Transmissions, Reducers

• 

  • Volume Discount

  ABP ANTRIEBSTECHNIK

  Bevel Gearbox

  High-quality bevel gears with minimised gear backlash for small and medium power ranges, plain bearings of sintered bronze

  Read more

  CAD:

  3D

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	-	-	-	-	-

  Regular price (excluding VAT):

  72.72 €～

  Standard shipping days:

  5 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Worm Gear Units KES 30

  Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.Center distance 30 mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass.Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication.Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: approx. 1,000 hours at max. performance at speed 500 min-1 and operating time 20%, at +20°C.Permissable operating temperature: -20° to +60°C.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Worm Gear	-	-	-	-

  Regular price (excluding VAT):

  266.58 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount
  • Stock

  KYOUIKU GEAR MFG（KG）

  KG Gearbox, B-BOX

  High-precision and compact bevel gearbox. Choose from speed ratios 1: 1 and 1: 2. Abundant lineup of shaft diameters available, from ø3 to ø25. The full surface is the reference surface, and there are no restrictions on the mounting direction.Can be mounted quickly thanks to its screw hole machining, already completed. Lubricated with grease and maintenance-free.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  No Leg	Bevel gear	1 ～ 2	3 ～ 25	N/A	Solid / Hollow

  Regular price (excluding VAT):

  116.54 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  • Volume Discount
  • Stock

  KYOUIKU GEAR MFG（KG）

  KG Gearbox, B-SET

  Economy type compact bevel gear set. Shaft diameter ø4~. Choose from speed ratios 1: 1 and 1: 2. Both sides are mounting reference surfaces, and drilled hole machining has been applied to the body to facilitate quick mounting.Drilled holes can also be used as pilot holes. Plastic cover included.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  No Leg	Bevel gear	1 ～ 2	4 ～ 12	N/A	Solid

  Regular price (excluding VAT):

  83.50 €～

  Standard shipping days:

  Stock item: 1 working day

  Some items can be shipped the same day

  Configure now
• 

  NORELEM

  Worm drives (22700)

  · Smooth and quiet power transmission· Simple screw fastening· 7 ratios from 13:1 to 65:1· Housing sealed to prevent grease leakage and keep dust out· Direction of rotation on the shaft is arbitrary

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Worm Gear	-	-	-	-

  Regular price (excluding VAT):

  243.29 €

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAKISHINKO

  S Series, W Type

  Standard worm reducer with superior results and abundant valuations

  Read more

  CAD:

  2D

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  With Leg	Worm Gear	10 ～ 60	17 ～ 32	N/A	Solid

  Regular price (excluding VAT):

  277.77 €～

  Standard shipping days:

  21 working days

  Configure now
• 

  • Volume Discount

  MAKISHINKO

  TB Type Spiral Bevel Gearbox

  Small bevel gearbox that is lightweight, low noise, and high efficiency with free mounting direction

  Read more

  CAD:

  2D

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  With Leg	Bevel gear	1 ～ 2	11 ～ 19	N/A	Solid

  Regular price (excluding VAT):

  197.90 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  MAKISHINKO

  MAL Series High-Efficiency Worm Reduction Gear

  [Features]· Lightweight Aluminum die-cast product body provides a 45% weight reduction in comparison to previous cast-iron models, with improved strength and performance.　· Compact and high-capacity Approximately 200% increase in product case surface area significantly improves rated heat capacity (compared to previous models)· Extensive lineupExtensive lineup caters to any need, with hollow output, solid output, dual input shaft, motors included, etc.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  No Leg	Worm Gear	30 ～ 60	25 ～ 30	N/A	Solid

  Regular price (excluding VAT):

  379.05 €～

  Standard shipping days:

  20 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Bevel Gearboxes KEK Version A

  Angular drives with high torques at very low dimensions.Suitable in a wide variety of applications 8 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened.Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication.Angular backlash: 3°+/-1°.Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%.Permissable operating temperature: -20° to +60°C.* Not according to DIN 6885.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Bevel gear	-	-	-	-

