Thread Inserts - Tangless
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
› Configure now
Starting from∗ ： 1.90 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tangless Insert
RECOIL
The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.- Volume Discount
› Configure nowStarting from∗ ： 0.50 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tangless Insert Metric Coarse Phosphor Bronze
ACCURATE
We recommend using this on anti-magnetic works or locations.- Volume Discount
› Configure nowStarting from∗ ： 0.64 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Serrated locking plates, Stainless Steel
GANTER
With the aid of Stainless Steel-Serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.
The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.
The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 11.86 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel Tangless Insert
SUNCO
[Nominal M] 2, 2.5, 2.6, 3, 4, 5, 6, , 8, 10, 12, 16, 20
[Material] Stainless Steel
[Surface Processing] Bare- Volume Discount
› Configure nowStarting from∗ ： 0.67 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tangless Insert Metric Coarse
ACCURATE
An insert with no tang that does not require folding to remove. A product that eliminates the time and cost required to perform the insertion operation that would otherwise be needed when tangs are present.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.41 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Screw Reinforcement Tangless Insert【10-20 Pieces Per Package】
KS SANGYO
Tangless insert screw.
[Features]
· This tangless insert drastically cuts down on work procedures and time, which increases work efficiency, making it possible to reduce costs.
· Insert work, which took 56 seconds in the past, was drastically shortened to 7 seconds by using a dedicated power tool.
· Tangless design means no tangs to break off and no concerns for missing pitches or damaging the base material.
[Applications]
· For reinforcement of materials such as aluminum and plastic where female threads have low strength.
· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
· Repairs and reforms broken, worn out, and crushed female threads.› Configure nowStarting from∗ ： 14.81 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tangless Insert Metric Coarse Locking
ACCURATE
A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.- Volume Discount
› Configure nowStarting from∗ ： 0.71 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tangless Insert Unified Coarse
ACCURATE
Unified size tangless insert that reduces the number of work steps and greatly reduces working cost compared to inserts with a tang.- Volume Discount
› Configure nowStarting from∗ ： 0.98 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Stainless Steel-Serrated locking plates, for welding (GN 188)
GANTER
With the aid of Stainless Steel-Serrated locking plates GN 188, standard components can be interlocked and firmly attached in defined angular increments. They are joined by welding.The toothing is positioned exactly on the alignment holes d4, which guarantees a parallel or right-angled arrangement.The thrust spring is placed between the toothed discs during assembly and ensures that the toothed discs separate properly when loosening. The scope of delivery includes two serrated locking plates, one thrust spring and, depending on the version, a threaded bushing.- Volume Discount
› Configure nowStarting from∗ ： 12.02 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tangless Insert Metric Coarse Taping Packaging
ACCURATE
We prevent incorrect quantities by shipping using tape and packaging. Aims to improve efficiency through using electric tools in combination.- Volume Discount
› Configure nowStarting from∗ ： 1.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 4.06 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 11.36 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For own stockpiling or for a large number of uses, buying per carton is advantageous.- Stock
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 63.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Guide pots, Stainless Steel
GANTER
Guide pots, Stainless Steel- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 10.18 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 9.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Thrust springs, Stainless Steel
GANTER
Thrust springs, Stainless Steel- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.54 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tangless Insert Unified Fine
ACCURATE
Unified size tangless insert that reduces the number of work steps and greatly reduces working cost compared to inserts with a tang.- Volume Discount
› Configure nowStarting from∗ ： 0.72 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tangless Insert Repair Kit
ACCURATE
All-in-One Tool and Ball Used For Work Including Pilot Hole Work and Insertion› Configure nowStarting from∗ ： 139.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Serrated locking plates, Sintered Steel
GANTER
With the aid of serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.
The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.
