Leveling Mount Related Components
Adjuster-related parts are those used to immobilize a work bench or machine tool. There are leg anchor fittings, square pipe joints, fixing plates, etc. Leg anchor fittings prevent movement of the adjuster due to vibration, etc., and are available in standard type and anchor type. The feature is that the opening matches the flat diameter of the hexagonal part of each bolt. The square pipe joint is a joint for attaching the square pipe and the adjuster. The type differs depending on the size and compatible screw diameter, so it is necessary to check the size of the place of use.
74 items
* Information on days to ship, shipping costs and prices
KIPP
Levelling sets low version (K0694)
· For mounting motors, aggregates, drive elements and production lines· Low height · Alignments can be made easily and precisely even with several mounting points · Torsion-free mountingRead moreConfigure nowRegular price (excluding VAT):33.73 €～Standard shipping days:4 working days
- Volume Discount
ELESA
LW.A - Vibration-damping levelling elements -Steel base and stem
Vibration-damping levelling elements with base in zinc-plated steel, vibration-damping disk in NR rubber, hardness 80 Shore A, black colour, levelling plate in zinc-plated steel, packing ring O-ring in NBR synthetic rubber, threaded stem in zinc-plated steel and nut and washer in zinc-plated steel.Read moreConfigure nowRegular price (excluding VAT):41.23 €～Standard shipping days:1 working days
- Volume Discount
- Order quantities extended (D-JIT)
MISUMI
Mounting Nuts for Adjustment Pads
[Features] A special fixed plate for levelling brackets. [Material] EN 1.0038 Equiv. with surface treatment options: trivalent chromate.Read moreConfigure nowRegular price (excluding VAT):2.86 €～Standard shipping days:Stock item: 1 working daySome items can be shipped the same day
NORELEM
Levelling sets spherical washer with locknut (27708)
· For mounting motors, aggregates, drive elements and production lines· Exact alignment when mounting on inclined surfaces· Swivel angle up to 4° · Locknut secures a prescribed adjustment· Long travel 15 mm to 39 mmRead moreConfigure nowRegular price (excluding VAT):90.13 €～Standard shipping days:4 working days
KIPP
Levelling sets spherical washer (K0057)
· For mounting motors, aggregates, drive elements and production lines· Exact alignment when mounting on inclined surfaces· Swivel angle up to 4° · Long travel 15 mm to 50 mmRead moreConfigure nowRegular price (excluding VAT):59.17 €～Standard shipping days:4 working days
KIPP
Levelling sets with locknut (K0097)
· For mounting motors, aggregates, drive elements and production lines· Low height· Alignments can be made easily and precisely even with several mounting points· Torsion-free mounting· Locknut secures a prescribed adjustmentRead moreConfigure nowRegular price (excluding VAT):45.00 €～Standard shipping days:4 working days
NORELEM
Levelling sets spherical washer (27705)
· For mounting motors, aggregates, drive elements and production lines· Exact alignment during mounting· Swivel angle up to 4°Read moreConfigure nowRegular price (excluding VAT):54.91 €～Standard shipping days:4 working days
KIPP
· Application sectors: machine and equipment construction, logistics and assembly· Version: black oxidised· Different thread sizesRead moreConfigure nowRegular price (excluding VAT):12.36 €～Standard shipping days:4 working days
- Volume Discount
NABEYA
A simple adjuster with a swivel. Three types are available: S45C, resin pad, and SUS.Read moreConfigure nowRegular price (excluding VAT):14.08 €～Standard shipping days:6 working days
- DISCOUNTED
- Volume Discount
DAIWARASHI
Adjuster, Nut for Adjustment Bolt, for PN / PN I / PN II
A plate nut for mounting an adjuster that does not require a screw thread processing on the mating side note: Please be advised that the model number in VONA will change from "PN I" to "PN1."[Features]Press caulked to eliminate possibility of falling off.·Read more- CAD:
- 2D
Configure nowRegular price (excluding VAT):1.29 €～Regular price (excluding VAT):Special priceStandard shipping days:Stock item: 1 working daySome items can be shipped the same day
- Volume Discount
DAIWARASHI
Plate for Adjuster Leg Stopping Bracket D-H / W Types
An anchor plate for the general standard type to prevent lateral shifting.[Features]· The opening part of the leg stopping bracket has dimensions that match the flat diameter of the hexagonal part of various bolts.· Push in until the metal opening part makes contact with the hexagonal part of the bolt and tighten with an anchor bolt.Read more- CAD:
- 2D
Configure nowRegular price (excluding VAT):2.89 €～Standard shipping days:6 working days
- DISCOUNTED
YAHATA NEJI
Made from iron that has undergone trivalent chromate plating. Used in combination with an adjuster bolt to adjust the height of wooden fences, etc.Read moreConfigure nowRegular price (excluding VAT):1.16 €～Regular price (excluding VAT):Special priceStandard shipping days:Stock item: 1 working daySome items can be shipped the same day
