Confirmed
- Material
- Steel
- EN-JM 1010 Equiv.
- Screw Nominal T1
- Applicable Fluid
- Surface Treatment
- Type
- CAD
- 2D
- 3D
- Est. shipping days
- All
- Within 5 working days
Low Pressure Fittings / Union (SGPPU8A)
Outline drawing and specifications table
Dimensional Drawing
 |  |
| Type | [M] Material | [S] Surface Treatment | Accessory |
| SGPPU | EN-JM 1010 Equiv. | Hot Zinc Plating | Gasket (1 pc.) |
| SUTPU | EN 1.4308 Equiv. | — |
Specification Table
| Part Number |
| SGPPU10A |
| Part Number | Rc (PT) | SGPPU | SUTPU | |||||||
| Type | No. | B1 | (L) | (A) | B | B1 | (L) | (A) | B | |
| SGPPU SUTPU | 6 A | 1/8 | 15 | 30 | 13 | 25 | 14 | 30 | 13 | 25 |
| 8 A | 1/4 | 19 | 33.5 | 13.5 | 31 | 18 | 33.5 | 13.5 | 31 | |
| 10 A | 3/8 | 23 | 38 | 16 | 37 | 22 | 37.5 | 16 | 37 | |
| 15 A | 1/2 | 27 | 41 | 17 | 42 | 26 | 40.5 | 17 | 42 | |
| 20 A | 3/4 | 33 | 51 | 18.5 | 49 | 32 | 42.5 | 17 | 50 | |
| 25 A | 1 | 41 | 54 | 20 | 59 | 41 | 51 | 20 | 59 | |
Included gasket dimensions
Included gasket dimensions
* Single gaskets for SUTPU are not available as standard.
| Type | Nominal Dia. | I.D. (ød) | O.D. (⌀D) | Thickness (t) | Material | |
| A | Rc | |||||
| SGPPU | 6 A | 1/8 | 13.0 | 18.7 | 1.5 | NBR, aramid fiber, inorganic filler (TOMBO No.1995) |
| 8 A | 1/4 | 17.0 | 23.0 | |||
| 10 A | 3/8 | 21.0 | 28.0 | |||
| 15 A | 1/2 | 25.0 | 32.0 | |||
| 20 A | 3/4 | 31.0 | 39.0 | |||
| 25 A | 1 | 39.0 | 48.0 | |||
Included gasket dimensions
| Type | Nominal Dia. | I.D. (ød) | O.D. (⌀D) | Thickness (t) | Material | |
| A | Rc | |||||
| SUTPU | 6 A | 1/8 | 13.0 | 19.0 | 1.5 | Graphite, aramid fiber, organic binder (Pillar No.5650) |
| 8 A | 1/4 | 17.0 | 24.5 | |||
| 10 A | 3/8 | 20.5 | 28.5 | |||
| 15 A | 1/2 | 24.5 | 32.5 | |||
| 20 A | 3/4 | 30.5 | 39.5 | |||
| 25 A | 1 | 39.0 | 48.0 | |||
More Information
Basic information
[Type of connection] Thread to thread, same diameter / same type; Type of connection: Screw connection; Material/Surface treatment: EN-JM 1010 Equiv. with hot dip galvanising, or EN 1.4308 Equiv. without treatment.
Outline and specifications
Specifications/Overview
■ Features
These fittings can be removed by loosening the nuts, and thus, require no twist of pipes themselves.
These fittings can be removed by loosening the nuts, and thus, require no twist of pipes themselves.
Operating Conditions of Fittings
* Pulsating Water is a stream of water that is generated under steady operating conditions and varies in pressure and flow rate on a cycle basis. (Except for transitional change)
* Static Flow Water is a non-pulsating stream of water.
* As fittings are cast products, () dimensions such as (D) and (T) are for reference, not guaranteed.
| Fluid State | Max. Operating Pressure Mpa |
| Steam, Air, Gas, Oil: Up to 300°C | 1.0 |
| Steam, Air, Oil, Pulsating Water: Up to 200°C | 1.4 |
| Static Flow Water: Up to 120°C | 2.0 |
* Static Flow Water is a non-pulsating stream of water.
* As fittings are cast products, () dimensions such as (D) and (T) are for reference, not guaranteed.
Catalog
Loading...
Part number has been confirmed