  Regular price (excluding VAT):

  122.15 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • DISCOUNTED
  • Volume Discount

  KYOUIKU GEAR MFG（KG）

  KG Gearbox, W-BOX

  High-precision and compact worm gearbox. Shaft diameter ø5~. Choose from an abundant selection of reduction ratios, from 1: 10 to 1: 50. The full surface is the reference surface, and there are no restrictions on the mounting direction.Can be mounted quickly thanks to its screw hole machining, already completed. Lubricated with lubricating oil.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  No Leg	Worm Gear	10 ～ 50	5 ～ 8	N/A	Solid

  Regular price (excluding VAT):

  216.18 €～

  Regular price (excluding VAT):

  Special price

  Standard shipping days:

  Stock item: 1 working day

  Some items can be shipped the same day

  Configure now
• 

  • Volume Discount
  • Stock

  KOHARA GEAR INDUSTRY

  Bevel Box L Type KBX

  High-efficiency aluminum die cast compact L type bevel BOX that uses carburized spiral bevel gears to reduce noise. Lubricated with high-grade grease. Maintenance-free.

  Read more

  CAD:

  2D

  /3D

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  Flange	Bevel gear	1 ～ 2	10 ～ 20	N/A	Solid

  Regular price (excluding VAT):

  152.07 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Miniature Bevel Gearboxes MKU Model H

  Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l1 and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Model H: Straight-through output hollow shaft, slowly turning.Permiss. Ambient temperature -10°C to +90°C.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Bevel gear	-	-	-	-

  Regular price (excluding VAT):

  334.06 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAKISHINKO

  SB Type Spiral Bevel Gearbox

  Silent, powerful and robust bevel gearbox with abundant selectable shaft arrangements that can be used for a wide range of applications

  Read more

  CAD:

  2D

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  With Leg	Bevel gear	1 ～ 2	19 ～ 50	N/A	Solid

  Regular price (excluding VAT):

  530.85 €～

  Standard shipping days:

  14 working days

  Configure now
• 

  • Volume Discount

  KYOUIKU GEAR MFG（KG）

  KG Gearbox, HY-BOX

  High-precision and compact hypoid gearbox. Shaft diameter ø6~. Choose from speed ratios 1: 5 and 1: 10. The full surface is the reference surface, and there are no restrictions on the mounting direction.Can be mounted quickly thanks to its drilled hole machining, already completed. Lubricated with grease and maintenance-free.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  No Leg	Other	5 ～ 10	6 ～ 12	N/A	Solid

  Regular price (excluding VAT):

  341.02 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  • Volume Discount

  MAKISHINKO

  FB Type Straight Bevel Gearbox

  Small and lightweight bevel gearbox with sturdy design optimal for agricultural machinery and industrial machinery

  Read more

  CAD:

  2D

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  No Leg	Bevel gear	1 ～ 2	19 ～ 38	N/A	Solid

  Regular price (excluding VAT):

  363.17 €～

  Standard shipping days:

  14 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Miniature Bevel Gearboxes MKU Model K

  Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l1 and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Model K: Input side C: Transmission ratio for gearing down.Permiss. Ambient temperature -10°C to +90°C.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Bevel gear	-	-	-	-

  Regular price (excluding VAT):

  316.14 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Stock

  KOHARA GEAR INDUSTRY

  Bevel Box T Type KBX

  [Features]· High-efficiency aluminum die cast compact T type bevel BOX that uses carburized spiral bevel gears to reduce noise.· Lubricated with high-grade grease. Maintenance-free.