KIPP
Levelling sets spherical washer with locknut (K0119)
· For mounting motors, aggregates, drive elements and production lines· Exact alignment when mounting on inclined surfaces· Swivel angle up to 4° · Locknut secures a prescribed adjustment· Long travel 15 mm to 39 mmRead moreConfigure nowRegular price (excluding VAT):75.11 €～Standard shipping days:4 working days
KIPP
· Universal elements for the elastic support of all types of machine · Application sectors: machine construction, ship building· Used to avoid horizontal movements· Prevents transfer of vibration and noise· Version: without or with shear protectionRead moreConfigure nowRegular price (excluding VAT):29.65 €～Standard shipping days:4 working days
NORELEM
Thrust pads DIN 6311 enhanced (07140)
· Is used together with a grub screw with thrust point for clamping · Material: steel or stainless steel · Form S: thrust pad with lock, Form T: low design, large clamping face with snap ringRead moreConfigure nowRegular price (excluding VAT):1.60 €～Standard shipping days:4 working days
NORELEM
· Threaded spindle with star grip· Simple assembly· Different thread sizesRead moreConfigure nowRegular price (excluding VAT):4.15 €～Standard shipping days:4 working days
NORELEM
Levelling sets spherical washer with locknut (27706)
· For mounting motors, aggregates, drive elements and production lines· Exact alignment when mounting inclined faces · Swivel angle up to 4°· Locknut secures a prescribed adjustmentRead moreConfigure nowRegular price (excluding VAT):76.48 €～Standard shipping days:4 working days
NORELEM
Levelling sets spherical washer (27707)
· For mounting motors, aggregates, drive elements and production lines· Exact alignment when mounting on inclined surfaces· Swivel angle up to 4° · Long travel 15 mm to 50 mmRead moreConfigure nowRegular price (excluding VAT):71.00 €～Standard shipping days:4 working days
NORELEM
Swivel feet ball joints with internal thread (27811)
· Components for assembling a swivel foot· Application sectors: machine and equipment construction, logistics and assembly· For direct fastening of swivel feet using standard screws· Any ball joint can be combined with any plate· Material: steel or 1.4301 stainless steelRead moreConfigure nowRegular price (excluding VAT):2.69 €～Standard shipping days:4 working days
- Volume Discount
MISUMI
Protection Caps for Adjustment Pads【20 pieces】
This safety cover can be placed on the protruding threaded section of the levelling holder.Read moreConfigure nowRegular price (excluding VAT):11.07 €～Standard shipping days:5 working days
- Volume Discount
NABEYA
A mounting plate for foot jacks. Four sizes are available including M8, M12, M16, and M20.[Features]· The hex nut is caulked to prevent it from falling off.Read moreConfigure nowRegular price (excluding VAT):4.15 €～Standard shipping days:7 working days
- DISCOUNTED
- Volume Discount
NABEYA
Level Adjustment Round-Face Nut.
A simplified jack comprised of a spherical-surface nut and taper washer. Can be tilted up to two degrees.[Features]· Can be tilted up to two degrees when used in combination with a spherical-surface nut and taper washer.· Taper washers have a smaller abutting surface area than spherical surface washers, enabling adjustments to be performed with lower torque.· An SUS304 material that is strong against rust.· Can be used in clean rooms.Read moreConfigure nowRegular price (excluding VAT):9.26 €～Regular price (excluding VAT):Special priceStandard shipping days:Stock item: 1 working daySome items can be shipped the same day
- DISCOUNTED
- Volume Discount
TAKIGEN
Stainless Steel Adjuster Holding Bracket KC-1275-C
A special holding bracket for level adjusters. Prevents the movement of machinery due to vibrations from machine tools.Read moreConfigure nowRegular price (excluding VAT):3.35 €～Regular price (excluding VAT):Special priceStandard shipping days:Stock item: 1 working daySome items can be shipped the same day
KIPP
Levelling sets high version (K0692)
· For mounting motors, aggregates, drive elements and production lines· Long travel 15 mm to 40 mm· Special sizes available on request · Accessory: K0691 Spherical levelling washersRead moreConfigure nowRegular price (excluding VAT):34.94 €～Standard shipping days:4 working days
KIPP
· Threaded spindle with star grip· Simple assembly· Different thread sizesRead moreConfigure nowRegular price (excluding VAT):3.39 €～Standard shipping days:4 working days
KIPP
Tube inserts square with tapped bush (K0430)
· For simple fastening of feet and castors on square tubes· Material: plugs fibreglass reinforced thermoplastic, threaded insert brass· Different thread sizesRead moreConfigure nowRegular price (excluding VAT):3.65 €～Standard shipping days:4 working days
NORELEM
Levelling sets with locknut (27701)
· For mounting motors, aggregates, drive elements and production lines· Locknut secures a prescribed adjustment · Special sizes available on requestRead moreConfigure nowRegular price (excluding VAT):51.45 €～Standard shipping days:4 working days
NORELEM
Levelling sets low version (27702)
