Configure

Overall Length L(mm)
[50-4000/0.5mm units]
Type
- HFSR5-404020
CAD
- 2D
- 3D
Est. shipping days
- All
- Within 5 working days

Additional options

High Precision Cut
- L Dimension Tolerance ±0.2 [SC]
L Hole Machining [JLP](Machining of L Holes Crisscross on Top Section (Pitch Configurable))(mm)
[12-3982/1mm units]
L Hole Machining [JLP](Machining of L Holes Crisscross on Bottom Section (Pitch Configurable))(mm)
[12-3982/1mm units]
Number of Holes [H](pc(s).)
- 2
- 3
- 4
- 5
End Plate Mounting Hole Machining
Tapped Holes on End Faces
Unit Number [U](Unit Number of 3 Digits or Less Beginning with -U)
[0-999/1]
Fine Chamfering on Both End Faces (C0.2-0.3)
- CW

MISUMI

5 Series / slot width 6 / 40x40x20mm

CatalogP.2-532

Part number:

HFSR5-404020-[50-4000/0.5]

Clear

Outline drawing and specifications table
Part number list
More Information
Catalog

Outline drawing and specifications table

Dimensional Drawing

Specification Table

Alterations

Dimensional Drawing

HFS (Standard Type)
5 Series, Square, 20 × 20 mm, 1 Slot, 2-Side Slots: Related Image

5 Series

Slot Details
(Common to All Series)

Slot Bottom Details
(HFS, CAF, HFSY Series)

(NFS, NFSB, NFSF, NFST Series)

Enlarged View of A

[ ! ] Cut surface and altered parts are not surface treated.
[ ! ] When tapped hole alterations are specified, the red circles on the outline drawing of the aluminum extrusion will be machined.

■The 5 Series
is an aluminum extrusion with a 6 mm slot width. Applicable to M5 bolts.

Configurable Length Extrusion Specification Table

Part Number	—	L
HFSR5−404020	—	800

Type	Material	Surface Treatment	Part Number	L 0.5 mm Increments	Mass kg/m	Sectional Area mm²	Cross Sectional Moment of Inertia mm⁴
							ℓx	ℓy
HFS	EN AW-6061-T5 Equiv.	Clear Anodize	HFSR5－404020	50 to 4000	1.13	419	5.95 × 10⁴	5.95 × 10⁴

[ ! ] Extrusions without anodizing are also available.
[ ! ] Applicable to 6,000 mm depending on products.
[ ! ] Not applicable to some extrusions.

Alterations

[ ! ] MISUMI configurable length aluminum extrusion product can be utilized for structure building with highly enhanced design flexibility when the following various alteration options are applied.
Some alterations are not applicable depending on types and sizes.

Type	Alterations	Alteration Codes	Contents
> End Tapping	End Tapping (Center Hole)	LTP/RTP/TPW LHP/RHP/HPW	Adds tapped holes on extrusion ends. Blind Joints which require this alteration (Screw Joint / Simple Joint)
> End Tapping	End Tapping (4 Side Holes)	LSP/RSP/SPW	Adds tapped holes on extrusion corner ends.
> Cutting Method Change	High Precision Cut	SC	Applies High Precision Cut with an overall length tolerance of L±0.2 (Standard = L±0.5). * Only applicable to L ≤ 1,500
> Cutting Method Change	45-Degree Cut	L□T45/R□T45	Cuts with 45-degree angle.
> Drill Wrench Hole	Wrench Hole in Fixed Position	LWP/RWP	Wrench access hole(s) for Blind Joints are drilled. The hole location will be aligned with the mating extrusion’s tapped hole location. Blind Joints which require this alteration (Screw Joint / Single Joint / Tapping Joint)
	Extrusion End Cap The hole position moves by thickness	FL/FR	Offsets the wrench access hole for the thickness of Extrusion End Cap (3 mm). The extrusion end cap will be flat with the adjacent extrusion surface.
	Wrench Hole in Specified Position	AH/BH/AV/BV	Adds a wrench hole in a desired position from the left end. Use for Blind Jointing in beam sections, etc.
> Counterboring	Counterbores in Specified Position	Z6/XA100	Adds a counterbored hole in a desired position from the left end. Can be used for connecting extrusions or installing tables, etc.
> Blind Joints Dedicated Holes	D Hole	LDH/RDH	Adds required holes for Single Joint connections. (Single Joints)
	S Hole	LSH	Adds required holes for Pre-Assembly. Insertion Double Joint connections. (Pre-Assembly Insertion Double Joints)
	M Hole	LMH	Adds required holes for Post-Assembly Insertion Double Joints, Center Joint connections. (Post-Assembly Insertion Double Joint / Center Joint)
	L Hole	JLP	Adds required holes for Parallel Joint connections. (Parallel Joints)
> Other Machining	HFSR End Tapping	LTS/RTS/TSW	Necessary alteration to use Ends Protection Plates for HFSR series.
	End Face C Chamfering	CW	Adds C Chamfering on extrusion ends.
	Labeling	ZZZ	Adds a sticker with catalog No. etc. on the aluminum extrusions. Although number of characters are limited, customer's own serial number or unit number can be labeled.