- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 2:30 1/10/2023 to 0:30 (CEST) 2/10/2023. We apologize for the inconvenience.
Eye-Bolts, U-Bolts for Plumbing
Search by sub-category
?* Information on days to ship and prices
-
DIN 580 Lifting eye bolts, Steel
GANTER
These lifting eye bolts correspond to standard sheet DIN 580.
The following guidelines of lifting eye bolts DIN 580 the have to be observed in addition to the load values given in the above table.
The eye bolt must be of fully screwd in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the bolt.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Volume Discount
› Configure nowStarting from∗ ： 2.53 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/09/2023
Lifting eye bolts (rotating), Steel
GANTER
The lifting eye bolts GN 581are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580).
Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring.
Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 82.46 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lifting eye bolts, Stainless Steel A2
GANTER
The following guidelines for Stainless Steel-Lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table.
The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the bolt.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Volume Discount
› Configure nowStarting from∗ ： 5.37 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/09/2023
Swing Bolts, DIN 444, form B
HALDER
Swing bolts similar to DIN 444 however, steel design with higher quality 8.8. The stainless steel A2-50 design has a tensile strength of min. 500 N/mm2.- 3D CAD data available
› Configure nowStarting from∗ ： 4.22 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 0.81 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/09/2023
Swing bolts with long threaded bolt
GANTER
GN 1524 swing bolts offer a longer threaded bolt contrary to DIN 444.
For stocking purposes cylinder head shoulder bolts GN 732 can be used for the sizes M8, M10 and M12.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 6.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 6.15 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 2.92 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 2.92 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/09/2023
Lifting Pin Self-Locking
HALDER
[Features]
· Corrosion resistant
· Heat resistant to 250°C
· Locating· Bushing use one from 22350.0900 to 0.0936 (for d1 = 8, 10, 12, 16).
· Fitting for hanging that is speedy and simple to use yet solid.
· The movable shackle is equipped with a safety bar to prevent the button from being pushed unintentionally.
· A tap hole is not required for the item to be hung, only a H11 hole is needed.- 3D CAD data available
› Configure nowStarting from∗ ： 70.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lifting eye bolts (rotating), Stainless Steel
GANTER
Stainless Steel-Lifting eye bolts GN 581.5 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in Stainless Steel-Lifting eye bolts DIN 580).
Stainless Steel-Lifting eye bolts GN 581.5 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Stainless Steel-Lifting eye bolts GN 581.5 eye bolts comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 182.91 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/09/2023
Lifting eye bolts, Stainless Steel A4
GANTER
The following guidelines for Stainless Steel-Lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table.
The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the bolt.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Volume Discount
› Configure nowStarting from∗ ： 11.97 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/09/2023
Stainless Steel-Swing bolts with long threaded bolt
GANTER
Stainless Steel-Swing bolts GN 1524 offer a longer threaded bolt contrary to DIN 444.
For stocking purposes cylinder head shoulder bolts GN 732 can be used for the sizes M8, M10 and M12.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 10.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Eye Bolt Screws【1-200 Pieces Per Package】
SUNCO
It can be used for a variety of purposes such as lifting or as a replacement for joints. It is generally used as a hinge for doors, gates, etc., with the round hole in the screw head serving as the axis.- Volume Discount
› Configure nowStarting from∗ ： 2.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Threaded Lifting Pins, self-locking
HALDER
Heavy-duty lifting element for quick and easy use, with moveable shackle and locking stud to provide protection against unintentional unlocking. For lifting loads, the threaded lifting pin is inserted into a threaded hole. In contrast to a ringbolt, time-consuming screwing in and out is therefore unnecessary.
All versions are corrosion-protected. The version made from stainless steel is also resistant to corrosion and weathering, so it is also suitable for external use. In addition, the high-strength, precipitation-hardened pin makes extreme loads possible.
[Operation]
The threaded elements are unlocked by pressing the button.› Configure nowStarting from∗ ： 186.99 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 1.15 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Sling Swivels, self-locking / Stainless steel 1.4305
HALDER
Parts can be connected fast and easy with the sling swivel in combination with the locating bushings.As a robust tool, the item is made from stainless steel. There is an uncoated variant available in addition to the black standard version. The sling swivel is maintenance-free, soundless and secured against loss.- Volume Discount
› Configure nowStarting from∗ ： 17.55 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 81.14 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 1.50 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lifting eye nuts (rotating), Steel
GANTER
Lifting eye nuts GN 583 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye nuts DIN 582).
