Shipping Days |
|
---|
?* Information on days to ship
THK
The holder is perpendicular to the ball shank.
With grease pockets on the top and bottom of the spherical area, this model has high lubricity and high wear resistance.
Starting from∗ : | 7.46 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
Min. Shipping Days : | 4 Days |
---|
Starting from∗ : | 7.84 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
Starting from∗ : | 10.81 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
Starting from∗ : | 5.46 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
THK
This model is a highly rigid rod end that is basically the same as the female threaded model PHS, but has a male thread on the holder end.
* The rod end shown in the photo is a representative product.
Thread sizes M5 and M6 do not come with a nipple. Lubricate the bearing directly.
Starting from∗ : | 12.44 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
THK
An oil free type rod end that uses self-lubricating synthetic plastic formed between the steel holder and the spherical inner ring.
The gap on the sliding surface is minimized, allowing accurate link motion to be achieved.
[Features]
· NHS-T Type (oil free type)
Starting from∗ : | 13.56 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
GANTER
Ball joint thrust pads GN 346 are in general used for transfer of clamping forces. They adjust themselves to uneven or non-parallel surfaces and clamp without twisting the clamped parts.
The values were arrived at by a series of tests whereby a limited number of ball joint pads were subjected for a limited time to a vertical static load to the pads.
At the values given in the table a permanent deformation of the ball is almost impossible.
Ball joint thrust pads GN 346 can also be used as levelling feet with a small foot diameter.
Starting from∗ : | 6.49 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
GANTER
Ball joint heads GN 648.1 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
Starting from∗ : | 12.39 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
Starting from∗ : | 7.62 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
THK
Highly rigid with superior abrasion and corrosion resistance.
The correct amount of lubricant can be supplied to the sliding surface via the grease nipple attached to the holder.
[Features]
· Lubrication: Lubricate before use. There is a lubrication hole and oil groove on the holder, so it can be lubricated via the grease nipple.
· Left-hand female thread identification: For left-hand female threads, the letter "L" is added. "L" is marked on the holder of the product.
Starting from∗ : | 12.67 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
OZAK
(Features)
Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.
Starting from∗ : | 10.68 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
GANTER
Stainless Steel-Ball joint heads GN 648.6 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
Starting from∗ : | 27.94 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
Starting from∗ : | 2.56 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
OZAK
(Features)
Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.
Starting from∗ : | 11.64 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
Starting from∗ : | 53.34 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
GANTER
Stainless Steel-Ball joint heads GN 648.5 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
Starting from∗ : | 27.94 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
THK
A highly rigid spherical bearing with superior corrosion and abrasion resistance. The sliding surface of the bearing can be thoroughly lubricated from the oil groove and lubrication hole on the outer ring.
Starting from∗ : | 12.67 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
GANTER
Ball joint heads GN 648.2 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
Starting from∗ : | 12.06 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
GANTER
Ball joints GN 648.8 are similar to DIN ISO 12240-4, series K.
These ball joints are integrated in the ball joint heads GN 648.1 and GN 648.2.
Starting from∗ : | 10.43 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
INA
Starting from∗ : | 38.55 € |
---|---|
Min. Shipping Days : | 3 Days |
*Unit price with basic configuration
IGUS
Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight KBR(L)M
Starting from∗ : | 4.76 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
GANTER
Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
The angle of rotation for the type with safety catch (Types CS, BS) ist 15°, without safety catch (Types C, B) is 18°.
For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
To protect the angled ball point, a dust cap GN 710 can be added.
The hexagon nut is part of the angled ball joints.
Dust caps GN 710 have to be ordered seperately.
Starting from∗ : | 2.31 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
THK
This model is an oil free type rod end that is basically the same as the female threaded model NHS-T, but has a male thread on the holder end.
Starting from∗ : | 12.44 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
TRUSCO NAKAYAMA
[Features]· An oil free type rod end with a self-lubricating plastic liner bonded to the surface of the raceway for the ball.[Applications]· Various transport machinery parts· Various manufacturing machinery parts· FA equipment.·Packaging machinery parts·Textile machinery parts·Agricultural machinery parts· Robot parts.
Starting from∗ : | 15.39 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
Starting from∗ : | 3.14 € |
---|---|
Min. Shipping Days : | 3 Days |
*Unit price with basic configuration
GANTER
Stainless Steel-Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
The angle of rotation for the type with safety catch (Type CSN) is 15°, without safety catch (Type CN) is 18°.
For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
To protect the angled ball point, a dust cap GN 710 can be added.
The hexagon nut is part of the angled ball joints.
Dust caps GN 710 have to be ordered seperately.
