Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Rotary / Swivel Joints

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

Swivel ball joints

GANTER

GN 784 swivel ball joints allow precise and variable adjustment of the ball pivot within the rotation range. This is a particular advantage when adjusting scanners, cameras, lighting, monitors, etc.

Thanks to the efficient clamping mechanism, only small amounts of torque on the clamping screw result in comparatively strong clamping pressure on the ball. This force is easily applied by the clamping lever (Identification no.1).

The ball joint can be mounted from below with the d5 internal thread or together with the GN 784.1 flange, available as an accessory, using three through-holes from above.

For a permanent high stop torque, the contact surfaces of the balls must be kept free of grease. Exceeding the recommended tightening torque increases the securing of the ball joint in its end position, but may result in increased wear and potential failure of the clamping mechanism.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	46.00 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Swivel Joint JL-KC Series

BRIDGESTONE

For use in piping in civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery that use mineral hydraulic oil as fluid

Select to compare

Configure now
Starting from^∗ ：	75.56 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Swivel Joints, JL-DD Series

BRIDGESTONE

For use in piping for civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery using mineral hydraulic oil.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	108.79 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Flanges for swivel ball joints GN 784

GANTER

The GN 784.1 flanges are mounted from below onto the GN 784 swivel ball joints GN 784. A half-length tapered groove pin prevents any rotation.
The flange enables the swivel ball joints to be mounted on the upper surface. The d2 section with the three d3 drill holes is configured so that standard screws with washers can be used.

The half-length tapered groove pin is mounted on the flange. The countersunk screw is included separately.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	12.78 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

$Pressure Refraction Fitting Pearl Spail Joint AS Series$

Pressure Refraction Fitting Pearl Spail Joint AS Series

SHOWA GIKEN INDUSTRIAL

The AS Series swivel joint main units can be used rotated 360 degrees. These fittings can be used as stainless steel screw-in type joints in movable pipe lines. .

[Features]
· The pearl swivel joint can be used rotated 360 degrees. Double row ball bearings are incorporated into the bearings. These bearings are grease-lubricated. Therefore, the bearing has a high mechanical strength that can withstand large radial thrust and moment loads.
· A ring-shaped packing (other than an O-ring) is used in the seals. This provides a stable, simple-structured seal with no leakage of the internal pressurized fluid.
· The PK type use high temperature-resistant PTFE materials on the seal rings. Therefore, this type does not require any lubricating.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	175.09 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint ACW (Both Directions Inner Tube Rotation Screw-in Type)

SHOWA GIKEN INDUSTRIAL

ACW (Dual, screwed type, with rotating inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	826.22 €
Min. Shipping Days ：	15 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint ACFW (Double Entry Internal Pipe Rotation Flange-Mounted Type)

SHOWA GIKEN INDUSTRIAL

[Features]
· ACFW (Dual, flanged type, with rotating inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Select to compare

Configure now
Starting from^∗ ：	1,695.80 €
Min. Shipping Days ：	15 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint NC (Both Directions Inner Tube Fixed Screw-in Type)

SHOWA GIKEN INDUSTRIAL

NC (Dual, screwed type, with fixed inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	233.65 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint KCL (Single Direction Screw-in Type)

SHOWA GIKEN INDUSTRIAL

KCL (Single, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	115.89 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint KC (Both Directions Inner Tube Fixed Screw-in Type)

SHOWA GIKEN INDUSTRIAL

[Features]
- Model KC (Dual, screwed type, with fixed inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	142.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint RXH1000 (Single Direction Screw-in Type)

SHOWA GIKEN INDUSTRIAL

RXH1000 (Singe, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

[Features]
・The pearl rotary joint RX series features excellent durability and very high performance and two types are available: the RXE and RXH, each designed for different conditions of use.
A fine ceramic and carefully selected carbon seal ring are incorporated as a sealing material in this instrument, and thus high speed rotation and low torque are achieved along with ultra-precise lapping within two light bands of the sealing surface. Tracking of a high speed floating ring is achieved by adopting a floating seal ring with a detent key groove, and long-term seal stability is achieved.
· Main Body

