- Important notice: Due to COVID-19 our costs for importing products to Europe have increased tremendously. Therefore, an additional freight cost surcharge of 11.50 Euros per delivery will be invoiced from May 1st, 2020 temporally. Find further information here.
Linear Bushings
Narrow search by specifying Type
?* Information on days to ship
-
- Recommendation
THK
Type with LMF type flange having flats at 4 locations. Can be used in compact designs since the core height is lower than with the round flange type.
- Volume Discount
- Stock
Starting from∗ ： 11.67 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Recommendation
BOSCH REXROTH
Low-cost linear bushing for general requirements. Small outer dimensions and highly compact construction. Reduced radial clearance for applications where minimal-clearance bearings with an H7 bore are desired. Initial lubrication with Dynalub 510.
- Volume Discount
Starting from∗ ： 11.45 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 4.78 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 2.90 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications.
Part of the milli series, the most widely used series in Japan.- Volume Discount
- Stock
Starting from∗ ： 13.07 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 10.33 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 5.07 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 8.90 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 6.60 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 12.53 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 8.23 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
THK
The outer cylinder of the standard-type linear bushing and the flange are integrated and fitting is easily achieved by bolting directly to the housing.
- Volume Discount
- Stock
Starting from∗ ： 21.77 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 5.07 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 12.44 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 14.35 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
THK
The outer cylinder of the standard-type linear bushing and the flange are integrated and mounting is easily achieved by bolting directly to the housing.
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads.- Volume Discount
Starting from∗ ： 74.47 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 9.76 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 1.58 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 2.97 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
THK
Type with LMF-L type flange having flats at 4 locations. Due to a lower core height, this type is more suitable for compact designs than the round flange type.
- Volume Discount
- Stock
Starting from∗ ： 29.08 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 7.37 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Min. Shipping Days ： 6 Days -
Starting from∗ ： 14.83 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications. It is part of the milli size series, which is in general use in Europe.
- Volume Discount
- Stock
Starting from∗ ： 15.25 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 6.89 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 12.44 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Linear Bushings with Pillow Blocks/Long/Wide Block
MISUMI
ATTENTION: From now on there are no dowel holes at position a for nominal size 50 ( dr50)! The catalog notation is being revised.
- Volume Discount
- Stock
Starting from∗ ： 18.08 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 2.54 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
![Linear Bushing Compact Type [KKBH]](//uk.misumi-ec.com/linked/material/mech/KBS1/PHOTO/221005197030.jpg?$product_view_b$)
Linear Bushing Compact Type [KKBH]
KBS
This compact type linear bushing contributes to reducing size of equipment. Abundant variation for small shaft sizes is offered. KBS , since its founding in 1995, has steadily built a domestic following in China. The linear bushings, the company's leading products, top the market in China.
- Volume Discount
- Stock
Starting from∗ ： 3.71 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 9.95 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 16.36 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 49.56 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
![Linear Bushing Housing Unit, Standard Type [SMYC]](//uk.misumi-ec.com/linked/material/mech/MYT1/PHOTO/221005199650_001.jpg?$product_view_b$)
Linear Bushing Housing Unit, Standard Type [SMYC]
MYT
Linear bushing with integrated housing unit. A standard type. Suitable for use in standard applications. MYT is a manufacturer of linear parts based in China. MYT products are manufactured under a strict quality management system and have been adopted all over the world.
- Volume Discount
- Stock
Starting from∗ ： 6.17 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
![Support Rail Block, Standard Type [SMYBR]](//uk.misumi-ec.com/linked/material/mech/MYT1/PHOTO/SBR.jpg?$product_view_b$)
Support Rail Block, Standard Type [SMYBR]
MYT
Made of aluminum alloy with support rail block anodized white. A box type unit that can be easily used as a linear bushing unit. MYT is a manufacturer of linear parts based in China. MYT products are manufactured under a strict quality management system and have been adopted all over the world.
- Volume Discount
- Stock
- CAD ：
- 3D
Starting from∗ ： 8.15 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 10.05 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
THK
The flange and outer cylinder are integrated and the flange is oval-shaped. This gives a lower core height, making this type more suitable for compact designs than the LMK type.
To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.- Volume Discount
- Stock
Starting from∗ ： 31.05 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
THK
Flange is oval-shaped. More suitable than the LMK-L type for compact designs due to lower core height.
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads.
