HALDER Guide Elements
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Starting from∗ ： 303.47 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 330.12 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 198.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Clamping Angles, modular design
HALDER
The modular clamping angle is a unit consisting of a support plate and two base plates.Assembly or disassembly is possible within a very short time.The base plates used correspond to the respective standard version.- 3D CAD data available
Starting from∗ ： 8,176.67 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 44.31 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 530.26 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 953.91 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 96.92 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Step Jaws, for gripper studs
HALDER
Top face and side face, with thread for mounting of parallel jaws. Ground clamping surfaces. Additional threads for mounting the interchangeable jaws (Art. No. 1701.250-1701.280) on the high side. Suitable for mounting of gripper studs. First and second clamping operations, without adjustment. Mountings for click system (Art. No. 1701.190-1701.200) on the high side of the jaw
Attention:
These are rigid jaws which are only suitable for rectangular workpieces (saw cuts) - parallelism less or equal 0.5 mm (// <=0.5) and cylindrical workpieces - roundness less than or equal 0.5 (O <=0.5).- 3D CAD data available
Starting from∗ ： 440.89 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Seating Pins
HALDER
Five support heights. For levelling the workpiece on the guideway. Ground to high accuracy.- 3D CAD data available
Starting from∗ ： 70.22 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 65.82 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Base Plates, V70eco, overall dimensions same as pallets DIN 55201
HALDER
V70eco base plates are a further development of the established V70 product line, optimized in quality and price.
They are fully compatible with the existing V70 T-slot System.
• Centers to H6 tolerance and slots to H8 tolerance.
• Alignment of the base plate on the machine table by means of centers and/or centering slot.
• Fastening holes on a 100 mm pitch.
• High tensile tool steel.- 3D CAD data available
Starting from∗ ： 3,138.52 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 1,631.67 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 712.80 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 6,457.43 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Combination Clamping Bars
HALDER
The combination clamping bar offers 3 ways to clamp/support the workpiece:
Floating mode
Floating mode is used to clamp and support additional clamping points on components.
Centric mode
The jaws of the clamping bar move in sync. The centre axis of the workpiece remains unchanged even if the outer diameters are modified.
Machine vice mode
When this mode is selected, one of the jaws is locked in place on the clamping bar. The second jaw remains movable.Starting from∗ ： 1,374.06 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 102.65 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 256.71 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Floating Clamps, compact construction, separate clamping and locking M 12
HALDER
Floating clamps with separate clamp and locking are used to clamp and support
additional clamping points
on extremly pliable
workpieces. Both, clamping and supporting force can individually be designed.
The benefits of the floating clamp are:
avoids vibration during the processing. clamps ribs, beads and shackles to reinforce clamped components. distortion-free clamping of raw parts. compact version with reduced height.Starting from∗ ： 1,091.69 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 35.14 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Insertable Plates
HALDER
Three support heights. For levelling the workpiece on the five-sided machining jaws. Ground to high accuracy. Supplied without M 6 x 8 mm mounting screws (Art. No. 1704.600). This product is supplied as a pair.- 3D CAD data available
Starting from∗ ： 176.88 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Jaws, ribbed | 1701.250
HALDER
Standard jaws with small surface area. In order to increase specific surface pressure. Please order mounting screws separately (Art. No. 1701.300). Supplied as a pair.Starting from∗ ： 265.39 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 42.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Master Jaw Adapters
HALDER
High side of the jaw is hardened. Additional thread for mounting the interchangeable jaws (Art. No. 1701.250 - 1701.280). Ground clamping surfaces. Mountings for click system (Art. No. 1701.190 -1701.200) on the high side of the jaw.- 3D CAD data available
Starting from∗ ： 445.28 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 280.97 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Step Jaws
HALDER
Top face and side face, with thread for mounting of parallel jaws. Ground clamping surfaces. Additional threads for parallels and for mounting the interchangeable jaws (Art. No. 1701.250-1701.280) on the smooth side. Mountings for click system (Art. No. 1701.190-1701.200) on both sides of the jaw.- 3D CAD data available
Starting from∗ ： 360.93 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Multi-Vices, MS 125
HALDER
Scope of application:
Can be applied horizontally and vertically - therefore suitable for vertical and horizontal CNC milling machines. Conventional clamping, gripper clamping or pull-down clamping are all possible. MS 125-S - ideal for use on five-axis machining centres. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece. With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely and economically.
Product features:
High versatility - the modular clamping system combines practically all the possibilities of our tried-and-tested models. High-pressure spindle with power intensification - clamping force does not slacken. Enlarged clamping span for secure clamping of unmachined parts. Lost clamping margin 8 mm with pull-down clamping, 3 mm with gripp clamping. Clamping with torque wrench (max. 30 Nm) - this makes it possible to work above the table with an unfavourable clamping arrangement on the tool.
Scope of supply:
1 high-pressure vice without jaws. 1 set of side clamps. 3 socket screw wrenches. Hexagonal insert for torque wrench 3/8"
Please order the clamping jaws separately.- 3D CAD data available
Starting from∗ ： 2,749.75 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Multi-Vices, MS 125eco
HALDER
The all-round clamping system is a classic for conventional clamping and gripp clamping. It is suitable for all common milling. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece.
