Thread Inserts
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Self-Tapping Inserts / Slotted
MISUMI
It is a split groove threaded insert, threaded on both the inner and outer diameters.
Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.24 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Insert Nitronics 60
RECOIL
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).- Volume Discount
Configure nowStarting from∗ ： 2.80 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】
TOKAI METAL INDUSTRY
A general-purpose well-balanced screw insert with low cost.
[Features]
・ At the time of press-fit, the product has direction.
・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.- Volume Discount
Configure nowStarting from∗ ： 0.16 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Insert Phosphor Bronze
RECOIL
Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).- Volume Discount
Configure nowStarting from∗ ： 1.02 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Ensat, Slotted Type 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
- Stock
Configure nowStarting from∗ ： 0.48 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI METAL INDUSTRY
These inserts are the best choice for easy and secure fitment into plastic holes.- Volume Discount
Configure nowStarting from∗ ： 0.20 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Ensat, Ultra Coarse Outside Screw, Type 309
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.- Volume Discount
Configure nowStarting from∗ ： 0.50 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingConfigure nowStarting from∗ ： 1.34 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Threaded inserts self-tapping with cutting slot (K0978)
KIPP
[Specifications]
・Version 1: Self-tapping
・Version 2: With cutting slot
・Material: Stainless steel, Steel
・Surface finish body: Bright, galvanised
・D1=Internal thread: M3-M16
[Features]
・For making high-strength screw connections in materials with low shear strength
・Guarantees secure and firm anchoring in the host material
・Ideal for difficult-to-machine materials
・Version: steel or stainless steel- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.36 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1.03 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Ensat, Chip-Free / Short, Type 337
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
Configure nowStarting from∗ ： 1.06 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Brass Ultrasert IV (Flanged) / HFU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 3/4/5/6/8
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingConfigure nowStarting from∗ ： 0.54 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Stainless Steel / Insert Nut Threaded Type / IRU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingConfigure nowStarting from∗ ： 0.98 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Threaded inserts self-tapping with cutting bores (K0979)
KIPP
[Specifications]
・Version 1: Self-tapping
・Version 2: With cutting bore
・Material: Stainless steel, Steel
・D1=Internal thread: M3-M12
[Features]
・For making high-strength screw connections in materials with low shear strength
・Guarantees secure and firm anchoring in the host material
・Ideal for difficult-to-machine materials
・Version: steel or stainless steel- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.51 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.- Volume Discount
- Stock
Configure nowStarting from∗ ： 0.29 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Brass Bit Insert (Flanged) / HFB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingConfigure nowStarting from∗ ： 0.42 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Threaded inserts reinforced (K0399)
KIPP
[Specifications]
・Version 1: Reinforced
・Material: Steel, Stainless steel
・Core drill φ(mm): 6.9-31
・D1=Internal thread: M4-M24x2
[Features]
・Stronger cross section for inserts with an increased load
・Enables tapped holes which have been damaged to be used again or repaired
・Suitable for use in various materials
・Quick and easy installation
・No other special tools are needed besides the assembly tool- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3.69 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Threaded Inserts (K0398)
KIPP
[Specifications]
・Version 1: Standard
・Material: Steel, Stainless steel
・Core drill φ(mm): 6.9-14.8
・D1=Internal thread: M5-M12x1.25
[Features]
・Enables tapped holes which have been damaged to be used again or repaired
・Suitable for use in various materials
・Quick and easy installation
・No other special tools are needed besides the assembly tool- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3.69 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Ensat Three-Hole / Short 307 Type
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
Configure nowStarting from∗ ： 1.00 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Brass Insert Nut (Screw-In Type) IRB / IRB-C
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingConfigure nowStarting from∗ ： 0.64 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Threaded inserts reinforced (07661)
NORELEM
· Stronger cross section for inserts with an increased load
· Enables tapped holes which have been damaged to be used again or repaired
· Suitable for use in various materials
· Quick and easy installation
· No other special tools are needed besides the assembly toolConfigure nowStarting from∗ ： 4.43 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 0.36 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Ensat, Type 308, 3-Hole / Long Size
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
Configure nowStarting from∗ ： 1.12 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Techlock (SL)【1-5,000 Pieces Per Package】
JAPAN DRIVE-IT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8- Volume Discount
Configure nowStarting from∗ ： 0.23 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Insert bushings, Aluminium
GANTER
Drive the insert bushings GN 992 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.