· For mounting motors, aggregates, drive elements and production lines· Low height · Alignments can be made easily and precisely even with several mounting points · Torsion-free mountingRead moreConfigure nowRegular price (excluding VAT):40.48 €～Standard shipping days:4 working days
NORELEM
Tube inserts square with tapped bush (27835)
· For simple fastening of feet and castors on square tubes· Material: plugs fibreglass reinforced thermoplastic, threaded insert brass· Different thread sizesRead moreConfigure nowRegular price (excluding VAT):4.65 €～Standard shipping days:4 working days
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
MISUMI
Mounting Plates for Adjustment Pads
[Features] A fixed plate for levelling the brackets. [Material] Main body EN 1.4301 Equiv. (sintered)/EN 1.0038 Equiv.Read moreConfigure nowRegular price (excluding VAT):2.77 €～Standard shipping days:5 working days
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
MISUMI
Mounting Plates for Adjustment Pads / Thick / Centered Groove
[Features] A fixed plate for levelling brackets with a thickness of 4.5/6 mm.Read moreConfigure nowRegular price (excluding VAT):5.65 €～Standard shipping days:5 working days
- DISCOUNTED
- Volume Discount
- Order quantities extended (D-JIT)
MISUMI
Fixing Plates for Adjustment Pads / Economy
[Features] Price-oriented. A solid panel with high economic efficiency. [Material] EN 1.0038 Equiv.Read moreConfigure nowRegular price (excluding VAT):1.01 €～Regular price (excluding VAT):Special priceStandard shipping days:Stock item: 1 working daySome items can be shipped the same day
- DISCOUNTED
- Volume Discount
NABEYA
A joint for connecting square pipes and jacks. 10 variations available.Read moreConfigure nowRegular price (excluding VAT):15.66 €～Regular price (excluding VAT):Special priceStandard shipping days:Stock item: 1 working daySome items can be shipped the same day
- DISCOUNTED
- Volume Discount
NABEYA
A fixing plate for foot jacks. Two types: SS400 and SUS304.Read moreConfigure nowRegular price (excluding VAT):7.36 €～Regular price (excluding VAT):Special priceStandard shipping days:Stock item: 1 working daySome items can be shipped the same day
- DISCOUNTED
- Volume Discount
NABEYA
[Features]· A leveling plate for machinery and equipment.· Mounting and moving are easy.Read more- CAD:
- 2D
Configure nowRegular price (excluding VAT):26.42 €～Regular price (excluding VAT):Special priceStandard shipping days:Stock item: 1 working daySome items can be shipped the same day
- DISCOUNTED
TAKIGEN
To be mounted for improved vibration-proof performance. Prevents floor scratching.Read moreConfigure nowRegular price (excluding VAT):1.96 €～Regular price (excluding VAT):Special priceStandard shipping days:Stock item: 1 working daySame-day shipping possible
- DISCOUNTED
- Volume Discount
TAKIGEN
Adjuster Holding Bracket KC-275-C
A special holding bracket for level adjusters. Prevents the movement of machinery due to vibrations from machine tools.Read moreConfigure nowRegular price (excluding VAT):2.25 €～Regular price (excluding VAT):Special priceStandard shipping days:Stock item: 1 working daySome items can be shipped the same day
- DISCOUNTED
TAKIGEN
Adjuster Holding Bracket KC-282-E
An adjuster holding bracket for the special anchor bolt KC-282-B for vending machines.Read moreConfigure nowRegular price (excluding VAT):6.63 €Regular price (excluding VAT):Special priceStandard shipping days:Stock item: 1 working daySame-day shipping possible
- Volume Discount
TAKIGEN
The height of the level adjuster for the rear legs can be adjusted easily. Switching between up/down is easy.Read moreConfigure nowRegular price (excluding VAT):5.70 €～Standard shipping days:10 working days
TAKIGEN
The height of the level adjuster for the rear legs can be adjusted easily. Switching between up/down is easy.Read moreConfigure nowRegular price (excluding VAT):106.78 €Standard shipping days:10 working days
IWATA MFG
This is one of the most commonly used round cast iron levelling plates.Read moreConfigure nowRegular price (excluding VAT):24.77 €～Standard shipping days:6 working days
IWATA MFG
Can be used to support level adjustments for heavy machinery from the bottom up.Read moreConfigure nowRegular price (excluding VAT):38.90 €～Standard shipping days:9 working days
IWATA MFG
Can be used to support level adjustments for heavy machinery from the bottom up.[Features]· Convenient for when arranging machinery of different heights in a line, when cleaning under the machinery, and during maintenance.Read moreConfigure nowRegular price (excluding VAT):63.43 €～Standard shipping days:9 working days
YAHATA NEJI
Made from iron and can be used in combination with an adjuster bolt to adjust the height of wooden fences, etc.Read moreConfigure nowRegular price (excluding VAT):2.85 €Standard shipping days:7 working days
YAHATA NEJI
Made from iron and can be used in combination with an adjuster bolt to adjust the height of wooden fences, etc.Read moreConfigure nowRegular price (excluding VAT):3.07 €～Standard shipping days:7 working days