The MS 125eco is designed for fast machining of unmachined/semi-finished parts as well as of finished products. It is equally suitable for gripp clamping in the first clamping as well as for conventional clamping in the second clamping without refitting. ground jaws for high precision in the machining of workpieces. high-pressure spindle with mechanical power intensifier (operation with torque wrench). up to 40 kN clamping force (linearly increasing, at max. 30 Nm). solid base made of GGG 60, top and bottom surface ground. threats M8 on both sides for workpiece stop. precise alignment slots in the ground bottom surface for an optimal alignment on the machine table
Scope of supply:
1 piece MS 125eco. 1 set step jaws for gripper studs. 4 pieces gripper studs, pointed. 4 pieces clamping elements. 3 pieces wrenches
All components of the product ranges "conventional clamping" and "gripp clamping" as well as the accessories for the Multi-Vice MS 125 are fully compatible to MS 125eco. For horizontal machining Halder basic elements (angles/cubes) can be used.Starting from∗ ： 2,340.67 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 15.03 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Min. Shipping Days ： 3 Days -
Min. Shipping Days ： 3 Days -
Starting from∗ ： 55.50 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 436.23 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Wedge Adapters, high
HALDER
Height wedge adapter for use on support jaws. For mounting wedge adapters 4-point (Art. No. 1703.340), Microgripper (Art. No. 1703.350), coated (Art. No. 1703.360) and round (Art. No. 1703.380).. Please order the mounting screw separately.Starting from∗ ： 105.34 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 64.30 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
Starting from∗ ： 737.44 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Aligning and Fixing Sets
HALDER
For aligning (positioning) and fastening the vice on the machine table.
Size according to T-slot or thread in the machine table.Starting from∗ ： 179.77 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Base Jaws, hard
HALDER
One side smooth and ground, one side serrated. Additional threads for parallels and for mounting the interchangeable jaws (Art. No. 1701.250-1701.280) on the smooth side. Mountings for click system (Art. No. 1701.190-1701.200) on both sides of the jaw.- 3D CAD data available
Starting from∗ ： 407.32 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Base Jaws, soft
HALDER
Jaws of case hardened steel. For self-made special jaws. Please order mounting screws separately (Art. No. 1701.300). This product is supplied as a pair.Starting from∗ ： 410.09 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 911.68 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Base Plates, V70eco
HALDER
V70eco base plates are a further development of the established V70 product line, optimized in quality and price.
They are fully compatible with the existing V70 T-slot System.
• Centers to H6 tolerance and slots to H8 tolerance.
• Alignment of the base plate on the machine table by means of centers and/or centering slot.
• Fastening holes on a 100 mm pitch.
• High tensile tool steel.- 3D CAD data available
Starting from∗ ： 2,130.63 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 1,419.30 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 2,646.60 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 2,742.37 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 317.55 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER |
| Product Series | Base Plates, V70eco, overall dimensions same as pallets DIN 55201 | Floating Clamps, compact construction, separate clamping and locking M 12 | |||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||
| Starting from∗ | 303.47 € *Unit price with basic configuration | 330.12 € *Unit price with basic configuration | 198.00 € *Unit price with basic configuration | 8,176.67 € *Unit price with basic configuration | 44.31 € *Unit price with basic configuration | 530.26 € *Unit price with basic configuration | 953.91 € *Unit price with basic configuration | 96.92 € *Unit price with basic configuration | 440.89 € *Unit price with basic configuration | 70.22 € *Unit price with basic configuration | 65.82 € *Unit price with basic configuration | 3,138.52 € *Unit price with basic configuration | 1,631.67 € *Unit price with basic configuration | 712.80 € *Unit price with basic configuration | 6,457.43 € *Unit price with basic configuration | 1,374.06 € *Unit price with basic configuration | 102.65 € *Unit price with basic configuration | 256.71 € *Unit price with basic configuration | 1,091.69 € *Unit price with basic configuration | 35.14 € *Unit price with basic configuration | 176.88 € *Unit price with basic configuration | 265.39 € *Unit price with basic configuration | 42.30 € *Unit price with basic configuration | 445.28 € *Unit price with basic configuration | 280.97 € *Unit price with basic configuration | 360.93 € *Unit price with basic configuration | 2,749.75 € *Unit price with basic configuration | 2,340.67 € *Unit price with basic configuration | 15.03 € *Unit price with basic configuration | - | - | 55.50 € *Unit price with basic configuration | 436.23 € *Unit price with basic configuration | 105.34 € *Unit price with basic configuration | 64.30 € *Unit price with basic configuration | 737.44 € *Unit price with basic configuration | 179.77 € *Unit price with basic configuration | 407.32 € *Unit price with basic configuration | 410.09 € *Unit price with basic configuration | 911.68 € *Unit price with basic configuration | 2,130.63 € *Unit price with basic configuration | 1,419.30 € *Unit price with basic configuration | 2,646.60 € *Unit price with basic configuration | 2,742.37 € *Unit price with basic configuration | 317.55 € *Unit price with basic configuration |
| Min. Shipping Days ： | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | Same day | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | Same day | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 1 Day | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days |
Loading...
Categories related to Guide Elements
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.