Select to compare

Configure now
Starting from^∗ ：	160.67 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint RXH6100 (Both Directions Inner Tube Rotation Flange-Mounted Type)

SHOWA GIKEN INDUSTRIAL

RXH6100 (Dual, flanged type, with rotating inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Select to compare

Configure now
Starting from^∗ ：	244.15 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

Swivel Joint JL-GC Series

BRIDGESTONE

For use in piping for civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery using mineral hydraulic oil.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	80.90 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Rotary Joint JR-DC Series

BRIDGESTONE

For use in piping in civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery that use mineral hydraulic oil as fluid

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	126.67 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Swivel Joints - SJM Type

IHARA SCIENCE

[Features]
· Swivel joint for general hydraulics. Effective anti-torsion measure for hydraulic hoses that offers improved durability.
· The shape of the connection portion can be supported more easily than the shape of the equipment and the hose.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	96.78 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Swivel Joint SJS Type

IHARA SCIENCE

Swivel joint for general hydraulic pressure. Effective anti-torsion measure for hydraulic hoses that offers improved durability.

[Features]
· Used for pressure piping, this is a joint that allows slow rotation or oscillation (reciprocating rotary motion) and is used mainly for connecting a fixed pipe to a high-pressure hose. It is useful for preventing unreasonable hose attachment and twisting.
· SJS type.
· A product with a simple structure intended for general use.
· SJH type.
· The rotor peripheral surface, which is a rotating and sliding part, has been surface hardened in order to withstand harsh use, and a slipper seal with a very low degree of wear is used to suppress the drag of the O-ring and thus prevent wear.
· SJM type.
A product that is a straight swivel joint that rotates easily due to the placement of a steel ball in a sliding part.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.08 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

$Pressure Refraction Fitting Pearl Swivel Joint, A Series$

Pressure Refraction Fitting Pearl Swivel Joint, A Series

SHOWA GIKEN INDUSTRIAL

The A series of swivel joints are capable of 360-degree rotation. They can be used with ductile cast-iron (partial carbon steel) screw-in movable pipelines.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	125.76 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

$Pressure Refraction Fitting Pearl Swivel Joint, C Series$

Pressure Refraction Fitting Pearl Swivel Joint, C Series

SHOWA GIKEN INDUSTRIAL

The C series includes swivel joints capable of 360 degree rotation that can be used with the steel body (welded) flange type movable piping line-up.

Select to compare

Configure now
Starting from^∗ ：	456.05 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

$Pressure Refractive Joint Pearl Swivel Joint CS Series (Made of SUS)$

Pressure Refractive Joint Pearl Swivel Joint CS Series (Made of SUS)

SHOWA GIKEN INDUSTRIAL

The CS series is a swivel joint made of welded stainless steel (SUS), used for flanged movable pipelines, and capable of 360° rotation.

Select to compare

Configure now
Starting from^∗ ：	585.53 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

$Pressure Refraction Fitting Pearl Swivel Joint B Series$

Pressure Refraction Fitting Pearl Swivel Joint B Series

SHOWA GIKEN INDUSTRIAL

B series is a swivel joint for which the main unit can be used with a 360 degree rotation that can be used as a steel (welded) screw-in type movable pipe line.

Select to compare

Configure now
Starting from^∗ ：	194.81 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

$Pressure Refraction Fitting Pearl Swivel Joint, SRK Series$

Pressure Refraction Fitting Pearl Swivel Joint, SRK Series

SHOWA GIKEN INDUSTRIAL

The SRK series of swivel joints are capable of 360-degree rotation. They can be used with steel (welded) screw-in movable pipelines.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	340.15 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

$Pressure Refraction Coupling Pearl Swivel Joint, PK Series$

Pressure Refraction Coupling Pearl Swivel Joint, PK Series

SHOWA GIKEN INDUSTRIAL

The PK series of swivel joints are capable of 360-degree rotation. They can be used with the PK movable pipeline, carrying fluids up to 230 degrees C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	141.57 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint ACL (Single Direction Screw-in Type)