To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.- Volume Discount
Starting from∗ ： 68.27 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 4.78 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
THK
Case unit has standard-type linear bushing embedded in small lightweight aluminum case. Can be mounted by simply bolting to table.
- Volume Discount
Starting from∗ ： 42.22 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
LM Stroke Bushing (Stroke/with Seal) ST-UU Type, ST-UUB Type
THK
Hardened shaft, recommended for use with outer diameter tolerance (k5, m5, n5 or p5).
[Features]
· [Extremely low friction coefficient] Enables rotation with extremely low friction coefficient (=0.0006 to 0.0012) due to point contacts between the balls and ball rolling surface, and the separation of the balls within the ball cage.
· [Compact-design] Since the cross-sectional profile is simply the combination of the thin-walled outer cylinder and the balls, the outer diameter of this bearing is small and it is suitable for lightweight and space-saving compact designs.
· [High accuracy and low price] The sliding parts can be manufactured at low cost and a high level of accuracy is obtained.- Volume Discount
- Stock
Starting from∗ ： 17.42 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 39.51 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
THK
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads and reduces assembly time.
- Volume Discount
- Stock
Starting from∗ ： 22.36 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 4.50 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Linear Bushing, European Size, LE Type
OZAK
[Features]
· LE: Standard type European size linear bearing
· ULE: Ultra long-life (U ultra) type with high tolerance of moment loads and ultra-long lifetime that is 18.5 times the lifetime of the standard type.- Volume Discount
Starting from∗ ： 26.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 2.68 € Min. Shipping Days ： Same day *Unit price with basic configuration
![Linear Bushing Compact Type [KKBH]](http://uk.misumi-ec.com/linked/material/mech/KBS1/PHOTO/221005197030.jpg?$product_view_b$)
![Linear Bushing Housing Unit, Standard Type [SMYC]](http://uk.misumi-ec.com/linked/material/mech/MYT1/PHOTO/221005199650_001.jpg?$product_view_b$)
![Support Rail Block, Standard Type [SMYBR]](http://uk.misumi-ec.com/linked/material/mech/MYT1/PHOTO/SBR.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Style |
| Flange Type |
| Diameter of Inscribed Circle dr(φ) |
| Overall Length L(mm) |
| Material of Outer Cylinder |
| Outer Cylinder Surface Treatment |
| Motion |
| Lubrication Type |
| The circulation type of balls |
| Outer Diameter D(φ) |
| Accuracy |
| Eccentricity(μm) |
| Type |
| Length |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||
| Brand | THK | BOSCH REXROTH | MISUMI | MISUMI | THK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | MISUMI | MISUMI | MISUMI | THK | MISUMI | MISUMI | MISUMI | THK | MISUMI | MISUMI | MISUMI | THK | MISUMI | MISUMI | MISUMI | MISUMI | KBS | MISUMI | MISUMI | MISUMI | MYT | MYT | MISUMI | THK | THK | MISUMI | THK | THK | MISUMI | THK | MISUMI | OZAK | MISUMI |
| Product Series | Shaft-sliding Linear Bushings with Pillow Blocks/Single/Double | LM Stroke Bushing (Stroke/with Seal) ST-UU Type, ST-UUB Type | Bushing Pillow Block with Clamp Levers/Wide Block Single Type | ||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Starting from∗ | 11.67 € *Unit price with basic configuration Volume Discount | 11.45 € *Unit price with basic configuration Volume Discount | 4.78 € *Unit price with basic configuration Volume Discount | 2.90 € *Unit price with basic configuration Volume Discount | 13.07 € *Unit price with basic configuration Volume Discount | 10.33 € *Unit price with basic configuration Volume Discount | 5.07 € *Unit