The dimensions match those of the construction tubes GN 990, but checking the tolerance position of the tube is recommended.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 8.90 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Screwsert (Type SCT)
JAPAN DRIVE-IT
[Type] Self-tapping Used
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
[L](D = screw diameter M) 2D 2.5D
[Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0- Volume Discount
Configure nowStarting from∗ ： 1.03 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingConfigure nowStarting from∗ ： 1.34 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Threaded inserts self-tapping with cutting slot (07652)
NORELEM
· For making high-strength screw connections in materials with low shear strength
· Guarantees secure and firm anchoring in the host material
· Ideal for difficult-to-machine materials
· Version: steel or stainless steelConfigure nowStarting from∗ ： 0.43 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Insert SUS316
RECOIL
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).- Volume Discount
Configure nowStarting from∗ ： 0.49 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Insert, Inconel X-750
RECOIL
The color of the main body will become silver when the method of heat treatment changes.
Not plated. (Inconel Black Recoil)
An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.
[Features]
· Nickel alloy.
· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.- Volume Discount
Configure nowStarting from∗ ： 20.98 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingConfigure nowStarting from∗ ： 0.78 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Insert bushings
GANTER
Drive the Stainless Steel-Insert bushings GN 992.5 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.
The dimensions match those of the construction tubes GN 990, but checking the tolerance position of the tube is recommended.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 14.22 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Ensat Expanded Slot Type, Model 302, Inch Type
KKV
[Features]
· Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
· The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
· If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
[Materials]
SUM22L free-cutting steel (equivalent), hexavalent chromate- Volume Discount
Configure nowStarting from∗ ： 0.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
C Lock (CL Type)【100 Pieces Per Package】
BOHSEI
The outer knurled form is reversed, which allows for high tensile strength and torque strength.Configure nowStarting from∗ ： 12.45 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Recoil-Free (UNC) SUS304
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.- Volume Discount
Configure nowStarting from∗ ： 1.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Brass Bit Insert (Standard, Both Faces) / HSB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingConfigure nowStarting from∗ ： 0.24 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 2.12 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Threaded inserts reinforced internal thread self-locking (07664)
NORELEM
· Enables tapped holes which have been damaged to be used again or repaired
· Suitable for use in various materials
· Quick and easy installation
· No other special tools are needed besides the assembly toolConfigure nowStarting from∗ ： 10.79 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For your own stock or for a large number of uses, buying per box is beneficial.- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Brass, Ensat, Screw Plastic Deformation, Type 305
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.- Volume Discount
Configure nowStarting from∗ ： 0.50 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Ensat, Chip-Free / Long, Type 338
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
Configure nowStarting from∗ ： 1.06 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Ensat, 3-Hole / Long Size, 308 Type, Stainless Steel
SUNCO
[Nominal M] 16
[Material] Stainless Steel
[Surface Processing] None- Volume Discount
- Stock
Configure nowStarting from∗ ： 19.82 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
![[Metric]Recoil Kit, M6 to 1.0 (Coarse)](//uk.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005804349.jpg?$product_view_b$)
[Metric]Recoil Kit, M6 to 1.0 (Coarse)
ESCO
【Product Specifications】
・Material-Stainless steel (SUS304)
・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
・Use a tap holder esparately
・Case dim.-195 x 85 x 30 (H)mm
・Dim.-M6-1.0 (coarse)