SHOWA GIKEN INDUSTRIAL

ACL (Single, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	313.84 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Pressure Rotary Fitting Pearl Rotary Joint AC (Duplex Inner Tube Fixed Screw-Mounted Type)

SHOWA GIKEN INDUSTRIAL

AC (Dual, screwed type, with fixed inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Select to compare

Configure now
Starting from^∗ ：	321.18 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Pressure Rotary Fitting Pearl Rotary Joint, ACF (Bidirectional Inner Tube Fixed Flange-Mounted Type)

SHOWA GIKEN INDUSTRIAL

ACF (Dual, flanged type, with fixed inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	370.50 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint NCL (Single Direction Screw-in Type)

SHOWA GIKEN INDUSTRIAL

NCL (Single, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Select to compare

Configure now
Starting from^∗ ：	224.42 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint SKCL (Single Direction Screw-in Type)

SHOWA GIKEN INDUSTRIAL

SKCL (Single, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Select to compare

Configure now
Starting from^∗ ：	162.10 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint RXE1000 (Single Direction Screw-in Type)

SHOWA GIKEN INDUSTRIAL

RXE1000 (Singe, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	127.78 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint RXE2100 (Single Direction Flange-Mounted Type)

SHOWA GIKEN INDUSTRIAL

RXE2100 (Single, flanged type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Select to compare

Configure now
Starting from^∗ ：	192.16 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint RXH2100 (Single Direction Flange-Mounted Type)

SHOWA GIKEN INDUSTRIAL

RXH2100 (Single, flanged type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Select to compare

Configure now
Starting from^∗ ：	233.02 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint RXE1300 (Single Direction Screw-in Type)

SHOWA GIKEN INDUSTRIAL

RXE1300 (Singe, screwed type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Select to compare

Configure now
Starting from^∗ ：	157.38 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint RXE3000 (Both Directions Inner Tube Fixed Screw-in Type)

SHOWA GIKEN INDUSTRIAL

RXE3000 (Dual, screwed type, with fixed inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	158.01 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint RXH3000 (Both Directions Inner Tube Fixed Screw-in Type)

SHOWA GIKEN INDUSTRIAL

RXH3000 (Dual, screwed type, with fixed inner tube) is a rotary joint designed to stably supply a medium to rotary equipment.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	188.88 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint RXE5000 (Both Directions Inner Tube Rotation Screw-in Type)

SHOWA GIKEN INDUSTRIAL

RXE5000 (Dual, screwed type, with rotating inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	161.30 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint RXH5000 (Both Directions Inner Tube Rotation Screw-in Type)

SHOWA GIKEN INDUSTRIAL

RXH5000 (Dual, screwed type, with rotating inner tube) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

Select to compare

Configure now
Starting from^∗ ：	192.16 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint RXE1000SUS (Single Direction Screw-in Type)

SHOWA GIKEN INDUSTRIAL

RXE1000SUS (Singe, screwed type) is a rotary joint designed to stably supply a medium to rotary equipment.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	320.42 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Pressure Rotary Joint Pearl Rotary Joint SXO Series Straight Type

SHOWA GIKEN INDUSTRIAL

SXO series (Straight type) is a rotary joint for supplying the medium to rotary equipment in a stable manner.