price with basic configuration Volume Discount | 8.90 € *Unit price with basic configuration Volume Discount | 6.60 € *Unit price with basic configuration Volume Discount | 12.53 € *Unit price with basic configuration Volume Discount | 8.23 € *Unit price with basic configuration Volume Discount | 21.77 € *Unit price with basic configuration Volume Discount | 5.07 € *Unit price with basic configuration Volume Discount | 12.44 € *Unit price with basic configuration Volume Discount | 14.35 € *Unit price with basic configuration Volume Discount | 74.47 € *Unit price with basic configuration Volume Discount | 9.76 € *Unit price with basic configuration Volume Discount | 1.58 € *Unit price with basic configuration Volume Discount | 2.97 € *Unit price with basic configuration Volume Discount | 29.08 € *Unit price with basic configuration Volume Discount | 7.37 € *Unit price with basic configuration Volume Discount | - | 14.83 € *Unit price with basic configuration Volume Discount | 15.25 € *Unit price with basic configuration Volume Discount | 6.89 € *Unit price with basic configuration Volume Discount | 12.44 € *Unit price with basic configuration Volume Discount | 18.08 € *Unit price with basic configuration Volume Discount | 2.54 € *Unit price with basic configuration Volume Discount | 3.71 € *Unit price with basic configuration Volume Discount | 9.95 € *Unit price with basic configuration Volume Discount | 16.36 € *Unit price with basic configuration Volume Discount | 49.56 € *Unit price with basic configuration Volume Discount | 6.17 € *Unit price with basic configuration Volume Discount | 8.15 € *Unit price with basic configuration Volume Discount | 10.05 € *Unit price with basic configuration Volume Discount | 31.05 € *Unit price with basic configuration Volume Discount | 68.27 € *Unit price with basic configuration Volume Discount | 4.78 € *Unit price with basic configuration Volume Discount | 42.22 € *Unit price with basic configuration Volume Discount | 17.42 € *Unit price with basic configuration Volume Discount | 39.51 € *Unit price with basic configuration Volume Discount | 22.36 € *Unit price with basic configuration Volume Discount | 4.50 € *Unit price with basic configuration Volume Discount | 26.26 € *Unit price with basic configuration Volume Discount | 2.68 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | 3 Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 6 Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||
| Type | Flange | - | Flange | Straight | Straight | Flange | Straight | Housing | Flange | Flange | Flange | Flange | Straight | Flange | Housing | Flange | Housing | Straight | Straight | Flange | Flange | Related Components | Flange | Straight | Straight | Flange | Housing | Flange | Straight | Flange | Housing | Flange / Housing | Housing | Housing | Flange | Flange | Flange | Straight | - | Straight | Housing | Straight | Straight | Straight | Straight |
| Style | - | - | Standard | Standard | Standard / Open Type, Clearance Adjusting Type | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard | - | Standard | Standard | Standard | - | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Open Type, Clearance Adjusting Type | Standard | - | - | Standard | Standard | - | Standard | - | Standard | Standard | Standard |
| Flange Type | Standard Flange | - | Standard Flange | - | - | Standard Flange | - | - | Pilot Flange | Standard Flange / Center Flanged | Standard Flange | - | - | Pilot Flange | - | - | - | - | - | Standard Flange | Standard Flange | - | Pilot Flange | - | - | Pilot Flange | - | Standard Flange | - | Pilot Flange | - | Standard Flange | - | - | Center Flanged | Standard Flange | Standard Flange | - | - | - | - | - | - | - | - |