・No. of recoils-15 pcsConfigure nowStarting from∗ ： 108.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Configure nowStarting from∗ ： 1.41 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 0.96 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
![[Metric]Recoil Kit, M6 to 1.0 (Coarse)](http://uk.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005804349.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Application |
| Material |
| Screw Type |
| Screw Dia. M (after insertion)(mm) |
| Thread Dia. (After inserted), Unified(inch) |
| Length L (after insertion) (D = Thread Dia. M) |
| Notch |
| Shape |
| Sales Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | RECOIL | TOKAI METAL INDUSTRY | RECOIL | KKV | TOKAI METAL INDUSTRY | KKV | HIROSUGI-KEIKI | KIPP | MISUMI | KKV | HIROSUGI-KEIKI | HIROSUGI-KEIKI | KIPP | TOKAI METAL INDUSTRY | HIROSUGI-KEIKI | KIPP | KIPP | KKV | HIROSUGI-KEIKI | NORELEM | REYHER | KKV | JAPAN DRIVE-IT | GANTER | JAPAN DRIVE-IT | HIROSUGI-KEIKI | NORELEM | RECOIL | RECOIL | HIROSUGI-KEIKI | GANTER | KKV | BOHSEI | RECOIL | HIROSUGI-KEIKI | REYHER | NORELEM | MISUMI | KKV | KKV | SUNCO | ESCO | REYHER | REYHER |
| Product Series | Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】 | Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S | Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W | Threaded inserts reinforced internal thread self-locking (07664) | |||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Starting from∗ | 1.24 € *Unit price with basic configuration Volume Discount | 2.80 € *Unit price with basic configuration Volume Discount | 0.16 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 1.02 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 0.48 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 0.20 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 0.50 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 1.34 € *Unit price with basic configuration | 0.36 € *Unit price with basic configuration | 1.03 € *Unit price with basic configuration Volume Discount | 1.06 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 0.54 € *Unit price with basic configuration | 0.98 € *Unit price with basic configuration | 0.51 € *Unit price with basic configuration | 0.29 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 0.42 € *Unit price with basic configuration | 3.69 € *Unit price with basic configuration | 3.69 € *Unit price with basic configuration | 1.00 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 0.64 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 4.43 € *Unit price with basic configuration | 0.36 € *Unit price with basic configuration Volume Discount | 1.12 € *Unit price with basic configuration Volume Discount | 0.23 € *Unit price with basic configuration Volume Discount | 8.90 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 1.03 € *Unit price with basic configuration Volume Discount | 1.34 € *Unit price with basic configuration | 0.43 € *Unit price with basic configuration | 0.49 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 20.98 € *Unit price with basic configuration Volume Discount | 0.78 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 14.22 € *Unit price with basic configuration Volume Discount | 0.98 € *Unit price with basic configuration Volume Discount | 12.45 € *Unit price with basic configuration | 1.45 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 0.24 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 2.12 € *Unit price with basic configuration Volume Discount | 10.79 € *Unit price with basic configuration | 46.81 € *Unit price with basic configuration | 0.50 € *Unit price with basic configuration Volume Discount | 1.06 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 19.82 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 108.17 € *Unit price with basic configuration | 1.41 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 0.96 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 12 Days | 4 Days | Same day | Same day | 12 Days | 12 Days | 4 Days | Same day | 5 Days | 4 Days | 4 Days | Same day | Same day | 4 Days | 2 Days | Same day | Same day | Same day | Same day | 12 Days | 4 Days | Same day | 5 Days | Same day | 7 Days | 6 Days | Same day | Same day | Same day | 3 Days | 4 Days | 5 Days | Same day | Same day | Same day | 6 Days | Same day | 3 Days |
| Specifications |
|
|
|
| |||||||||||||||||||||||||||||||||||||||||