[Features]
· Lightweight and compact for easy handling.
· Simple sealing structure for easy maintenance.
· Superior sealing performance achieved via ultra-precise finish.
· Supports high pressure and high speed applications.
· Use of a high grade seal (TCC) is also supported for a higher load specification

Select to compare

Configure now
Starting from^∗ ：	233.02 €
Min. Shipping Days ：	14 Days

*Unit price with basic configuration

Pressure Rotary Fitting Pearl Rotary Joint, RXE / RXH4100 (Duplex Inner Tube Fixed Flange-Mounted Type)

SHOWA GIKEN INDUSTRIAL

With respect to the RXE/RXH4100 (bidirectional inner tube fixed flange-mounted type) and the Pearl Rotary Joint RX Series have excellent durability and extremely high performance. There are two types of RXE RXH available that fit the usage conditions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	209.36 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Pressure Rotary Fitting Pearl Rotary Joint KCF (Flange-Mounted Type)

SHOWA GIKEN INDUSTRIAL

KCF (Flanged type) is a rotary joint designed to stably supply a medium to rotary equipment.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	207.97 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Swivel Joints JL-DC Series

BRIDGESTONE

For use in piping for civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery using mineral hydraulic oil.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	74.81 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Swivel Joint JL-CC Series

BRIDGESTONE

For use in piping in civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery that use mineral hydraulic oil as fluid

Select to compare

Configure now
Starting from^∗ ：	81.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Swivel Joints, JL-CG Series

BRIDGESTONE

For use in piping in civil engineering and construction machinery, manufacturing machinery, and general hydraulic machinery that use mineral hydraulic oil as a fluid

Select to compare

Configure now
Starting from^∗ ：	95.10 €
Min. Shipping Days ：	45 Days

*Unit price with basic configuration

Swivel Joint SJH Shape

IHARA SCIENCE

Swivel joint for general hydraulic pressure. Effective anti-torsion measure for hydraulic hoses that offers improved durability.

[Features]
· Used for pressure piping, this is a joint that allows slow rotation or oscillation (reciprocating rotary motion) and is used mainly for connecting a fixed pipe to a high-pressure hose. It is useful for preventing unreasonable hose attachment and twisting.
· In order to handle extreme applications, the rotor outer surface (the rotation sliding part) is treated with surface hardener, and a slipper seal with extremely low wear is used in order to suppress co-rotation of the O-ring and to prevent wear.

Select to compare

Configure now
Starting from^∗ ：	150.29 €
Min. Shipping Days ：	23 Days

*Unit price with basic configuration

Sling Swivels, Female Threaded to Male Threaded

IFIELD

[Features]
● Can be easily installed and removed using a hex bar wrench to/from narrow spaces, including deeper spaces.
● Application (IN, OUT, etc.) are identified by color.
"1 axis × 360 degree" rotation and free angle setting.

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	13.57 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Sling Swivels, Female Threaded to Male Threaded, Two Axes

IFIELD

[Features]
● Can be easily installed and removed using a hex bar wrench to/from narrow spaces, including deeper spaces.
● Application (IN, OUT, etc.) is identified by color.
"2 axis × 360 degree" rotation and can be set to any direction.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	18.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Type
Applicable Fluids
Maximum Operating Temperature(°C)
Max Operating Pressure(MPa)
Max. Rotational Speed(r.p.m)
Connection Type
Types of Connection Screw for Supply Side (Composite)
Types of Connection Screw for Exhaust Side (Composite)
Types of Connection Screw for Rotor Side (Composite)
Nominal Connection Screw for Supply Side (Composite)
Nominal Connection Screw for Exhaust Side (Composite)
Types of Connection Screw Supply Side (Single unit, swivel)
Type of Connection Screw Exhaust Side (Single unit, swivel)
Nominal Connection Screw Supply Side (Single unit, swivel)
Nominal Connection Screw Exhaust Side (Single unit, swivel)
Nominal of Flange Connection