Starting from∗ : | 16.70 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
Starting from∗ : | 8.13 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
IGUS
Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight AGRM
Starting from∗ : | 3.82 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
Starting from∗ : | 24.18 € |
---|---|
Min. Shipping Days : | 3 Days |
*Unit price with basic configuration
Starting from∗ : | 64.01 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
IGUS
Easy to install and press fit. Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight EFSM
Starting from∗ : | 8.00 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
IGUS
Easy to install and press fit. Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight KSTM
Starting from∗ : | 6.58 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
IGUS
Easy to install and press fit. Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight EGLM
Starting from∗ : | 6.76 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
IGUS
Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight WGRM
Min. Shipping Days : | 14 Days |
---|
TRUSCO NAKAYAMA
[Features]· Excellent abrasion and corrosion resistance with superior rigidity· Lubricant can be supplied to the sliding surface via a grease nipple on the body.[Applications]· Various transport machinery parts· Various manufacturing machinery parts· FA equipment.·Packaging machinery parts·Textile machinery parts·Agricultural machinery parts· Robot parts.
Starting from∗ : | 14.26 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
INA
Starting from∗ : | 13.29 € |
---|---|
Min. Shipping Days : | 4 Days |
*Unit price with basic configuration
INA
Min. Shipping Days : | Same day |
---|
THK
The mounting bolt and holder are arranged on the same axis, allowing this model to bear an axial load.
The boot contains grease, providing high lubricity and high abrasion resistance.
Starting from∗ : | 9.13 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
IGUS
Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight KAR(L)M
Starting from∗ : | 6.62 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
MINEBEA
The rod end requires no lubrication, and is made of stainless steel (303 for the body, 440C for the ball),
giving it excellent anti-corrosion characteristics so it can be used in a wide range of general purpose applications.
[Features]
· The fluoropolymer liner is bonded to the inner diameter of the body.
· The moving load should be kept within the rated static load since the load performance of the fluoropolymer liner is larger than the static fracture load of the body.
· If exposed to shock and vibration, damage is possible even if the load is kept under the rated load. Internal diameter sizes 15 mm and above are built-to-order.
Starting from∗ : | 16.41 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
MINEBEA
The rod end requires no lubrication, and is made of stainless steel (303 for the body, 440C for the ball),
giving it excellent anti-corrosion characteristics so it can be used in a wide range of general purpose applications.
Starting from∗ : | 17.55 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
Min. Shipping Days : | 4 Days |
---|
THK
The most widely used series in Japan. It is used for heavy loads since the spherical contact area has a large width.
The outer ring is split at two points to accommodate the inner ring.
Starting from∗ : | 16.01 € |
---|---|
Special price | |
Min. Shipping Days : | Same day |
*Unit price with basic configuration
IGUS
igubal® rod ends can also be used in rough environments. They are corrosion-resistant in humid environments and resistant to weak acids and bases. Depending on the version (HT) the operation temperature is from –30 °C up to +80 °C. Rod ends are also resistant to dirt and dust. Furthermore they are also available for high temperatures ("HT"-from -40°C bis +200°C) and as detectable version ("DT).
Starting from∗ : | 7.74 € |
---|---|
Min. Shipping Days : | 14 Days |
*Unit price with basic configuration
Brand |
---|
Product Series |
CAD |
Starting from∗ |
Min. Shipping Days |
Specifications |
Type |
Tpyes of Rod End Bearing |
Spherical Bearing Type |
Main Body Material |
Connection screw M |
I.D. D(φ) |
Connection screw shape |
Connection screw direction |
The material of a ball |
Liner Material |
Allowable Incline Angle α(deg) |
Lubricating Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||
