Keyless Bushing (Fastening Fittings)

?* Information on days to ship and prices

• • Recommendation

  

  Tapered Clamping Bush 1008 with Inch Drill

  CONCAR

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• • Recommendation

  

  Tapered Clamping Bush 1008 with Metric Drill

  CONCAR

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  Keyless Bushings / Standard

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	35.76 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Compact and self-centering locking device KBS61

  KBK

  · Large clamping range
  · High centering capability and good concentricity properties
  · Compact design
  · Available starting from 5mm shaft diameter
  · Torque range: 6 - 1900Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.12 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushings / Easy Mounting (Nut)

  MISUMI

  [Features] It can be easily installed by simply tightening 1 nut.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.66 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Self-centering locking device for small hubs KBS80

  KBK

  · For high concentricity and perpendicularity of the components
  · No axial displacement during assembly
  · Self-centering
  · Torque range: 12 – 17500Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.79 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  POSI LOCK G

  MIKI PULLEY

  Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Can support heavy loads.
  
  [Features]
  · Tightening the clamping bolt moves the 2 taper rings in the shaft direction.
  · At this time, the wedging action between both the inner ring and the outer ring against the taper surface produces force that pushes against the shaft and hub internal surface. This force completely connects the axis and shaft.
  · The PSL-G has an even transmission ability due to its simple construction and strong components, and it can also cope with heavy loads.
  · Short in shaft direction, does not take up more space than necessary.
  · PSL-G-C (simple rust-proofing specification) is a simple rust proofing specification that involves applying electroless nickel plating to the main body.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	54.73 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushings / Straight

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	35.14 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushings / Straight for High Torque

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	105.79 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Self-centering locking device KBS13

  KBK

  · For connections in the smallest places
  · Very short design
  · Self-centering
  · Torque range: 310 - 46980Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.67 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushings / Compact

  MISUMI

  [Features] It has a centring function and is suitable for a smaller hub.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.74 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushings / Thin

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.46 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Locking Elements 8006

  RINGFEDER

  Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Device

  KBK

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.02 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Mecha-Lock MN Series, Nut Type

  ISEL

  Easy-to-tighten nut type key-less bushing (fastening fitting).
  [Features]
  · Tightening the nut shortens the tightening time.
  · Easiest assembly among mechanical lock series.
  · Centering can be done by simply tightening both the sides.
  · Also contributes to reduction of hub outer diameter.
  [Applications]
  · Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
  · Ideal for installations with thinner hub thickness and low torque.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.53 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Locking Element

  KBK

  · Very cost-effective
  · For medium and low torques
  · Requests a mounting flange provided by the customer
  · Compact installation dimensions
  · Non self-centering
  · Torque range: 2,4 - 31500Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.74 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-AK Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.96 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mecha Lock MA, Standard Type

  ISEL

  [Features]
  · 34 models that have shaft diameters standardized from ø5 to ø85.
  · Centering function suppresses outer circumference and terminal surface run-out.
  · Loose design of slope angle degrees produces a self-locking effect.
  · Hub internal diameter can be used with pass-through machining.
  · Wide range of hub options with thin walls and low surface pressure

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.74 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  OPTIBELT Taper Bushing with Metric Bore

  OPTIBELT

  Select to compare

  Configure now
  Starting from∗ ：	4.78 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rigid Shaft Coupling

  KBK

  · Very cost-effective
  · For medium and low torques
  · No axial displacement during assembly
  · Self-centering
  · Torque range: 158 - 4300Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.64 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-A Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Short locking device for higher tolerances KBS40

  KBK

  · Costs-effective
  · Very short
  · Large span
  · Non self-centering
  · Torque range: 255 - 68000Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1610 with Metric Drill

  CONCAR

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Mega Lock, MC, Standard Type (Aluminum Specifications)

  ISEL

  · 22 models from φ4 to φ35 shaft diameter available as standard
  · Supports aluminum timing pulleys (steel is also usable)
  · Reduced number of bolts shortens attachment/detachment time
  · With a spigot joint on the back, it can also be used as a bearing retainer
  · With low surface pressure, it is also ideal for hollow shafts

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.33 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Locking Assemblies Stainless Steel 7061 SST

  RINGFEDER

  Self-centering 2-piece Locking Assemblies for medium torques. During mounting, minor axial displacement of the hub occurs in opposite direction of the screw head. Due to the small number of screws, cost savings during mounting are ensured. For disassembly only few release screws are required. High-strength clamping screws allow a higher performance range.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Keyless Bushing (Fastening Fittings)