  Read more

  CAD:

  2D

  /3D

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  Flange	Bevel gear	1 ～ 2	10 ～ 20	N/A	Solid

  Regular price (excluding VAT):

  164.00 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Miniature Bevel Gearboxes MKU Model L

  Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l1 and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Model L: Straight-through output shaft, slowly turning.Permiss. Ambient temperature -10°C to +90°C.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Bevel gear	-	-	-	-

  Regular price (excluding VAT):

  316.14 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Bevel Gearboxes HUG, Ratio 1:1

  General: Miniaturised right-angle drives for light duty.Suitable for manual and short term drive applications.Housing: Gear cases are injection moulded in filled polyamide 6.6 for low moisture take up, low thermal expansion, high rigidity.Electrical insulating. Shafts hardened and ground.Gearing: straight teeth, max. backlash 2º. Speed max. 1,000min-1.Version A: with steel bevel gears, bonded onto the shafts.Version B: with polyacetal bevel gears, moulded onto the shafts.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Bevel gear	-	-	-	-

  Regular price (excluding VAT):

  49.77 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Bevel Gearboxes KEK Version B

  Angular drives with high torques at very low dimensions.Suitable in a wide variety of applications 8 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened.Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication.Angular backlash: 3°+/-1°.Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%.Permissable operating temperature: -20° to +60°C.* Not according to DIN 6885.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Bevel gear	-	-	-	-

  Regular price (excluding VAT):

  168.91 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Angular Drive OW2, Ratio 1:1, with Polyacetal Bevel Gears

  Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyacetal: Standard quality with high hardness.Shaft angle = 90º. Temperature range - 20°C to +100º C.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	-	-	-	-	-

  Regular price (excluding VAT):

  32.82 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Angular Drive OW3, Ratio 1:1, Version 30 R

  Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1, 3 versions, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Shaft angle = 90º. Number of teeth = 16/16.Temperature range - 20°C to +100º C.Version 30 R: Two shafts with two bevel gears.On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it's sense of rotation can be chosen freely.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	-	-	-	-	-

  Regular price (excluding VAT):

  45.56 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Worm Gear Units KES 15

  Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.Center distance 15 mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass.Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication.Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: approx. 1,000 hours at max. performance at speed 500 min-1 and operating time 20%, at +20ºC.Permissable operating temperature: -20° to +60°C.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Worm Gear	-	-	-	-

  Regular price (excluding VAT):

  196.91 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  KOHARA GEAR INDUSTRY

  Bevel Box T Type CBX

  Tough bevel box with high-grade cast iron case and tapered roller bearings. With the high-efficiency L type bevel box that uses carburized spiral bevel gears to reduce noise, 8 paths can be chosen by positioning the shaft. Lubricated with high-grade lubricant.

  Read more

  CAD:

  2D

  /3D

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  Flange With Leg	Bevel gear	2	32 ～ 40	N/A	Solid

  Regular price (excluding VAT):

  1,458.81 €～

  Standard shipping days:

  19 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Bevel Gearboxes DZA, Version A

  General data: 4 sizes.Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Ratio for gearing up to max. 750 min-1 possible.Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permissable operating temperature: -18ºC to +80ºC.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Bevel gear	-	8 ～ 25	-	-

  Regular price (excluding VAT):

  174.53 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Bevel Gearboxes DZA, Version B

  General data: 4 sizes.Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Ratio for gearing up to max. 750 min-1 possible.Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permissable operating temperature: -18ºC to +80ºC.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Bevel gear	-	8 ～ 25	-	-

  Regular price (excluding VAT):

  180.35 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Bevel Gearboxes DZA Model H, Size 3

  General data: Gearbox with hollow shaft on the output side.Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible.The maximum input speed (hollow shaft as input device) for gearing up is 750 min-1 at 2 : 1 and 500 min-1 at 3 : 1.Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permissable operating temperature: -18ºC to +80ºC.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Bevel gear	-	19	-	-

  Regular price (excluding VAT):

  656.24 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Worm Gear Units KES 20

  Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.Center distance 20 mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass.Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication.Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: approx. 1,000 hours at max. performance at speed 500 min-1 and operating time 20%, at +20ºC.Permissable operating temperature: -20° to +60°C.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Worm Gear	-	-	-	-

  Regular price (excluding VAT):

  210.95 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  NORELEM

  Worm drive compact (22700-12)