Lifting eye nuts GN 583 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Lifting eye nuts GN 583 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket nut cannot be removed from the ring.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 100.14 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 5.17 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/09/2023
Lifting eye nuts, Stainless Steel A2
GANTER
The following guidelines of the Stainless Steel-Lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the nut.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Volume Discount
› Configure nowStarting from∗ ： 5.61 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/09/2023
Lifting Pin, Self-Locking, Stainless Steel
HALDER
[Features]
· Has high corrosion and weather resistance enabling use outdoors
· Pin part uses hardened stainless steel and so has high strength
· Operating temperature range is to a maximum of 250°C
· Locating· Bushing use from 22350.0900 to 0.0936 (d1 = 8, 10, 12, 16) as well.
· Fitting for hanging that is speedy and simple to use yet solid. The movable shackle is equipped with a safety bar to prevent the button from being pushed unintentionally. A tap hole is not required for the item to be hung, only a H11 hole is needed.- 3D CAD data available
› Configure nowStarting from∗ ： 127.17 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/09/2023
Lifting eye nuts, Stainless Steel A4
GANTER
The following guidelines of the Stainless Steel-Lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the nut.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Volume Discount
› Configure nowStarting from∗ ： 11.99 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 19.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Ball Lock Connectors, self-locking, with holder, compact construction
HALDER
Parts can be connected fast and easily with the ball lock connector in combination with the locating bushings.
The locating bushings are made from stainless steel. There are two versions available that can be mounted into wood and one version that can be mounted into plastic.
As a robust tool, the item is made from stainless steel. The ball lock connector is maintenance-free, soundless and secured against loss.
[Operation]
The balls are unlocked by pressing the knob.› Configure nowStarting from∗ ： 6.71 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 4.83 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/09/2023
Locating· For Bushing Lifting Pin
HALDER
This bushing is a reliable holder for the safety of the lifting pin EH22350. [Features]
· Mounting is simple and reliable.
· Can be mounted to products made of various material.
· Can be used in narrow areas or blind holes.
· High corrosion resistance
· Wear resistant- 3D CAD data available
› Configure nowStarting from∗ ： 34.64 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
ART 88536 FISCHER-Dübel
REYHER
Dübel u. Anker für Gerüste u. Fassaden (FISCHER); FISCHER-Dübel und Anker; Gerüsthalter (Dübel / Ringösen)- Volume Discount
› Configure nowStarting from∗ ： 2.04 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 1.59 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 8.06 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/09/2023
Lifting eye nuts, Steel
GANTER
The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
Both threads must be of a equal length and the base material of equal strength to that of the nut.
Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.- Volume Discount
› Configure nowStarting from∗ ： 2.57 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 14.09 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 1.08 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Screw Nominal (M) |
| Length L (mm) |
| Material |
| Surface Treatment |
| Pitch(mm) |
| Tip Shape |
| Strength Class (Steel) |
| Thread Type |
| Sales Unit |
| Screw Nominal (inch) |
| Application |
| Screw Type |
| Technical Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | HALDER | REYHER | GANTER | MISUMI | KIPP | KIPP | HALDER | GANTER | GANTER | GANTER | SUNCO | HALDER | KIPP | HALDER | REYHER | REYHER | GANTER | KIPP | GANTER | HALDER | GANTER | SUNCO | HALDER | KIPP | HALDER | REYHER | REYHER | REYHER | GANTER | HALDER | KIPP |
| Product Series | Ball Lock Connectors, self-locking, with holder, compact construction | Ball Lock Connectors, self-locking, holder / Bushing holder, function Nominal mm / mm / mm | ||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||
| Starting from∗ | 2.53 € *Unit price with basic configuration Volume Discount | 82.46 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2023Volume Discount | 5.37 € *Unit price with basic configuration Volume Discount | 4.22 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2023 | 0.81 € *Unit price with basic configuration Volume Discount | 6.45 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2023Volume Discount | 6.15 € *Unit price with basic configuration Volume Discount | 2.92 € *Unit price with basic configuration | 2.92 € *Unit price with basic configuration | 70.26 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2023 | 182.91 € *Unit price with basic configuration Volume Discount | 11.97 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2023Volume Discount | 10.89 