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare $Pressure Refraction Fitting Pearl Spail Joint AS Series$	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare $Pressure Refraction Fitting Pearl Swivel Joint, A Series$	Select to compare $Pressure Refraction Fitting Pearl Swivel Joint, C Series$	Select to compare $Pressure Refractive Joint Pearl Swivel Joint CS Series (Made of SUS)$	Select to compare $Pressure Refraction Fitting Pearl Swivel Joint B Series$	Select to compare $Pressure Refraction Fitting Pearl Swivel Joint, SRK Series$	Select to compare $Pressure Refraction Coupling Pearl Swivel Joint, PK Series$	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	GANTER	BRIDGESTONE	BRIDGESTONE	GANTER	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	BRIDGESTONE	BRIDGESTONE	IHARA SCIENCE	IHARA SCIENCE	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	SHOWA GIKEN INDUSTRIAL	BRIDGESTONE	BRIDGESTONE	BRIDGESTONE	IHARA SCIENCE	IFIELD	IFIELD
Product Series	Swivel ball joints	Swivel Joint JL-KC Series	Swivel Joints, JL-DD Series	Flanges for swivel ball joints GN 784	Pressure Refraction Fitting Pearl Spail Joint AS Series	Pressure Rotary Joint Pearl Rotary Joint ACW (Both Directions Inner Tube Rotation Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint ACFW (Double Entry Internal Pipe Rotation Flange-Mounted Type)	Pressure Rotary Joint Pearl Rotary Joint NC (Both Directions Inner Tube Fixed Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint KCL (Single Direction Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint KC (Both Directions Inner Tube Fixed Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint RXH1000 (Single Direction Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint RXH6100 (Both Directions Inner Tube Rotation Flange-Mounted Type)	Swivel Joint JL-GC Series	Rotary Joint JR-DC Series	Swivel Joints - SJM Type	Swivel Joint SJS Type	Pressure Refraction Fitting Pearl Swivel Joint, A Series	Pressure Refraction Fitting Pearl Swivel Joint, C Series	Pressure Refractive Joint Pearl Swivel Joint CS Series (Made of SUS)	Pressure Refraction Fitting Pearl Swivel Joint B Series	Pressure Refraction Fitting Pearl Swivel Joint, SRK Series	Pressure Refraction Coupling Pearl Swivel Joint, PK Series	Pressure Rotary Joint Pearl Rotary Joint ACL (Single Direction Screw-in Type)	Pressure Rotary Fitting Pearl Rotary Joint AC (Duplex Inner Tube Fixed Screw-Mounted Type)	Pressure Rotary Fitting Pearl Rotary Joint, ACF (Bidirectional Inner Tube Fixed Flange-Mounted Type)	Pressure Rotary Joint Pearl Rotary Joint NCL (Single Direction Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint SKCL (Single Direction Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint RXE1000 (Single Direction Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint RXE2100 (Single Direction Flange-Mounted Type)	Pressure Rotary Joint Pearl Rotary Joint RXH2100 (Single Direction Flange-Mounted Type)	Pressure Rotary Joint Pearl Rotary Joint RXE1300 (Single Direction Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint RXE3000 (Both