| Diameter of Inscribed Circle dr(φ) | 6 ～ 60 | - | 3 ～ 50 | 3 ～ 50 | 3 ～ 60 | 3 ～ 50 | 3 ～ 50 | 5 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 30 | 6 ～ 60 | 6 ～ 16 | 6 ～ 50 | 12 ～ 30 | 6 ～ 60 | 4 ～ 30 | 3 ～ 50 | 6 ～ 20 | 6 ～ 60 | 6 ～ 16 | - | 6 ～ 40 | 5 ～ 60 | 5 ～ 20 | 6 ～ 40 | 5 ～ 50 | 6 ～ 50 | 6 ～ 30 | 6 ～ 30 | 4 ～ 30 | 16 ～ 30 | 8 ～ 50 | 16 ～ 50 | 6 ～ 30 | 6 ～ 30 | 6 ～ 30 | 10 ～ 50 | 6 ～ 50 | 8 ～ 100 | 16 ～ 30 | 3 ～ 50 | 6 ～ 30 | 6 ～ 50 | 4 ～ 50 |
| Overall Length L(mm) | 17 ～ 110 | - | 10 ～ 100 | 10 ～ 100 | 10 ～ 110 | 19 ～ 192 | 19 ～ 192 | 18 ～ 110 | 19 ～ 100 | 35 ～ 192 | 29 ～ 90 | 17 ～ 110 | 19 ～ 70 | 35 ～ 192 | 40 ～ 138 | 35 ～ 211 | 15 ～ 74 | 10 ～ 100 | 16 ～ 35 | 35 ～ 211 | 19 ～ 37 | - | 49 ～ 230 | 22 ～ 125 | - | 49 ～ 230 | 33 ～ 215 | 19 ～ 100 | 22 ～ 50 | 29 ～ 90 | 27 ～ 138 | 37 ～ 123 | 30 ～ 110 | 45 ～ 110 | 29 ～ 90 | 19 ～ 64 | 35 ～ 123 | 39 ～ 220 | 25 ～ 110 | 24 ～ 100 | 59 ～ 158 | 19 ～ 192 | 29 ～ 90 | 19 ～ 100 | 23 ～ 192 |
| Material of Outer Cylinder | Iron | - | Iron / Stainless Steel | Iron / Stainless Steel | Iron | Iron / Stainless Steel | Iron / Stainless Steel | Iron / Stainless Steel | Iron / Stainless Steel | Iron / Stainless Steel | Iron | Iron | Iron | Iron / Stainless Steel | Iron | Iron | Iron / Stainless Steel | Iron | Iron / Stainless Steel | Iron | Iron | Iron / Aluminum | Iron / Stainless Steel | Iron | Iron / Stainless Steel | Iron / Stainless Steel | Iron / Stainless Steel | Iron | Iron | Iron | Iron / Stainless Steel | Iron | Aluminum | Aluminum | Iron | Iron | Iron | Iron | Iron / Stainless Steel | - | Iron | Iron / Stainless Steel | Iron | Iron | Iron |
| Outer Cylinder Surface Treatment | No Surface Treatment | - | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | No Surface Treatment | Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment / Surface Treatment | - | No Surface Treatment / Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | No Surface Treatment | Surface Treatment | No Surface Treatment | Surface Treatment | No Surface Treatment / Surface Treatment | Surface Treatment | Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | - | Surface Treatment | No Surface Treatment | No Surface Treatment / Surface Treatment | No Surface Treatment | No Surface Treatment |
| Motion | Linear Motion | - | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | - | Linear Motion | Linear Motion | Linear Motion/Rotary Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion/Rotary Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion |
| Lubrication Type | N/A | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | N/A | N/A | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Lubrication Impregnated block | N/A | - | N/A | N/A | N/A | N/A | N/A |
| The circulation type of balls | Single | - | Single | Single | Single | Double | Double | Single / Double | Single | Double | Double | Single | Single / Double | Double | Single / Double | Double | Single | Single | Single | Double | Single | - | Double | Single | - | Double | Double | Single | Single | Double | Double | Single / Double | Single | Single | Double | Single | Double | Single / Double | Single | - | Single / Double | Double | Double | Single | Double |
| Outer Diameter D(φ) | 12 ～ 90 | - | 7 ～ 80 | 7 ～ 80 | 7 ～ 90 | 7 ～ 80 | 7 ～ 80 | - | 12 ～ 80 | 12 ～ 80 | 12 ～ 45 | 12 ～ 90 | 10 ～ 26 | 12 ～ 80 | - | 12 ～ 90 | 8 ～ 45 | 7 ～ 80 | 12 ～ 32 | 12 ～ 90 | 10 ～ 26 | - | 15 ～ 65 | 12 ～ 90 | - | 15 ～ 65 | - | 12 ～ 80 | 12 ～ 40 | 12 ～ 45 | 8 ～ 45 | 28 ～ 45 | 17 ～ 61 | 22.5 ～ 60 | 12 ～ 45 | 12 ～ 45 | 12 ～ 45 | 19 ～ 80 | - | 15 ～ 130 | - | 7 ～ 80 | 12 ～ 45 | 12 ～ 75 | 8 ～ 80 |
| Accuracy | High Grade | - | High Grade | High Grade | High Grade / Precision Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | - | High Grade | High Grade | High Grade | - | High Grade | High Grade | - | High Grade | High Grade | High Grade | Standard Grade | High Grade | High Grade | High Grade | Standard Grade | Standard Grade | High Grade | High Grade | High Grade | High Grade | High Grade | - | High Grade | High Grade | High Grade | High Grade | - |
