Register
Category
See more
Configure

Clear all

  • Stock
  • R Size(mm)
  • Type
  • work material
  • Blade length (ℓ)(mm)
    [5-30/1mm units]
  • Number of flutes(sheet)
  • Coating
  • Brand

    • Carbide Ball End Mills (Coating: For High Hardness (Silicon Group))

    34 items
    * Information on days to ship, shipping costs and prices
    List
    Photo
    Compare specifications
  • 1
    • HSB, HM Coated 2-Flute Ball
      • DISCOUNTED
      • Volume Discount
      • Stock

      UNION TOOL

      HSB, HM Coated 2-Flute Ball

      [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.03 ～ 6BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]0.06 ～ 222For High Hardness (Silicon Group)50 ～ 110-4 ～ 12
      Regular price (excluding VAT):
      37.04 €～
      Regular price (excluding VAT):
      Special price
      Standard shipping days:
      Stock item: 1 working day
      Some items can be shipped the same day
      Configure now
    • MSBH230 2-Flute Ball-End Mill for High-Hardness
      • Volume Discount
      • Stock

      NS TOOL

      MSBH230 2-Flute Ball-End Mill for High-Hardness

      Standard type ball end mill for high hardness. Ideal for finishing
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.05 ～ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]0.1 ～ 202For High Hardness (Silicon Group)50 ～ 100-4 ～ 12
      Regular price (excluding VAT):
      31.61 €～
      Standard shipping days:
      Stock item: 1 working day
      Some items can be shipped the same day
      Configure now
    • TSC series carbide ball end mill (R accuracy ±3μm)
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide ball end mill (R accuracy ±3μm)

      [Features] -Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1.5 ～ 3BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 92For High Hardness (Silicon Group)60 ～ 90-6
      Regular price (excluding VAT):
      46.74 €～
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

      [Features] -Designed with optimum blade length, shank length and overall length considering processing with shrink fit holder-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. High-precision tools with low quality variation are ideal for high-precision 3D machining of moulds-Sampless shape (sharpening from the outer edge to the centre of the rounded blade in one process) is designed to produce a smooth cutting edge without steps.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.3 ～ 2BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.6 ～ 42For High Hardness (Silicon Group)40-6
      Regular price (excluding VAT):
      64.20 €～
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

      [Features] -Compatible with shrink fit chucks for high precision machining-Designed with short flute length and overall length for shrink fit and emphasis on rigidityIt has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.2 ～ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.4 ～ 122For High Hardness (Silicon Group)40 ～ 65-4 ～ 12
      Regular price (excluding VAT):
      24.07 €～
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide ball end mill, short model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide ball end mill, short model

      [Features] -Good surface finish can be expected for the rough surface of the workpiece after machiningIt has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.05 ～ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.2 ～ 252For High Hardness (Silicon Group)40 ～ 15015 ～ 753 ～ 20
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide ball end mill, regular model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide ball end mill, regular model

      [Features] -Regular bridge length allows for many regrinding times-Can be regrinded. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.2 ～ 8BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ～ 302For High Hardness (Silicon Group)50 ～ 14017 ～ 804 ～ 16
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide ball end mill, 2-flute / short, long shank model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide ball end mill, 2-flute / short, long shank model

      [Features] -Long shank, ideal for deep cavity millingIt has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 12.5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ～ 302For High Hardness (Silicon Group)70 ～ 28015 ～ 803 ～ 25
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

      A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 5Long-Neck Ball / Spherical BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-2For High Hardness (Silicon Group)70 ～ 904 ～ 556 ～ 10
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide ball end mill, 3-flute / short model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide ball end mill, 3-flute / short model

      [Features] -The 3-edge shape is resistant to chattering and enables high feed rate-The surface of the workpiece is very well finished after machining.-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ～ 253For High Hardness (Silicon Group)50 ～ 15015 ～ 756 ～ 20
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide ball end mill, 3-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide ball end mill, 3-flute / regular model

      [Features] -The 3-edge shape is chatter resistant and enables high feed-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1 ～ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 223For High Hardness (Silicon Group)50 ～ 11017 ～ 726 ～ 12
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide ball end mill, short model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide ball end mill, short model

      [Features] -The surface of the workpiece is very good after machining.-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1 ～ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 254For High Hardness (Silicon Group)50 ～ 15015 ～ 756 ～ 20
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide ball end mill, 4-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide ball end mill, 4-flute / regular model

      [Features] -The surface of the workpiece is very good after machining.-It has coating with high oxidation resistance and high hardness, and achieves long service life. As a coating property, it is effective in high-speed machining and dry machining.-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1.5 ～ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 224For High Hardness (Silicon Group)60 ～ 11017 ～ 726 ～ 12
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

      [Features] -High rigidity, 2 flute type with longitudinal taper-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.15 ～ 5Tapered neck ballGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.3 ～ 82For High Hardness (Silicon Group)50 ～ 1101.5 ～ 604 ～ 12
      Regular price (excluding VAT):
      34.83 €～
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes

      MISUMI

      TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

      [Features] -High feed, high rigidity 3-spiral taper shape with taper length-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 3Tapered neck ballGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ～ 63For High Hardness (Silicon Group)50 ～ 1107 ～ 604 ～ 8
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide long neck ball end mill, 2-flute / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide long neck ball end mill, 2-flute / long neck model

      [Features] -Long neck shape suitable for deep cavity milling-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.05 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.07 ～ 82For High Hardness (Silicon Group)40 ～ 1100.2 ～ 603 ～ 8
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide long neck ball end mill, 3-flute / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes

      MISUMI

      TSC series carbide long neck ball end mill, 3-flute / long neck model

      [Features] -Long-neck ball with 3 cutting edges, suitable for high-speed machining of deep cutting areas-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ～ 4.82 ～ 3For High Hardness (Silicon Group)50 ～ 1103 ～ 504 ～ 6
      Standard shipping days:
      5 working days
      Configure now
    • TSC series carbide long neck ball end mill, 4-flute / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes

      MISUMI

      TSC series carbide long neck ball end mill, 4-flute / long neck model

      [Features] -Long Neck Ball 4-Flute type suitable for high-feed machining of deep cutting areas-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.6 ～ 64For High Hardness (Silicon Group)50 ～ 704 ～ 304 ～ 6
      Standard shipping days:
      5 working days
      Configure now
    • TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 2 Flutes

      MISUMI

      TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

      [Features] -Ultra-fine-grained carbide base material suitable for machining high hardness steels is used (according to the manufacturer's cutting test results).-MIAutomatic steelI-Original shape with rigid cutting edge treatment and no side cutting edge. High strength of the tool and cutting edge, resulting in a stable cutting edge shape and long tool life in high-speed milling-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1 ～ 5BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]1 ～ 52For High Hardness (Silicon Group)50 ～ 905 ～ 106 ～ 10
      Regular price (excluding VAT):
      113.26 €～
      Standard shipping days:
      5 working days
      Configure now
    • TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

      The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.3 ～ 3BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]0.6 ～ 62For High Hardness (Silicon Group)40-6
      Regular price (excluding VAT):
      64.27 €～
      Standard shipping days:
      5 working days
      Configure now
    • TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes

      MISUMI

      TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

      [Features] The shape with 3 flutes and short flute length prevents chatter and enables high feed machiningThe tapered neck effectively suppresses chatterMachining of high hardness steel up to 65HRC is possibleThe coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, pricing, etc.
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 3Tapered neck ballGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]0.8 ～ 4.83For High Hardness (Silicon Group)70 ～ 11020 ～ 504 ～ 8
      Regular price (excluding VAT):
      71.52 €～
      Standard shipping days:
      5 working days
      Configure now
    • TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model
      • Volume Discount
      • TS
      • SUS
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model

      Blade shape ball end mill that's suitable for work materials with low thermal conductivity such as the hard-to-cut SUS
      Read more
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1 ～ 5BallGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○]3 ～ 152For High Hardness (Silicon Group)50 ～ 100-6 ～ 10
      Regular price (excluding VAT):
      103.49 €～
      Standard shipping days:
      5 working days
      Configure now
    • 2-Flute, Ball End, WXS-EBD

        OSG

        2-Flute, Ball End, WXS-EBD

        High-precision ball end mill that was subjected to a WX super coat of super-hard and ultra-heat. High-speed machining of general steel, of course, but even suitable for high speed direct carving machining of hardened steel.
        Read more
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.75 ～ 2BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]1.5 ～ 42For High Hardness (Silicon Group)50 ～ 603 ～ 84
        Regular price (excluding VAT):
        30.41 €～
        Standard shipping days:
        6 working days
        Configure now
      • 3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT

          OSG

          3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT

          Overturns old notions of deep engraving work with improved high efficiency machining. Unique spiral ball blade prevents vibrations during deep engraving and allows stable high feed cutting.
          Read more
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5 ～ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○]1.5 ～ 183For High Hardness (Silicon Group)60 ～ 2206 ～ 160.86 ～ 20
          Regular price (excluding VAT):
          83.42 €～
          Standard shipping days:
          6 working days
          Configure now
        • 2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD
          • DISCOUNTED
          • Volume Discount

          OSG

          2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD

          Long neck ball which has been subjected to WX super coat of super-hard and ultra-heat-resistant. In accordance with the processing shape, freely effective length can be selected.
          Read more
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.1 ～ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]0.16 ～ 4.82For High Hardness (Silicon Group)45 ～ 900.5 ～ 404 ～ 6
          Regular price (excluding VAT):
          57.40 €～
          Regular price (excluding VAT):
          Special price
          Standard shipping days:
          Stock item: 1 working day
          Some items can be shipped the same day
          Configure now
        • HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)
          • Volume Discount