Directions Inner Tube Fixed Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint RXH3000 (Both Directions Inner Tube Fixed Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint RXE5000 (Both Directions Inner Tube Rotation Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint RXH5000 (Both Directions Inner Tube Rotation Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint RXE1000SUS (Single Direction Screw-in Type)	Pressure Rotary Joint Pearl Rotary Joint SXO Series Straight Type	Pressure Rotary Fitting Pearl Rotary Joint, RXE / RXH4100 (Duplex Inner Tube Fixed Flange-Mounted Type)	Pressure Rotary Fitting Pearl Rotary Joint KCF (Flange-Mounted Type)	Swivel Joints JL-DC Series	Swivel Joint JL-CC Series	Swivel Joints, JL-CG Series	Swivel Joint SJH Shape	Sling Swivels, Female Threaded to Male Threaded	Sling Swivels, Female Threaded to Male Threaded, Two Axes
CAD	2D / 3D			2D / 3D																																								2D	2D
Starting from^∗	46.00 € *Unit price with basic configuration Volume Discount	75.56 € *Unit price with basic configuration	108.79 € *Unit price with basic configuration Volume Discount	12.78 € *Unit price with basic configuration Volume Discount	175.09 € *Unit price with basic configuration Volume Discount	826.22 € *Unit price with basic configuration Volume Discount	1,695.80 € *Unit price with basic configuration	233.65 € *Unit price with basic configuration Volume Discount	115.89 € *Unit price with basic configuration Volume Discount	142.20 € *Unit price with basic configuration Volume Discount	160.67 € *Unit price with basic configuration	244.15 € *Unit price with basic configuration	80.90 € *Unit price with basic configuration Volume Discount	126.67 € *Unit price with basic configuration Volume Discount	96.78 € *Unit price with basic configuration Volume Discount	49.08 € *Unit price with basic configuration Volume Discount	125.76 € *Unit price with basic configuration Volume Discount	456.05 € *Unit price with basic configuration	585.53 € *Unit price with basic configuration	194.81 € *Unit price with basic configuration	340.15 € *Unit price with basic configuration Volume Discount	141.57 € *Unit price with basic configuration Volume Discount	313.84 € *Unit price with basic configuration Volume Discount	321.18 € *Unit price with basic configuration	370.50 € *Unit price with basic configuration Volume Discount	224.42 € *Unit price with basic configuration	162.10 € *Unit price with basic configuration	127.78 € *Unit price with basic configuration Volume Discount	192.16 € *Unit price with basic configuration	233.02 € *Unit price with basic configuration	157.38 € *Unit price with basic configuration	158.01 € *Unit price with basic configuration Volume Discount	188.88 € *Unit price with basic configuration Volume Discount	161.30 € *Unit price with basic configuration Volume Discount	192.16 € *Unit price with basic configuration	320.42 € *Unit price with basic configuration Volume Discount	233.02 € *Unit price with basic configuration	209.36 € *Unit price with basic configuration Volume Discount	207.97 € *Unit price with basic configuration Volume Discount	74.81 € *Unit price with basic configuration Volume Discount	81.15 € *Unit price with basic configuration	95.10 € *Unit price with basic configuration	150.29 € *Unit price with basic configuration	13.57 € *Unit price with basic configuration Volume Discount	18.08 € *Unit price with basic configuration