  OPTIBELT

  Select to compare

  Configure now
  Min. Shipping Days ：	4 Days

• 

  Locking Assemblies 7005

  RINGFEDER

  Clamping set for high loads and suitable for alternating moments. Ideal for use in belt drums and flywheels.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies 7015.1

  RINGFEDER

  Locking Assembly for transmission of torques, axial forces and high bending moments at reduced contact pressures, with special requirements to the true running of the clamped pieces. Special features With the long and flat angle of the cones, the required loads can be transferred with one Locking Assembly RfN 7015.1. During mounting Locking Assembly, shaft and hub remain to each other in position. Compared to three-part construction types, thus an additional safety is provided. Shaft and hub are only compression loaded.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies 7080

  RINGFEDER

  Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity. The clamping set is additionally nickel-plated.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Keyless Bushing A.P.LOCK SAPL-AS Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	67.20 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPA Series

  SUNGIL

  [Features]
  · Made from aluminum.
  Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
  · High torque transmission power
  Uses high rigidity aluminum alloy to transmit torque, so it can be used not only with aluminum pulleys but also general steel pulleys.
  · Optimal for clean rooms
  Electroless nickel plating bolts are used standard for the aluminum main body materials, making it optimal for clean rooms.

  Select to compare

  Configure now
  Starting from∗ ：	20.88 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPC Series

  SUNGIL

  [Features]
  · Made from aluminum.
  Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
  · Optimal for aluminum pulleys.
  When running a servo motor with a timing pulley, conventional friction connection units apply high pressure to the surfaces, which prevents the hub diameter from sitting properly and causes problems with slippage. The SAPC series uses servo motor torque specifications as the basis for reducing the bolt count and lowering pressure on surfaces, making it possible to connect to aluminum pulleys without difficulty.
  · Staged machining structure.
  Designed so that the push plate of the bearing could carry out its role, eliminating the need for the use of a separate bearing push plate.
  · Easy assembly and position setting.
  For conventional power locks, a space of 1 mm from there counterpart items is required to facilitate disassembly, but the SAPC series has a structure that is easy to disassemble even if there is no room for the hub to move during disassembly. Also, position setting is easy.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.56 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Self-centering locking Device with flange KBS16

  KBK

  · For connections in the smallest places
  · Very short design
  · No axial displacement during assembly
  · Self-centering
  · Torque range: 260 - 36100Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.67 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 2517 with Metric Drill

  CONCAR

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  Locking Assemblies 7070

  RINGFEDER

  Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Elements Slotted 8006 SST

  RINGFEDER

  Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  KanaLock, Model KL201MA, Standard Type

  KATAYAMA CHAIN

  Assembling it suppresses hub terminal surface and outer circumference vibration, constraints gear interval backlash, and also reduces belt vibration noise caused by timing pulley vibration.
  
  [Features]
  · Assembling KL201MA suppresses hub terminal surface and outer circumference vibration, constraints gear interval backlash, and also reduces belt drive noise caused by timing pulley vibration.
  · Compatible shaft diameters are ø5 to ø85, and compatible shaft tolerances are g5, g6, h5, h6, h7, and h8

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	53.37 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  KanaLock (Cost-Effective Product) Model KPL300

  KATAYAMA CHAIN

  [Features]
  · For model KPL300, mounting space has been extremely reduced in a radial direction, embedding of up to 4 KanaLocks can be selected.
  · This facilitates great torque transmission.
  · Boss hole and shaft hole fitting is up to H8/h8

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.27 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushing, Straight Type

  CAP

  Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.80 €
  Min. Shipping Days ：	58 Days

  *Unit price with basic configuration

• 

  Keyless Bushing, Standard Type (with Centering Function)

  CAP

  Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.70 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-B Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · SAPL-A Depending on the type, the cover outer diameter and bolt size are both large, providing comparatively high durability relative to the corresponding internal diameter.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.26 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Locking Assemblies 7012

  RINGFEDER

  Clamping set with a narrow design. Particularly suitable for tight installation conditions and coarser tolerance fluctuations with high power reserves.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies 7015

  RINGFEDER

  The self-centering precision clamping set for the transmission of maximum torques or axial forces with special demands on the concentricity of the parts to be clamped, as well as for applications subject to bending moments.Large transmittable circumferential forces - the long, shallow angles of the cones allow maximum torques or axial forces to be transmitted with a RfN 7015.0 clamping set. During assembly, the clamping set, shaft and hub remain in position relative to each other, thus ensuring additional safety in relation to 3-part construction types. Shaft and hub are only pressure loaded.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies 7061

  RINGFEDER

  Self-centering clamping set with rough surface pressure, the compact design is ideal for toothed disks.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies 7075

  RINGFEDER

  Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

Loading...