Locating Units

?* Information on days to ship and prices

• 

  Auto-Latch

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.60 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Feed Fingers

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  	Special price
  Min. Shipping Days ：	Same day

• 

  Pneumatic separator with damping

  ASUTEC

  Separators with damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is in the middle or high range or when the transported workpieces are sensitive to shocks. Because of the damped stopping of the workpiece carrier, the entire conveyor system is prevented from damage and wear. Optionally, in many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	255.57 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Pneumatic separator without damping

  ASUTEC

  Separators without damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is low or when the transported workpieces are insensitive to shocks. Optionally, in many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	91.45 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks stainless steel, knob plastic (K1061)

  KIPP

  [Specifications]
  ・Main material: steel
  ・Surface finish body: nickel-plated
  ・Component material: plastic
  
  [Features]
  ・Locking element for connecting two separate plates
  ・Click signal when locked
  ・Form A mounting option: for plate thickness 6 or 12 mm
  ・Fastening screws included
  ・Main material: steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.38 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping plates recessed for quarter-turn clamp locks (K1062)

  KIPP

  [Specifications]
  ・Main material: stainless steel, steel
  ・Surface finish body: bright, nickel-plated
  ・D=diameter(mm): 5, 8
  
  [Features]
  ・Form B mounting option for plate thickness over 10mm
  ・Fastening screws included

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Thumb Turn Clamper (QCTH, QCTHL)

  IMAO CORPORATION

  Cam & spring type with lock / unlock state visible at a glance, high visibility with safety mechanism. Knob made of metal is used to reduce chance of damage.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.12 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pneumatic angle damper

  ASUTEC

  Angle dampers dampen workpiece carriers to a stop and are mainly used where workpiece carriers are changing direction at a cross-intersection. For example, when the workpiece carrier is changing its transport direction from a transverse section into a longitudinal section and vice versa. Angle dampers are commonly used in transfer systems were shock-sensitive products are transported.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	259.33 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Pneumatic return stop

  ASUTEC

  Return stops are used in low-friction transfer systems (eg with accumulation roller chain). They prevent rebounding of the workpiece carrier from the separator in the stopping process. Rebounding the workpiece carriers leads to complications in the control of the workpiece carriers since the workpiece carrier is temporarily not at the presumed position. In addition, rebounding has a negative effect on the cycle time, and the components of the transfer system are more strongly loaded by the multiple impact of the workpiece carrier on the separator. Retrun stops may not be used to stop the workpiece carriers in the conveying direction. During transport ot the workpiece carrier in regular transport direction, the pawl of the return stop is pressed down by the workpiece carrier when moving over it.Retrun stops are also available, which can be lowered pneumatically or electrically for the reversing operation of the conveyor.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pneumatic positioning unit

  ASUTEC

  Positioning units are used to precisely position the workpiece carrier after stopping. When the positioning cylinder is extended, the workpiece carrier is centered with suitable locating pins and thus exactly positioned. Typically, the workpiece carrier is lifted by the positioning slightly from the conveyor belt and above pressed against a fixed stop. Thus, the workpiece carrier no longer rests on the conveyor belt and processes on the work piece can occur without vibration. The positioning units are supplied without accessories and have a receiving bore for the insertion of suitable locating pin. In many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	207.97 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Positioning cones, Steel, for centring units (K1627)

  KIPP

  · Extremely high repeat accuracy of <0.003 mm
  
  · No tilting when joining
  
  · Not sensitive to dirt and splinters
  
  · Easy handling

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	47.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quick Shaft Clamp (QSC)

  IMAO CORPORATION

  Lever operation pushes the internal push bar, and shaft is clamped. Unclamp operates when returning lever with plate spring acting on push bar.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.18 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pneumatic separator for roller conveyor system with damping

  ASUTEC

  The separator from ASUTEC for roller conveyor systems have the advantage that they can be usedfor direct integration into roller conveyors because of the specially developed slim design. These separators stop one or more accumulated workpiece carriers on the defined workpiece carrier stop plate in roller conveyor systems. Especially useful are the separator for tight installation spaces between the rollers. The concept developed by Asutec with extreme stability and high resistance to contamination makes these separators universally applicable. For all ASUTEC separators for roller conveyor systems, it is possible to query the upper and the lowered position with inductive proximity switches.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	766.70 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Clamping plates steel for quarter-turn clamp locks (K1560)

  KIPP

  · Fastening screws included
  
  · Mounting option for plate thickness starting from 9 mm
  
  · Accessory for quarter-turn clamp lock K1559

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Push button latches stainless steel, Form B, without head (K1562)