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2023Volume Discount | 2.74 € *Unit price with basic configuration Volume Discount | 186.99 € *Unit price with basic configuration | 1.15 € *Unit price with basic configuration | 17.55 € *Unit price with basic configuration Volume Discount | 81.14 € *Unit price with basic configuration Volume Discount | 1.50 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2023Volume Discount | 100.14 € *Unit price with basic configuration Volume Discount | 5.17 € *Unit price with basic configuration | 5.61 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2023Volume Discount | 127.17 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2023 | 11.99 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2023Volume Discount | 19.05 € *Unit price with basic configuration | 6.71 € *Unit price with basic configuration | 4.83 € *Unit price with basic configuration | 34.64 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2023 | 2.04 € *Unit price with basic configuration Volume Discount | 1.59 € *Unit price with basic configuration Volume Discount | 8.06 € *Unit price with basic configuration Volume Discount | 2.57 € Special price *Unit price with basic configuration Promotional pricing ends 30/09/2023Volume Discount | 14.09 € *Unit price with basic configuration | 1.08 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 4 Days | 4 Days | Same day | 4 Days | Same day | Same day | 6 Days | 2 Days | 4 Days | 3 Days | 3 Days | Same day | 4 Days | 4 Days | Same day | Same day | Same day | 6 Days | 2 Days | 4 Days | Same day | 3 Days | Same day | 3 Days | Same day | 1 Day | 4 Days |
| Screw Nominal (M) | M 8 ～ M 36 | M 6 ～ M 36 | M 8 ～ M 24 | M5 ～ M24 | - | M 6 ～ M 24 | 6 ～ 16 | 6 ～ 24 | 5 ～ 20 | - | M 12 ～ M 24 | M 10 ～ M 24 | M 6 ～ M 20 | 6 ～ 30 | - | 8 ～ 24 | - | - | - | M 8 ～ M 30 | 8 ～ 20 | M 8 ～ M 24 | - | M 10 ～ M 24 | - | - | 8 ～ 20 | - | - | - | - | M 8 ～ M 36 | - | 8 ～ 24 |
| Length L (mm) | - | - | - | 25 ～ 200 | - | 50 ～ 240 | 30 ～ 100 | - | - | - | - | - | 50 ～ 160 | 25 ～ 400 | - | - | - | - | - | - | - | - | - | - | 140 | - | - | - | - | - | - | - | - | - |
| Material | Steel | - | Stainless Steel | Stainless Steel ～ Steel | - | - | Stainless Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | - | - | Stainless Steel | Stainless Steel | Stainless Steel ～ Steel | - | Stainless Steel ～ Steel | - | - | - | - | Stainless Steel | Stainless Steel | - | Stainless Steel | Steel | - | Stainless Steel | - | - | - | - | Steel | - | Stainless Steel ～ Steel |
| Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | Not Provided / Black Oxide / Trivalent Chromate / Bright Chrome Plating | - | - | - | - | - | - | - | - | - | - | Not Provided | - | - | - | - | - | - | - | - | - |
| Pitch(mm) | - | - | - | - | - | - | 1 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip Shape | - | - | - | Flat End | - | - | Flat End | - | - | - | - | - | - | Rounded End | - | - | - | - | - | - | - | - | - | - | Flat End | - | - | - | - | - | - | - | - | - |
| Strength Class (Steel) | - | - | - | 8.8 | - | - | - | 8.8 | 8.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Type | - | - | - | Metric Coarse | - | - | Metric Coarse | - | - | - | - | - | - | Metric Coarse | - | - | - | - | - | - | - | - | - | - | Whit Coarse | - | - | - | - | - | - | - | - | - |
| Sales Unit | - | - | - | - | - | - | - | - | - | - | - | - | - | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | - | - | - | - | - | - | - | - | - | - | Low Quantity (Available beginning with 1 pc.) | - | - | - | - | - | - | - | - | - |
| Screw Nominal (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3/4 | - | - | - | - | - | - | - | - | - |
| Application | - | - | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Type | - | - | - | Semi-finished Bolt | - | - | Semi-finished Bolt | - | - | - | - | - | - | Semi-finished Bolt | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Technical Standard | DIN | - | - | DIN | DIN | - | - | - | - | - | - | - | - | - | - | - | - | DIN | DIN | - | - | - | - | - | - | - | - | - | - | DIN | DIN | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Nominal (M)
-
Length L (mm)
-
Material
-
Surface Treatment
- Not Provided
- Black Oxide
- Trivalent Chromate
- Bright Chrome Plating
-
Pitch(mm)
-
Tip Shape
-
Strength Class (Steel)
-
Thread Type
-
Sales Unit
-
Screw Nominal (inch)
-
Application
-
Screw Type
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 1 Day or Less
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 12 Days or Less
Categories related to Eye-Bolts, U-Bolts for Plumbing
-
- Cross Recessed Bolts
- Micro Screws, Pan Head Machine Screws for Precision Instruments
- Screw-Washer Assembly
- Self Tapping Screws, Taptite High Tech Screws
- Self-Drill Screws
- Tamper Proof Button Head Cap Screws
- Hex Bolts
- Hexagon socket screws
- Space Saving Bolts
- Small Screws
- Screws with Through Hole
- Hex Socket Button Head Cap Screws
- Hex Socket Flat Head Cap Screws
- Unified screw, Inch screw
- Set screws
- Threaded Rods / Stud Bolts
- Wing Screws / Knurled Screws / Ornamental Screws
- Square bolts
- Plastic Screws
- Cover Screws
- Stripper Bolts / Reamer Bolts / Shoulder Bolts
- Eye-Bolts, U-Bolts for Plumbing
- U-Bolts
- Fastening Related Components
- Bolt
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.