The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 8.80 € Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Application |
| Material |
| Screw Type |
| Screw Dia. M (after insertion)(mm) |
| Thread Dia. (After inserted), Unified(inch) |
| Length L (after insertion) (D = Thread Dia. M) |
| Notch |
| Shape |
| Sales Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | RECOIL | ACCURATE | GANTER | SUNCO | ACCURATE | KS SANGYO | ACCURATE | ACCURATE | GANTER | ACCURATE | GANTER | GANTER | MISUMI | GANTER | GANTER | GANTER | ACCURATE | ACCURATE | GANTER |
| Product Series | Screw Reinforcement Tangless Insert【10-20 Pieces Per Package】 | Stainless Steel-Serrated locking plates, for welding (GN 188) | ||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
| ||||||||||||
| Starting from∗ | 1.90 € *Unit price with basic configuration Volume Discount | 0.50 € *Unit price with basic configuration Volume Discount | 0.64 € *Unit price with basic configuration Volume Discount | 11.86 € *Unit price with basic configuration Volume Discount | 0.67 € *Unit price with basic configuration Volume Discount | 0.41 € *Unit price with basic configuration Volume Discount | 14.81 € *Unit price with basic configuration | 0.71 € *Unit price with basic configuration Volume Discount | 0.98 € *Unit price with basic configuration Volume Discount | 12.02 € *Unit price with basic configuration Volume Discount | 1.07 € *Unit price with basic configuration Volume Discount | 4.06 € *Unit price with basic configuration Volume Discount | 11.36 € *Unit price with basic configuration Volume Discount | 63.26 € *Unit price with basic configuration | 10.18 € *Unit price with basic configuration Volume Discount | 9.26 € *Unit price with basic configuration Volume Discount | 0.54 € *Unit price with basic configuration Volume Discount | 0.72 € *Unit price with basic configuration Volume Discount | 139.07 € *Unit price with basic configuration | 8.80 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 5 Days | 5 Days | 5 Days | 7 Days | 7 Days | 5 Days | 5 Days | Same day | Same day | Same day | 5 Days | Same day |
| Specifications |
| |||||||||||||||||||
| Type | Tangless | Tangless | Tangless | - | Tangless | Tangless | Tangless | Tangless | Tangless | - | Tangless | - | - | Tangless | - | - | - | Tangless | Tangless | - |
| Application | Light Metal | Light Metal | Light Metal / Cast Iron / Resin General | - | - | Light Metal / Cast Iron / Resin General | Light Metal / Cast Iron / Resin General | Light Metal / Cast Iron / Resin General | Light Metal / Cast Iron / Resin General | - | Light Metal / Cast Iron / Resin General | - | - | Light Metal | - | - | - | Light Metal / Cast Iron / Resin General | - | - |
| Material | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Phosphor Bronze | Stainless Steel | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Stainless Steel | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | - | - | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Stainless Steel | Steel | - | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | - | Steel |
| Screw Type | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | - | Metric (Coarse) Thread | - | - | Metric (Coarse) Thread | - | - | - | Unified (Fine) Thread | Metric (Coarse) Thread | - |
| Screw Dia. M (after insertion)(mm) | 2.5 ～ 10 | 2.5 ～ 12 | 3 ～ 6 | - | 2 ～ 20 | 2 ～ 24 | 2 ～ 12 | 2.5 ～ 12 | - | - | 2.5 ～ 5 | - | - | 2.5 ～ 8 | - | - | - | - | - | - |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | 1/4 ～ 10 | - | - | - | - | - | - | - | - | 1/4 ～ 10 | - | - |
| Length L (after insertion) (D = Thread Dia. M) | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D | - | - | - | 1D | 1.5D | - |
| Notch | Not Provided | Not Provided | - | - | Provided | Not Provided | Provided | - | - | - | - | - | - | Not Provided | - | - | - | - | - | - |
| Shape | - | - | - | - | Standard | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | - | Low Quantity (Available beginning with 1 pc.) | - | Box, Pkg. | - | - | - | - | - | - | Box, Pkg. | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Application
-
Material
-
Screw Type
-
Screw Dia. M (after insertion)(mm)
-
Thread Dia. (After inserted), Unified(inch)
-
Length L (after insertion) (D = Thread Dia. M)
-
Notch
-
Shape
-
Sales Unit
CAD data type
-
- 2D
- 3D
Categories related to Thread Inserts - Tangless
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.