  KIPP

  [Specifications]
  ・Main material: stainless steel
  ・Surface finish body: bright
  ・Component material: stainless steel
  
  [Features]
  ・For connecting machine parts and workpieces quickly and easily
  ・Mounting option for plate thickness 3 to 27mm
  ・Secure locking by simply pressing and releasing the push button
  ・Ideal for places where space is limited
  ・Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  ・Version 1: without head

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.59 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Feed Fingers / Economy

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.19 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks stainless steel, knob stainless steel (K1061)

  KIPP

  [Specifications]
  ・Main material: stainless steel
  ・Component material: stainless steel
  ・D=diameter(mm): 5, 8
  
  [Features]
  ・Locking element for connecting two separate plates
  ・Click signal when locked
  ・Form A mounting option: for plate thickness 6 or 12 mm
  ・Fastening screws included

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp lock steel, rotary knob plastic (K1558)

  KIPP

  · Locking element for connecting two separate plates
  
  · With retractable shank, ideal for places where space is limited
  
  · Click signal when locked
  
  · Mounting option for plate thickness 6 to 14 mm
  
  · Fastening screws included

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	34.91 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Electrical separator with damping

  ASUTEC

  Separators with damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is in the middle or high range or when the transported workpieces are sensitive to shocks. Because of the damped stopping of the workpiece carrier, the entire conveyor system is prevented from damage and wear. The electrically controlled separators from ASUTEC are available in many different versions. On the one hand, with a motorized drive and integrated evaluation electronics or, on the other hand, with an electrically controlled single-stroke control magnet. The damping is effected by a hydraulic damping unit or by an adjustable air damping system.Benefits of the electrical separators:Elimination of pneumaticEco-Friendly production by abolition of the extract airMinimal energy consumptionIncreased energy efficiencyEasy and very quick installationHigh time and cost savings

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,166.29 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  Quarter-turn latches steel rotary knob, plastic (K1561)

  KIPP

  · Locking element for connecting two separate plates
  
  · Click signal when locked
  
  · Ideal where space is restricted:
  
  · Mounting option for plate thickness 6 to 14 mm
  
  · Fastening screws included

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.67 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cable glands, stainless steel or plastic in Hygienic DESIGN (80800, 84100)

  NORELEM

  · Protection class IP 68
  
  · Corrosion-resistant
  
  · EHEDG-certified screw connection system
  
  · High vibration resistance.
  
  · Optimal strain relief

  Select to compare

  Configure now
  Starting from∗ ：	11.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Angle plates, grey cast iron, wide with T-slots (K1531)

  KIPP

  · Base element for system construction
  
  · Precision-machined support and clamping faces
  
  · Clamping tools mounted in T-slots

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,305.25 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping plates surface mounted for quarter-turn clamp locks (K1062)

  KIPP

  · Form A mounting option: for plate thickness 6 to 10 mm
  
  · Metric fine thread
  
  · Fastening screws included

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locating cylinder with quick clamping system (K0935)

  KIPP

  [Specifications]
  ・Main material: high carbon steel
  ・Component material: ball-bearing steel
  ・D=pin diameter(mm): 13, 16,10
  
  [Features]
  ・Fast opening and closing
  ・Mechanical positioning and clamping system
  ・Various sizes
  ・High retaining forces
  ・For different thicknesses of clamping plate

  Select to compare

  Configure now
  Starting from∗ ：	107.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Work Detection Units

  MISUMI

  [Features] It can be used in places that cannot be directly detected by proximity sensors.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Stainless Steel-Tension levers

  GANTER

  Stainless Steel-Tension levers GN 212 are used as clamping element as well as operating levers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.32 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Push button latches stainless steel, Form A, with head (K1562)

  KIPP

  [Specifications]
  ・Main material: stainless steel
  ・Surface finish body: bright
  ・Component material: stainless steel
  
  [Features]
  ・For connecting machine parts and workpieces quickly and easily
  ・Mounting option for plate thickness 3 to 27mm
  ・Secure locking by simply pressing and releasing the push button
  ・Ideal for places where space is limited
  ・Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  ・Version 1: with head

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks stainless steel, knob plastic (K1559)

  KIPP

  · High clamping forces up to 400 N
  
  · Ideal where space is restricted:
  
  · Click signal when locked
  
  · Fastening screws included
  
  · Mounting option for plate thickness 6 to 20 mm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	62.49 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks stainless steel, knob stainless steel (K1559)