| Type | Self-Tapping | Standard | Standard | Standard | Self-Tapping | Standard | Self-Tapping | Self-Tapping | - | Standard | Self-Tapping | Press Fit | Self-Tapping | - | Standard | Press Fit | - | - | Self-Tapping | Self-Tapping | - | - | Self-Tapping | Press Fit | - | Self-Tapping | Self-Tapping | - | Standard | Standard | Self-Tapping | - | Self-Tapping | Press Fit | Standard | Press Fit | - | - | Standard | Self-Tapping | Self-Tapping | Self-Tapping | - | - | - |
| Application | Light Metal | Light Metal | Resin General | Light Metal | - | Resin General | - | Cast Iron | - | Light Metal | - | Light Metal | Cast Iron | - | Resin General | Light Metal | - | - | - | Light Metal | - | - | - | - | - | Resin General | Cast Iron | - | Light Metal | Light Metal / Cast Iron | Light Metal | - | - | Resin General | Light Metal | Light Metal | - | - | Light Metal | - | - | - | - | - | - |
| Material | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Nitrox 60 | Brass | Phosphor Bronze | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) / Brass | Brass | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Brass | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Steel / Stainless steel | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) | Brass | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Steel / Stainless steel | Brass | Brass | Steel / Stainless steel | Steel / Stainless steel | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) | Brass | Steel / Stainless steel | Steel / Brass | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) | Brass | - | Brass | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Steel / Stainless steel | Stainless (EN 1.4401 Equiv.) | Inconel X-750 | Brass | - | Steel | Brass | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Brass | - | Stainless steel | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Brass | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | - | - | - |
| Screw Type | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | - | - | Metric (Coarse) Thread | Metric (Coarse) Thread | - | - | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Unified (Coarse) Thread / Unified (Fine) Thread / BSW (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | - | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | - | - | - |
| Screw Dia. M (after insertion)(mm) | 3 ～ 12 | 3 ～ 12 | 1.6 ～ 8 | 3 ～ 24 | 2.5 ～ 30 | 2 ～ 10 | 3 ～ 16 | 2.6 ～ 8 | - | 3 ～ 16 | 3 ～ 12 | 3 ～ 8 | 2 ～ 8 | - | 2 ～ 8 | 2 ～ 5 | - | - | 3 ～ 16 | 2 ～ 8 | - | 3 ～ 12 | 3 ～ 16 | 2 ～ 10 | M 8 ～ M 16 | 3 ～ 8 | 2.6 ～ 8 | - | 3 ～ 16 | 3 ～ 12 | 2.6 ～ 8 | M 8 ～ M 16 | - | 2 ～ 6 | - | 1.4 ～ 5 | - | - | 3 ～ 8 | 3 ～ 6 | 3 ～ 16 | 16 | - | - | - |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2" ～ No. 10 | - | 1"-8 ～ #10-24 | - | - | - | - | - | - | - | - | - | - |
| Length L (after insertion) (D = Thread Dia. M) | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | - | 1D / 1.5D / 2D / 3D | - | 1.5D / 2D / 2.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D | - | - | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | - | - | - | 1D / 1.5D / 2D / 2.5D | - | 2D / 2.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | - | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D | - | - | 1D / 1.5D / 2D | - | - | - | - | - | - |
| Notch | Not Provided | Provided | Not Provided | Provided | - | Not Provided | - | Not Provided | - | Provided | - | Not Provided | Not Provided | - | Not Provided | Not Provided | - | - | - | Not Provided | - | - | - | Not Provided | - | Not Provided | Not Provided | - | Provided | Provided | Not Provided | - | Not Provided | - | Provided | Not Provided | - | - | Provided | - | - | Not Provided | - | - | - |
| Shape | Slotted | - | Standard | - | Slotted | Standard | Standard | Slotted | - | - | Tip Free Type | Standard | Standard | - | Standard | Standard | - | - | 3-Hole Type | Standard | - | - | 3-Hole Type | Standard | - | Standard | Standard | - | - | - | Slotted | - | Slotted | Standard | - | Standard | - | - | - | Standard | Tip Free Type | 3-Hole Type | - | - | - |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | - | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | - | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | - | - | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | - | - | - |
![[Metric]Recoil Kit, M6 to 1.0 (Coarse)](http://uk.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005804349.jpg?$product_view_c$)
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Application
-
Material
-
Screw Type
-
Screw Dia. M (after insertion)(mm)
-
Thread Dia. (After inserted), Unified(inch)
-
Length L (after insertion) (D = Thread Dia. M)
-
Notch
-
Shape
-
Sales Unit
Brand
CAD data type
-
- 2D
- 3D
Categories related to Thread Inserts
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.