          UNION TOOL

          HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)

          [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
          Read more
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.1 ～ 0.75BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.3 ～ 2.52For High Hardness (Silicon Group)50-4
          Regular price (excluding VAT):
          43.34 €～
          Standard shipping days:
          8 working days
          Configure now
        • HBL, HM Coated 2-Flute Long Shank Ball

            UNION TOOL

            HBL, HM Coated 2-Flute Long Shank Ball

            [Features]· Long Shank Ball End Middle Series Supporting High-Hardness Materials· Uses HardMax coating compatible with high-speed machining of high-hardness materials· Capable of stable, long-life machining for both dry and wet type
            Read more
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            1.5 ～ 6BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]4.5 ～ 252For High Hardness (Silicon Group)80 ～ 200-3 ～ 12
            Regular price (excluding VAT):
            110.99 €～
            Standard shipping days:
            6 working days
            Configure now
          • HLB, HM Coated 2-Flute Long Neck Ball

              UNION TOOL

              HLB, HM Coated 2-Flute Long Neck Ball

              [Features]· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity· Provides unprecedented long life and can be used for both dry and wet applications
              Read more
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.4 ～ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.64 ～ 4.82For High Hardness (Silicon Group)45 ～ 803 ～ 304 ～ 6
              Regular price (excluding VAT):
              48.19 €～
              Standard shipping days:
              7 working days
              Configure now
            • HTNB HM Coated High-Precision Taper Neck Ball
              • DISCOUNTED

              UNION TOOL

              HTNB HM Coated High-Precision Taper Neck Ball

              [Features]· High rigidity realized through an improved taper neck shape.· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity· 65 HRC high hardness materials can also be cut
              Read more
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.1 ～ 2Tapered neck ballGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.16 ～ 3.22For High Hardness (Silicon Group)50 ～ 1201.5 ～ 624 ～ 6
              Regular price (excluding VAT):
              69.30 €～
              Regular price (excluding VAT):
              Special price
              Standard shipping days:
              Stock item: 1 working day
              Some items can be shipped the same day
              Configure now
            • MRBH230 Long-Neck Ball, Hard (for High Hardness)
              • DISCOUNTED
              • Volume Discount
              • Stock

              NS TOOL

              MRBH230 Long-Neck Ball, Hard (for High Hardness)

              The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface
              Read more
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.05 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]0.07 ～ 62For High Hardness (Silicon Group)45 ～ 1200.2 ～ 504 ～ 6
              Regular price (excluding VAT):
              32.56 €～
              Regular price (excluding VAT):
              Special price
              Standard shipping days:
              Stock item: 1 working day
              Some items can be shipped the same day
              Configure now
            • MSBH345 3-Flute Ball-End Mill for High-Hardness
              • Volume Discount

              NS TOOL

              MSBH345 3-Flute Ball-End Mill for High-Hardness

              Enables high-efficiency machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution
              Read more
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.5 ～ 3BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]1.5 ～ 103For High Hardness (Silicon Group)60 ～ 80-6
              Regular price (excluding VAT):
              96.47 €～
              Standard shipping days:
              6 working days
              Configure now
            • HM Coated 2-Flute, Long Neck Ball HSLB
              • DISCOUNTED
              • Volume Discount
              • Stock

              UNION TOOL

              HM Coated 2-Flute, Long Neck Ball HSLB

              [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
              Read more
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.05 ～ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]0.08 ～ 4.82For High Hardness (Silicon Group)45 ～ 1200.3 ～ 603 ～ 6
              Regular price (excluding VAT):
              28.03 €～
              Regular price (excluding VAT):
              Special price
              Standard shipping days:
              Stock item: 1 working day
              Some items can be shipped the same day
              Configure now
            • Carbide Long Neck Ball Series WXS Coat 3-Flute Long Neck
              • Volume Discount

              OSG

              Carbide Long Neck Ball Series WXS Coat 3-Flute Long Neck

              A long neck ball nose cutter with WXS coating.A corner radius shape that achieves both cutting force and cutting edge rigidity.Peripheral cutting edge and undercutting specifications to suppress chatter vibration.A special edge line prevents interference.Optimum chip groove for excellent chip evacuation.
              Read more
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.5 ～ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○]0.75 ～ 4.53For High Hardness (Silicon Group)50 ～ 704 ～ 304 ～ 6
              Regular price (excluding VAT):
              62.70 €～
              Standard shipping days:
              6 working days
              Configure now
            • SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated
              • Volume Discount

              OKAZAKI SEIKO

              SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated

              Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.
              Read more
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              1 ～ 12.5BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]2 ～ 602For High Hardness (Silicon Group)80 ～ 23014 ～ 216 ～ 25
              Regular price (excluding VAT):
              101.35 €～
              Standard shipping days:
              10 working days
              Configure now
          • 1

            • Categories related to Carbide Ball End Mills