| Eccentricity(μm) | 12 ～ 25 | - | 8 ～ 20 | 8 ～ 20 | 4 ～ 25 | 10 ～ 25 | 10 ～ 25 | - | 12 ～ 20 | 15 ～ 25 | 15 ～ 20 | 12 ～ 25 | 12 ～ 15 | 15 ～ 25 | - | 15 ～ 25 | - | - | 12 ～ 15 | 15 ～ 25 | 12 | - | 20 ～ 30 | 12 ～ 20 | - | 20 ～ 30 | - | 24 ～ 40 | - | 15 ～ 20 | - | 12 ～ 20 | 12 ～ 20 | - | 15 ～ 20 | 12 ～ 15 | 15 ～ 20 | 12 ～ 25 | - | - | - | 10 ～ 25 | 15 ～ 20 | - | - |
| Type | Flanged End Face | - | Flanged End Face | Standard | Standard / Open Type / Clearance adjusting shape | Flanged End Face | Standard | Housing Units Wide Block Type | Flanged End Face | - | Flanged End Face | Flanged End Face | Standard | - | Shaft sliding type housing unit type | Flanged End Face | Housing Type | Standard | Standard | Flanged End Face | Flanged End Face | Related Components | - | Standard / Open Type | - | Flanged End Face | Housing Units Wide Block Type | Flanged End Face | Standard | - | Housing Type | Flanged End Face | Housing Type | Housing Type | - | Flanged End Face | Flanged End Face | Standard | Housing Units Wide Block Type | Standard | Housing Units Wide Block Type | Standard | Standard | Standard | Standard |
| Length | Standard | - | Standard | Standard | Standard | - | - | Standard / Medium | Standard | - | - | Standard | Standard | - | Standard / Double | Long | Standard | Standard | Short | Long | Standard | - | - | Standard | Standard / Double | - | Double / Medium Long / Long | Standard | Short | - | Double | Standard / Double | Standard | Standard | - | Standard | Long | Standard | Standard | - | Standard / Double | Long | - | Standard | Double |
![Linear Bushing Compact Type [KKBH]](http://uk.misumi-ec.com/linked/material/mech/KBS1/PHOTO/221005197030.jpg?$product_view_c$)
![Linear Bushing Housing Unit, Standard Type [SMYC]](http://uk.misumi-ec.com/linked/material/mech/MYT1/PHOTO/221005199650_001.jpg?$product_view_c$)
![Support Rail Block, Standard Type [SMYBR]](http://uk.misumi-ec.com/linked/material/mech/MYT1/PHOTO/SBR.jpg?$product_view_c$)
Loading...
Configure
Stock
-
- Show only stock items
Narrow search by specifying spec./dim.
-
Style
-
Flange Type
-
Diameter of Inscribed Circle dr(φ)
-
Overall Length L(mm)
- 10
- 12
- 13
- 15
- 16
- 17
- 18
- 19
- 20
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 88
- 90
- 91
- 92
- 93
- 94
- 96
- 97
- 98
- 99
- 100
- 102
- 103
- 104
- 105
- 106
- 108
- 109
- 110
- 111
- 112
- 114
- 115
- 118
- 120
- 121
- 122
- 123
- 124
- 125
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 138
- 140
- 141
- 143
- 144
- 145
- 148
- 150
- 151
- 153
- 154
- 155
- 156
- 157
- 158
- 160
- 165
- 167
- 170
- 175
- 176
- 177
- 178
- 180
- 182
- 184
- 185
- 187
- 190
- 192
- 193
- 199
- 200
- 202
- 209
- 211
- 215
- 220
- 224
- 230
- 240
- 243
- 244
- 250
- 300
-
Material of Outer Cylinder
-
Outer Cylinder Surface Treatment
-
Motion
-
Lubrication Type
-
The circulation type of balls
-
Outer Diameter D(φ)
-
Accuracy
-
Eccentricity(μm)
-
Type
-
Length
Narrow search by specifying Brand
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 1 Day or Less
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
Categories related to Linear Bushings
-
- Linear Shafts
- Shaft Supports
- Set Collars / Clamping Collars
- Linear Bushings
- Ball Guides
- Spline Shaft
- Oil Free Bushings, Washers
- Oil Free Plates, Guide Rails
- Linear Guides
- Cable Carriers
- Ball Screw
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators
- Other Linear Motion Related Components
- Bellows
-
Payment Method
Certificates
Copyright © MISUMI Corporation All Rights Reserved.
Please assist us in our effort to improve this site.
Please give us a feedback on the MISUMI e-Catalog.
Thank you for your cooperation.
If you wish to receive our response,please use the inquiry form.