  · Maintenance-free· Housing die-cast zinc.· Hardened steel worm screw and worm wheel· 5 different ratios· Centre distance 14 mm

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Worm Gear	-	-	-	-

  Regular price (excluding VAT):

  104.81 €

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAKISHINKO

  S Series, K Type

  Standard worm reducer with superior results and abundant valuations

  Read more

  CAD:

  2D

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  With Leg	Worm Gear	10 ～ 60	17 ～ 55	N/A	Solid

  Regular price (excluding VAT):

  293.46 €～

  Standard shipping days:

  21 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Bevel Gearboxes DZA Model H, Size 2

  General data: Gearbox with hollow shaft on the output side.Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible.The maximum input speed (hollow shaft as input device) for gearing up is 750 min-1 at 2 : 1 and 500 min-1 at 3 : 1.Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permissable operating temperature: -18ºC to +80ºC.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Bevel gear	-	14	-	-

  Regular price (excluding VAT):

  454.84 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Angular Drive OW2, Ratio 1:1, with Polyketone Bevel Gears

  Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking.Shaft angle = 90º. Temperature range - 20°C to +100º C.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	-	-	-	-	-

  Regular price (excluding VAT):

  42.38 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Angular Drive OW3, Ratio 1:1, Version 20

  Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1, 3 versions, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Shaft angle = 90º. Number of teeth = 16/16.Temperature range - 20°C to +100º C.Version 20: Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it's sense of rotation be chosen freely.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	-	-	-	-	-

  Regular price (excluding VAT):

  45.56 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAKISHINKO

  S Series, B Type

  Standard worm reducer with superior results and abundant valuations

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  With Leg	Worm Gear	10 ～ 60	17 ～ 32	N/A	Solid

  Regular price (excluding VAT):

  277.77 €～

  Standard shipping days:

  20 working days

  Configure now
• 

  KOHARA GEAR INDUSTRY

  Bevel Box L Type CBX

  Tough bevel box with high-grade cast iron case and tapered roller bearings. With the high-efficiency L type bevel box that uses carburized spiral bevel gears to reduce noise, 16 paths can be chosen by positioning the shaft. Lubricated with high-grade lubricant.

  Read more

  CAD:

  2D

  /3D

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  Flange With Leg	Bevel gear	1 ～ 2	18 ～ 40	N/A	Solid

  Regular price (excluding VAT):

  723.55 €～

  Standard shipping days:

  19 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Bevel Gearboxes DZR, Stainless Steel, Version A

  General data: High resistance to corrosion.4 sizes.Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Ratio for gearing up to max. 750 min-1 possible.Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permissable operating temperature: -18ºC to +80ºC.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Bevel gear	-	8 ～ 25	-	-

  Regular price (excluding VAT):

  627.37 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Bevel Gearboxes DZR, Stainless Steel, Version B

  General data: High resistance to corrosion.4 sizes.Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Ratio for gearing up to max. 750 min-1 possible.Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permissable operating temperature: -18ºC to +80ºC.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Bevel gear	-	8 ～ 25	-	-

  Regular price (excluding VAT):

  667.48 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  • Volume Discount

  MAEDLER

  Angular Drive OW3, Ratio 1:1, Version 30 L

  Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1, 3 versions, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Shaft angle = 90º. Number of teeth = 16/16.Temperature range - 20°C to +100º C.Version 30 L: Two shafts with two bevel gears.On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it's sense of rotation can be chosen freely.

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	-	-	-	-	-

  Regular price (excluding VAT):

  45.56 €～

  Standard shipping days:

  4 working days

  Configure now
• 

  NORELEM

  Worm drives (22700-10)

  · Maintenance-free· Housing die-cast zinc.· Hardened steel worm screw and worm wheel· 4 different ratios· Centre distance 25 mm

  Read more

  Mounting Division	Type	Reduction Ratio	Shaft Diameter(φ)	The presence or absence of motor	Output shaft type
  -	Worm Gear	-	-	-	-

  Regular price (excluding VAT):

  116.17 €～

  Standard shipping days:

  4 working days

  Configure now