Brand | THK | SKF | MISUMI | MISUMI | MISUMI | THK | THK | GANTER | GANTER | MISUMI | THK | OZAK | GANTER | SKF | OZAK | MISUMI | GANTER | THK | GANTER | GANTER | INA | IGUS | GANTER | THK | TRUSCO NAKAYAMA | REYHER | GANTER | SKF | IGUS | INA | ELGES | IGUS | IGUS | IGUS | IGUS | TRUSCO NAKAYAMA | INA | INA | THK | IGUS | MINEBEA | MINEBEA | DURBAL | THK | IGUS |
Product Series | Axial spherical plain bearings GE..-AX, requiring maintenance, to DIN ISO 12 240-3 | TRUSCO Rod End, Oil Free Type, Male Thread【1-2 Pieces Per Package】 | ELGES Hydraulic Rod End Requiring Maintenance with Thread Clamping, Din 24338/ISO 6982, Open | TRUSCO Rod End, Lubricated Type, Male Thread【1-2 Pieces Per Package】 | Radial spherical plain bearings GE..-FW, maintenance-free, to DIN ISO 12 240-1 | Radial spherical plain bearings GE..-UK, maintenance-free, to DIN ISO 12 240-1 | Rod End Bearing, Right Male Thread, Fluoropolymer Type 2 Piece RBT-E | Rod End Bearing, Right Female Thread, Fluoropolymer Type 2 Piece RBT | |||||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||
Starting from∗ | 7.46 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | - | 7.84 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 10.81 € *Unit price with basic configuration Volume Discount | 5.46 € *Unit price with basic configuration Volume Discount | 12.44 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 13.56 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 6.49 € *Unit price with basic configuration Volume Discount | 12.39 € *Unit price with basic configuration Volume Discount | 7.62 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 12.67 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 10.68 € *Unit price with basic configuration Volume Discount | 27.94 € *Unit price with basic configuration Volume Discount | 2.56 € *Unit price with basic configuration | 11.64 € *Unit price with basic configuration Volume Discount | 53.34 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 27.94 € *Unit price with basic configuration Volume Discount | 12.67 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 12.06 € *Unit price with basic configuration Volume Discount | 10.43 € *Unit price with basic configuration Volume Discount | 38.55 € *Unit price with basic configuration Volume Discount | 4.76 € *Unit price with basic configuration Volume Discount | 2.31 € *Unit price with basic configuration Volume Discount | 12.44 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 15.39 € *Unit price with basic configuration Volume Discount | 3.14 € *Unit price with basic configuration Volume Discount | 16.70 € *Unit price with basic configuration Volume Discount | 8.13 € *Unit price with basic configuration | 3.82 € *Unit price with basic configuration Volume Discount | 24.18 € *Unit price with basic configuration Volume Discount | 64.01 € *Unit price with basic configuration | 8.00 € *Unit price with basic configuration Volume Discount | 6.58 € *Unit price with basic configuration Volume Discount | 6.76 € *Unit price with basic configuration Volume Discount | - Volume Discount | 14.26 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 13.29 € *Unit price with basic configuration Volume Discount | - Volume Discount | 9.13 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 6.62 € *Unit price with basic configuration Volume Discount | 16.41 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 17.55 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | - | 16.01 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2022Volume Discount | 7.74 € *Unit price with basic configuration Volume Discount |
Min. Shipping Days | Same day | 4 Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 5 Days | Same day | Same day | Same day | Same day | Same day | Same day | 3 Days | Same day | Same day | Same day | Same day | 3 Days | Same day | 5 Days | Same day | 3 Days | 5 Days | 6 Days | Same day | Same day | 14 Days | Same day | 4 Days | Same day | Same day | Same day | Same day | Same day | 4 Days | Same day | 14 Days |
Specifications |
|
|
|
| |||||||||||||||||||||||||||||||||||||||||
Type | Rod End Bearing | - | Rod End Bearing | Spherical Bearing | Rod End Bearing | Rod End Bearing | Rod End Bearing | - | - | Rod End Bearing | Rod End Bearing | Rod End Bearing | - | - | Rod End Bearing | Spherical Bearing | - | Spherical Bearing | - | - | - | Rod End Bearing | - | Rod End Bearing | Rod End Bearing | - | - | - | Rod End Bearing | - | - | Spherical Bearing | Spherical Bearing | Spherical Bearing | Rod End Bearing | Rod End Bearing | - | - | Rod End Bearing | Rod End Bearing | Rod End Bearing | Rod End Bearing | - | Spherical Bearing | Rod End Bearing |