Min. Shipping Days	Same day	Same day	9 Days	Same day	Same day	15 Days	15 Days	10 Days	Same day	5 Days	7 Days	11 Days	5 Days	Same day	Same day	Same day	5 Days	10 Days	10 Days	10 Days	10 Days	10 Days	7 Days	7 Days	10 Days	10 Days	12 Days	5 Days	7 Days	10 Days	10 Days	5 Days	10 Days	10 Days	10 Days	10 Days	14 Days	10 Days	10 Days	Same day	5 Days	45 Days	23 Days	Same day	5 Days
Type	-	Swivel Joints	Swivel Joints	-	Swivel Joints	Duplex Inner Tube Rotary Type	Duplex Inner Tube Rotary Type	Duplex Inner Tube Fixed Type	Simplex	Duplex Inner Tube Fixed Type	Simplex	Duplex Inner Tube Rotary Type	Swivel Joints	Simplex	Swivel Joints	Swivel Joints	Swivel Joints	Swivel Joints	Swivel Joints	Swivel Joints	Swivel Joints	Swivel Joints	Simplex	Duplex Inner Tube Fixed Type	Duplex Inner Tube Fixed Type	Simplex	Simplex	Simplex	Simplex	Simplex	Simplex	Duplex Inner Tube Fixed Type	Duplex Inner Tube Fixed Type	Duplex Inner Tube Rotary Type	Duplex Inner Tube Rotary Type	Simplex	Simplex	Duplex Inner Tube Fixed Type	Duplex Inner Tube Fixed Type	Swivel Joints	Swivel Joints	Swivel Joints	Swivel Joints	Swivel Joints	Swivel Joints
Applicable Fluids	-	Oil	Oil	-	Water / Air / Gas / Oil	Water / Air / Vapor / Oil	Water / Air / Vapor / Oil	Vapor / Oil	Water / Air / Gas / Oil	Water / Air / Vapor / Gas / Oil	Water / Oil	Water / Oil	Oil	Oil	Oil	Oil	Water / Air / Gas / Oil	Water / Air / Gas / Oil	Water / Air / Gas / Oil	Water / Air / Gas / Oil	Water / Air / Gas / Oil	Water / Air / Vapor / Gas / Oil	Water / Air / Vapor / Oil	Water / Air / Vapor / Oil	Water / Air / Vapor / Oil	Vapor / Oil	Water / Air / Gas / Oil	Water / Air / Vapor / Gas / Oil	Water / Air / Vapor / Gas / Oil	Water / Oil	Water / Air / Vapor / Gas / Oil	Water / Air / Gas / Oil	Water / Oil	Water / Air / Gas / Oil	Water / Oil	Water / Air / Gas / Oil	Water / Oil	Water / Air / Gas / Oil	Water / Air / Vapor / Gas / Oil	Oil	Oil	Oil	Oil	Air	Air
Maximum Operating Temperature(°C)	-	100	100	-	100 ～ 180	180	180	180	100	100	150	150	100	100	95	95	100 ～ 180	100 ～ 160	100 ～ 180	100	100	230	180	180	180	180	100	100	100	150	100	100	150	100	150	100	120	100 ～ 150	100	100	100	100	95	60	60
Max Operating Pressure(MPa)	-	20.5	20.5	-	4.1	1.47	1.47	1.47	0.98	0.98	1.18 ～ 2.25	1.18 ～ 2.25	20.5	20.5	-	-	4.1	2.1	2.1	13.7	34.3	2.3	1.47	1.47	1.47	1.47	0.98	1.18 ～ 2.25	1.18 ～ 2.25	1.18 ～ 2.25	1	1.18 ～ 2.25	1.18 ～ 2.25	1.67 ～ 2.25	1.67 ～ 2.25	2.25	6.9	1.18 ～ 2.25	0.98	20.5	20.5	20.5	-	1	1
Max. Rotational Speed(r.p.m)	-	10	10	-	-	300	150	150 ～ 300	1000 ～ 1500	1000 ～ 1500	750 ～ 3500	750 ～ 3500	10	10	-	-	-	-	-	-	-	-	150 ～ 300	300	300	150 ～ 300	1500	750 ～ 3500	750 ～ 3500	750 ～ 3500	3500	750 ～ 3500	750 ～ 3500	2000 ～ 3500	2000 ～ 3500	3500	10000	750 ～ 3500	1000 ～ 1500	10	10	10	-	-	-
