discount | 16.76 € *Unit price with basic configuration Volume Discount | 7.36 € *Unit price with basic configuration Volume Discount | 7.55 € *Unit price with basic configuration Volume Discount | 21.30 € *Unit price with basic configuration Volume Discount | 12.62 € *Unit price with basic configuration Volume Discount | 11.92 € *Unit price with basic configuration Volume Discount | 18.38 € *Unit price with basic configuration Volume Discount | 1.60 € *Unit price with basic configuration Volume Discount | 14.29 € *Unit price with basic configuration Volume Discount | 3.42 € *Unit price with basic configuration Volume Discount | 104.20 € *Unit price with basic configuration Volume Discount | 181.38 € *Unit price with basic configuration Volume Discount | 88.36 € *Unit price with basic configuration Volume Discount | 7.47 € *Unit price with basic configuration Volume Discount | 12.29 € *Unit price with basic configuration Volume Discount | 7.31 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 8 Days | 5 Days | 5 Days | 5 Days | 8 Days | 6 Days | 5 Days | 5 Days | 6 Days | 5 Days | 5 Days | 9 Days |
| Application | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing |
| Type | - | Flap with shaft | Flap with shaft | Flap with shaft | - | Flap with shaft | - | Flap with shaft | - | - | - | - | - | Paper | Holder | Flap with shaft | Paper | - | - | Flap with shaft | Drum | Flap with shaft |
| Material | Felt | - | - | - | Buff | - | Flannel | - | Buff | Sisal | Felt | Felt | Cotton | - | - | - | - | - | - | - | Felt | - |
| Outer Diameter(mm) | 4 ～ 50 | 10 ～ 25 | 50 ～ 100 | 10 ～ 25 | 50 | 25 ～ 50 | 30 ～ 80 | 10 ～ 30 | 20 ～ 25 | 30 ～ 80 | 60 | 6 | 30 ～ 80 | - | Tip diameter ø14; Large end diameter φ20 | 10 ～ 25 | - | - | - | 10 ～ 125 | 10 | 20 |
| Width(mm) | 5 ～ 25 | 13 ～ 25 | 25 | 20 ～ 25 | 20 | 25 | 25 | 10 | 3 ～ 15 | 25 | 25 | 15 | 25 | - | 50 | 10 ～ 25 | - | - | - | 10 ～ 30 | - | 25 |
| Shaft Diameter(mm) | 3 ～ 6 | 3 ～ 6 | 6 | 3 ～ 6 | 6 | 6 | 6 | 3 | 3 | 6 | 6 | 3 | 6 | - | 6 | - | 6 | - | - | 3 ～ 6 | 3 | 6 |
| Particle Size(#) | - | 600 ～ 1500 | 120 ～ 600 | 60 ～ 100 | - | 60 ～ 240 | - | 80 ～ 180 | - | - | - | - | - | 80 ～ 150 | - | 60 ～ 240 | - | - | - | 40 ～ 600 | - | 60 |
| Stationary Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Hole Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ～ 6 | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Application
-
Type
- Flap with shaft
- Band
- Drum
- Paper
- Holder
- Holder (Drum)
-
Material
-
Outer Diameter(mm)
- 2.1
- 3
- 4
- 5
- 6
- ⌀6
- 6,8,10,12
- 6.1
- 7
- 8
- ⌀8
- 8–13
- 8.1
- 9
- 9.5
- 10
- ⌀10
- 11
- 12
- ⌀12
- 12.1
- 12.7
- 13
- ⌀13
- 14
- ⌀14
- Tip diameter ø14; Large end diameter φ20
- 15
- ⌀15
- 15.1
- 17
- ⌀17
- 19
- 19.1
- 20
- ⌀20
- 21
- ⌀21
- 22
- ⌀22
- 22.1
- 23
- 23.8
- 25
- ⌀25
- 25.1
- 25.4
- 28
- 30
- ⌀30
- 30.1
- 32
- 38
- 40
- ⌀40
- 45
- 50
- ⌀50
- 60
- 75
- 80
- 100
- 125
-
Width(mm)
-
Shaft Diameter(mm)
-
Particle Size(#)
-
Stationary Diameter(mm)
-
Screw Hole Diameter(mm)
Narrow search by specifying Brand
-
- MISUMI (9)
- ICHIGUCHI (37)
- NAKANISHI (34)
- TRUSCO NAKAYAMA (23)
- YANASE (22)
- MINITOR (9)
- KURODA BRUSH (6)
- NIHON SEIMITSU KIKAI KOSAKU (5)
- DREMEL (4)
- MURAKO (4)
- OFFICE MINE (3)
- SUMFLEX (3)
- SUN POWER(TAIYO SHOKAI) (2)
- UHT (2)
- H & H (1)
- NEWREGISTON (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.