Locks
Part number:
possible part numbers found.Outline drawing and specifications table
Dimensional Drawing
S: Moving range of special nut
7 ≤ S ≤ 25
HFLOCK7 ≤ S ≤ 25
[ ! ] To lock (1), insert a key into A and rotate 180 degrees counterclockwise.
[ ! ] When (1) is raised, (2) is retracted.
[ ! ] Cannot be used for sliding doors.
[M]Material: EN AC-46100 Equiv.
Specification Table
| Part Number |
| HFLOCK5 |
| Part Number | Applicable Extrusion (Series) | Accessory | ||||||
| Type | No. | Screw | Nut | Key | ||||
| HFLOCK | 5 | 5 Series | CBM6−20 | 4 pcs. | Dedicated M6 Nut | 4 pcs. | Key | 2 pcs. |
| 6 | 6 Series | CBM6−30 | ||||||
| 8 | 8 Series | CBM6−35 | ||||||
| 8−45 | 8−45 Series | CBM6−40 | ||||||
App. Example
·Extrusion Installation Example
|  HFS6―3030―500―Z6―XA200―XB256 |
 Recommended extrusion gap: 2 mm |
Alteration examples of counterbore machining on extrusions for HFLOCK mounting
HFLOCK is a lock for aluminum extrusions. The lock is mounted on the counterbored extrusion using the included screws, as shown on the Alteration Examples above
.
| Extrusion Square | Alternation Instruction | Quantity |
| 20 | HFS5－2020－500－Z6－XA200－XB256 | 2 |
| 30 | HFS6－3030－500－Z6－XA200－XB256 | 2 |
| 40 | HFS8－4040－500－Z6－XA200－XB256 | 2 |
| 45 | HFS8－4545－500－Z6－XA200－XB256 | 2 |
.
More Information
Basic information
Catalog
Loading...