Connection Type	-	Thread-to-Thread, Connection	Thread-to-Thread, Connection	-	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Flange Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection / Thread-to-Flange Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Flange Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Flange-to-Flange connection	Flange-to-Flange connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Flange Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Flange Connection	Thread-to-Flange Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Flange Connection	Thread-to-Flange Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection	Thread-to-Thread, Connection
Types of Connection Screw for Supply Side (Composite)	-	-	-	-	-	Rc	Rc	Rc	-	Rc	-	Rc	-	-	-	-	-	-	-	-	-	-	-	Rc	Rc	-	-	-	-	-	-	Rc	Rc	Rc	Rc	-	-	Rc	Rc	-	-	-	-	-	-
Types of Connection Screw for Exhaust Side (Composite)	-	-	-	-	-	Rc	Rc	Rc	-	Rc	-	Rc	-	-	-	-	-	-	-	-	-	-	-	Rc	Rc	-	-	-	-	-	-	Rc	Rc	Rc	Rc	-	-	Rc	Rc	-	-	-	-	-	-
Types of Connection Screw for Rotor Side (Composite)	-	-	-	-	-	R	-	R	-	R	-	-	-	-	-	-	-	-	-	-	-	-	-	R	-	-	-	-	-	-	-	R / G / M / NPT / UNF / UNS / UN	R / G / M / NPT / UNF / UNS / UN	R / G / M	R / G / M	-	-	-	-	-	-	-	-	-	-
Nominal Connection Screw for Supply Side (Composite)	-	-	-	-	-	1B	1 1/2B	1B ～ 3/4B	-	1 1/2B ～ 3/8B	-	1B ～ 3/8B	-	-	-	-	-	-	-	-	-	-	-	1B ～ 3/4B	1B ～ 3/4B	-	-	-	-	-	-	1B ～ 3/8B	1B ～ 3/8B	1/2B ～ 3/8B	1/2B ～ 3/8B	-	-	1B ～ 3/8B	1 1/2B ～ 3/8B	-	-	-	-	-	-
Nominal Connection Screw for Exhaust Side (Composite)	-	-	-	-	-	1B	2B	1B ～ 3/4B	-	1B ～ 3/4B	-	1B ～ 3/4B	-	-	-	-	-	-	-	-	-	-	-	1B ～ 3/4B	1B ～ 3/4B	-	-	-	-	-	-	1B ～ 3/4B	1B ～ 3/4B	1B ～ 3/4B	1B ～ 3/4B	-	-	1B ～ 3/4B	1B ～ 3/4B	-	-	-	-	-	-
Types of Connection Screw Supply Side (Single unit, swivel)	-	G	Rc	-	Rc	-	-	-	Rc	-	Rc / NPT	-	G	Rc	R / Rc / G	Rc / G	Rc	-	-	Rc	Rc	Rc	Rc	-	-	Rc	Rc	Rc / NPT	Rc	Rc	Rc	-	-	-	-	Rc	Rc / NPT	-	-	Rc	R	R	Rc / G	R	R
Type of Connection Screw Exhaust Side (Single unit, swivel)	-	R	Rc	-	Rc	-	-	-	R	-	R / G / M / NPT / UNF / UNS / UN	-	R	R	R / Rc	R	Rc	-	-	Rc	Rc	Rc	R	-	-	R	G	R / G / M / NPT / UNF / UNS / UN	-	-	M	-	-	-	-	R	M / UNF	-	-	R	R	G	R / Rc	Rc	Rc
Nominal Connection Screw Supply Side (Single unit, swivel)	-	1/2B ～ 3/8B	1B ～ 1/4B	-	1B ～ 3/8B	-	-	-	1B ～ 3/8B	-	1B ～ 3/8B	-	1B ～ 3/8B	1/2B ～ 3/8B	1B ～ 3/8B	1 1/4B ～ 3/8B	1B ～ 4B	-	-	1B ～ 3/8B	1B ～ 3/8B	1B ～ 3/4B	1 1/2B ～ 3/4B	-	-	1B ～ 3/4B	3/8B	1B ～ 3/8B	1B ～ 3/4B	1B ～ 3/4B	1B ～ 3/8B	-	-	-	-	1B ～ 3/8B	1/4B ～ 3/8B	-	-	1B ～ 3/8B	1/2B ～ 3/8B	3/8B	1B ～ 3/8B	1/4B ～ 1/8B	1/4B ～ 1/8B
Nominal Connection Screw Exhaust Side (Single unit, swivel)	-	1/2B ～ 3/8B	1B ～ 1/4B	-	10A ～ 50A	-	-	-	1B ～ 3/8B	-	1B ～ M50x1.5	-	1B ～ 3/8B	1/2B ～ 3/8B	1B ～ 3/8B	1 1/4B ～ 3/8B	10A ～ 100A	-	-	10A ～ 40A	10A ～ 40A	15A ～ 50A	1 1/2B ～ 3/4B	-	-	1B ～ 3/4B	3/8B	1B ～ M50x1.5	-	-	M16x1.5 ～ M33x1.5	-	-	-	-	1B ～ 3/8B	5/8-18 ～ M16x1.5	-	-	1B ～ 3/8B	1/2B ～ 3/8B	3/8B	1B ～ 3/8B	1/4B ～ 1/8B	1/4B ～ 1/8B
Nominal of Flange Connection	-	-	-	-	-	-	-	-	1B ～ 3/8B	-	-	-	-	-	-	-	-	1 1/2B ～ 2 1/2B	1 1/2B ～ 100A	-	-	-	-	-	-	-	-	-	1B ～ 3/4B	1B ～ 3/4B	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-