Tpyes of Rod End Bearing | Link Ball L | - | Standard | - | Link Ball L | Standard | Standard | - | - | Link Ball Straight | Standard | Standard | - | - | Standard | - | - | - | - | - | - | Standard | - | Standard | Standard | Link Ball L | - | - | Link Ball Straight | - | - | - | - | - | Link Ball L | Standard | - | - | Link Ball Straight | Standard | Standard | Standard | - | - | Standard |
Spherical Bearing Type | - | - | - | Standard | - | - | - | - | - | - | - | - | - | - | - | Flange Type 4 Hole | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | Flange Type 4 Hole | Pillow Block A | Standard | - | - | - | - | - | - | - | - | - | Standard | - |
Main Body Material | Aluminum ~ High strength zinc alloy | - | Stainless Steel ~ Steel | Steel | Aluminum ~ High strength zinc alloy | Steel | Steel | - | - | High strength zinc alloy | Steel | Steel | - | - | Steel | Steel | - | Steel | - | - | - | Resin | - | Steel | Steel | Steel | - | - | Resin | - | Steel | Resin | Resin | Resin | Resin | Steel | - | - | High strength zinc alloy | Resin | Stainless Steel | Stainless Steel | - | Steel | Resin |
Connection screw M | M4 ~ M16 | - | M3 ~ M22 | - | M4 ~ M16 | M5 ~ M30 | M3 ~ M22 | M8 ~ M16 | M4 ~ M30 | M5 ~ M16 | M5 ~ M30 | M5 ~ M30 | M5 ~ M30 | - | M5 ~ M30 | - | M5 ~ M30 | - | M5 ~ M30 | - | - | M2 ~ M30 | M5 ~ M14 | M3 ~ M22 | M5 | M5 ~ M14 | M5 ~ M14 | - | M8 | - | - | - | - | - | M5 ~ M10 | M5 | - | - | M5 ~ M16 | M5 ~ M30 | M5 ~ M10 | M5 ~ M12 | - | - | M5 ~ M30 |
I.D. D(φ) | - | 17 ~ 260 | 3 ~ 22 | 5 ~ 30 | - | - | - | - | - | - | - | 5 ~ 30 | - | 3 ~ 100 | 5 ~ 30 | 5 ~ 30 | - | 5 ~ 30 | - | - | 10 ~ 45 | 2 ~ 30 | - | - | 5 ~ 22 | 8 ~ 19 | - | 4 ~ 220 | - | 17 ~ 300 | 20 ~ 40 | 4 ~ 30 | 5 ~ 30 | 4 ~ 30 | - | 5 ~ 22 | 10 ~ 25 | 6 ~ 30 | - | 5 ~ 30 | 5 ~ 10 | 5 ~ 12 | 5 ~ 60 | 12 ~ 130 | 5 ~ 30 |
Connection screw shape | Female Thread | - | Male thread / Female Thread | - | - | Male thread | Female Thread | - | - | - | Female Thread | Female Thread | - | Male thread / Female Thread | Female Thread | - | - | - | - | - | - | - | - | Male thread | Male thread | Female Thread | - | Male thread | - | - | - | - | - | - | - | Male thread | - | - | Male thread | - | Male thread | Female Thread | - | - | - |
Connection screw direction | Right Screw / Left Screw | - | Right Screw / Left Screw | - | Right Screw / Left Screw | Right Screw / Left Screw | Right Screw / Left Screw | - | - | Right Screw / Left Screw | Right Screw / Left Screw | Right Screw / Left Screw | - | Right Screw / Left Screw | Right Screw / Left Screw | - | - | - | - | - | - | - | - | Right Screw / Left Screw | Right Screw / Left Screw | Right Screw | - | Right Screw | - | - | - | - | - | - | - | Right Screw / Left Screw | - | - | Right Screw / Left Screw | - | Right Screw | Right Screw | - | - | - |
The material of a ball | Steel | - | Stainless Steel ~ Steel | Steel | - | Steel | Steel | - | - | - | Steel | Steel | - | - | Steel | Steel | - | Steel | - | - | - | Resin | - | Steel | Steel | Steel | - | - | Resin | - | - | Resin | Resin | Resin | Resin | Steel | - | - | Steel | Resin | Stainless Steel | Stainless Steel | - | Steel | Resin |
Liner Material | - | - | Resin ~ Special Copper Alloy | Special Copper Alloy | - | Special Copper Alloy | Resin | - | - | - | Special Copper Alloy | Special Copper Alloy | - | - | Special Copper Alloy | Special Copper Alloy | - | Special Copper Alloy | - | - | - | Resin | - | Resin | Resin | Steel | - | - | Resin | - | - | Resin | Resin | Resin | Resin | Resin | - | - | - | Resin | Resin | Resin | - | - | Resin |
Allowable Incline Angle α(deg) | 30 ~ 40 | - | - | - | 30 ~ 40 | 8 ~ 10 | 8 ~ 10 | - | - | 17 ~ 25 | 8 ~ 10 | 4.5 ~ 12 | - | - | 4.5 ~ 12 | - | - | 8 ~ 10 | - | - | 6 ~ 10 | - | - | 8 ~ 10 | 13 ~ 16 | - | - | - | - | 5 ~ 10 | - | - | - | - | - | 13 ~ 16 | 16 ~ 19 | 6 ~ 15 | 17 ~ 25 | - | 10 ~ 12 | 12 | - | 3 ~ 5 | - |
Lubricating Method | Lubrication | - | - | - | - | Lubrication | Oil-Free | - | - | - | Lubrication | Lubrication | - | - | Lubrication | - | - | Lubrication | - | - | - | - | - | Oil-Free | Oil-Free | - | - | - | - | - | - | - | - | - | - | Lubrication | - | - | Lubrication | - | Oil-Free | Oil-Free | - | Lubrication | - |
Loading...
Please assist us in our effort to improve this site.
Please give us a feedback on the MISUMI e-Catalog.
Thank you for your cooperation.
If you wish to receive our response,please use the inquiry form.