  KIPP

  · High clamping forces up to 400 N
  
  · Ideal where space is restricted:
  
  · Click signal when locked
  
  · Fastening screws included
  
  · Mounting option for plate thickness 6 to 20 mm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	71.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locating cylinder Ball Lock (K0935)

  KIPP

  · Mechanical positioning and clamping system
  
  · Various sizes
  
  · High retaining forces
  
  · For different thicknesses of clamping plate

  Select to compare

  Configure now
  Starting from∗ ：	101.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter turn latches, with knurled head (K1730)

  KIPP

  · Small lock with high tensile strength
  
  · Opened or closed with a quarter turn
  
  · Vibration-resistant and tolerance-compensating
  
  · Loss-proof (according to mechanical engineering directive)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.65 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter turn latches, with star grip (K1730)

  KIPP

  · Small lock with high tensile strength
  
  · Opened or closed with a quarter turn
  
  · Vibration-resistant and tolerance-compensating
  
  · Loss-proof (according to mechanical engineering directive)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.65 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks, flat stainless steel (K1061)

  KIPP

  [Specifications]
  ・Main material: steel
  ・Surface finish body: nickel-plated
  ・Component material: stainless steel
  
  [Features]
  ・Locking element for connecting two separate plates
  ・Ideal for restricted spaces
  ・Click signal when locked
  ・Form A mounting option: for plate thickness 6 or 12mm
  ・Fastening screws included

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.56 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Lock bottom parts for quarter turn latches (05592-52)

  NORELEM

  · Quick assembly
  
  · Vibration-resistant and tolerance-compensating
  
  · Suitable for all locking pins

  Select to compare

  Configure now
  Starting from∗ ：	1.73 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping plates recessed for quarter-turn clamp locks (05592)

  NORELEM

  · Form B mounting option for plate thickness over 10 mm
  
  · Fastening screws included

  Select to compare

  Configure now
  Starting from∗ ：	18.30 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locating sleeve (K0814)

  KIPP

  · Precision diameters ground and hardened
  
  · Matched to KIPP basic elements

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Latch (08150)

  NORELEM

  · Modular system for drilling jigs
  
  · Locking system for drilling plates

  Select to compare

  Configure now
  Starting from∗ ：	66.79 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locating feet (K0303)

  KIPP

  · Simple assembly
  
  · High stability
  
  · Hardened and black oxidised

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp lock steel, rotary knob stainless steel (K1558)

  KIPP

  · Locking element for connecting two separate plates
  
  · With retractable shank, ideal for places where space is limited
  
  · Click signal when locked
  
  · Mounting option for plate thickness 6 to 14 mm
  
  · Fastening screws included

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	62.49 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping plates surface mounted for quarter-turn clamp locks (05592)

  NORELEM

  · Form A mounting option: for plate thickness 6 to 10 mm
  
  · Metric fine thread
  
  · Fastening screws included

  Select to compare

  Configure now
  Starting from∗ ：	18.30 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks flat (05591)

  NORELEM

  · Locking element for connecting two separate plates
  
  · Ideal for restricted spaces
  
  · Click signal when locked
  
  · Form A mounting option: for plate thickness 6 or 12 mm
  
  · Fastening screws included

  Select to compare

  Configure now
  Starting from∗ ：	52.59 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Positioning units (K0918)

  KIPP

  · Ground receiving hole
  
  · Manual actuation

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	296.09 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Linear Stop Motion (LSM)

  IMAO CORPORATION

  Using lever operation linear rail is directly clamped. As clamp is with internal screw, clamping is always regular. Can operate even in narrow gap.
  
  [Features]
  · Easy operation and secure locking.
  · As clamps with internal spring, clamping is always regular.
  · As swivel space for clamping lever is not required, can operate even in small gap as shown in the diagram below.
  · Lever direction can be changed by 90° pitch

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	178.78 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Shaft Clamp (Air Operation) (QSCA)

  IMAO CORPORATION

  Clamp with spring pressure, and unclamping with air pressure, so no worry of lowered clamping force due to air leaks etc. Multiple simultaneous controls possible.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	118.07 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Locating cylinder stainless steel, pneumatic (K1738)

  KIPP

  [Specifications]
  ・Main material: stainless steel
  ・Component material: nitrile rubber
  ・D=diameter(mm): 19
  
  [Features]
  ・Suitable for automation processes
  ・Pneumatic actuation
  ・Compact design
  ・Rust-free

  Select to compare

  Configure now
  Starting from∗ ：	104.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...