Pillow Type

?* Information on days to ship and prices

• 

  Pillow Blocks / Cast Housing / Economy

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.07 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Diamond Shape Flanged

  MISUMI

  [Features] This is a lubrication-free twin-bolt flanged ball bearing unit.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.28 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pillow Blocks

  MISUMI

  [Features] This is a lubrication-free pillow block bearing unit. There are 2 types available: the fixed set screw type and the eccentric ring type.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.28 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pillow Blocks / Cast Iron

  MISUMI

  This is one of the most typical ball bearing units, and a bearing is built into the robust and integrally structured housing.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.47 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pillow Unit with Set Screws, Cylindrical Hole Shape, UCP

  ASAHI SEIKO

  Standard model number. Bearing box with a sturdy integrated structure and inserted bearing. Used with a wide range of transmission equipment. Cast iron series
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  • Volume Discount

  • Stock

  Select to compare

  › Configure now
  Starting from∗ ：	13.46 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SKF Pillow Block Housing, Gray Cast Iron, Long Base, Type SNL

  SKF

  Select to compare

  › Configure now
  Starting from∗ ：	128.22 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SKF Pillow Block Unit, Gray Cast Iron, Long Base, Type SY / SYJ

  SKF

  Select to compare

  › Configure now
  Starting from∗ ：	13.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cast Iron Pillow

  NTN

  One of the standard formats for bearing units, this product is equivalent to the combination of a plummer block and a self-aligning ball bearing. Can be mounted to the shaft by just tightening a ball screw, and is used frequently in transmission equipment and general machinery.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.17 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Diamond Shape Flanged / Cast Iron

  MISUMI

  [It is mounted on a vertical surface, such as the side of a machine. The compact type is lighter and has a more compact design than the standard type.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.51 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cast Iron Pillow-Type Unit UCP

  NIPPON PILLOW BLOCK

  [Features] One of the most representative models of storage units. Unit type: Plug-in bearing unit

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.60 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel Pillow

  NTN

  A stainless steel bearing unit filled with food machine grease, with high corrosion resistance and dust-proof properties.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	86.77 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Square Flanged / Cast Iron

  MISUMI

  [It is attached to a vertical surface, e.g. the side of a machine. There is a choice of lubricated or non-lubricated types.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	14.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Plummer Block

  NTN

  This plummer block is a bearing box for either automatic spherical roller bearings or self-aligning ball bearings. Embedded with a felt seal, rubber seal, or labyrinth seal as sealing equipment, and corresponds to either grease or oil lubricant for its lubrication method.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	94.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TIMKEN Pillow Block Units with Spherical Roller Bearings

  TIMKEN

  Select to compare

  › Configure now
  Starting from∗ ：	238.51 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pillow Blocks / Sheet Metal Housing / Side Mount

  MISUMI

  [Features] This is a low cost ball bearing unit (pillow block) combining 2 pressed steel plates.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.30 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Bottom Mount / Cast Iron

  MISUMI

  [Features] This is a bottom-mounted (cast) ball bearing unit that can be lubricated.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	15.77 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Plummer Block SN500

  TOHO

  The SN shape (standard shape) is a standard format specified by JIS, ISO, and DIN, and is the most widely used type both inside and outside of Japan.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	141.84 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Plummer block housing units

  SNR

  Select to compare

  › Configure now
  Min. Shipping Days ：	4 Days

• 

  SKF Concentra Pillow Block Unit for Roller Bearings, Floating Bearings

  SKF

  Select to compare

  › Configure now
  Starting from∗ ：	215.68 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cast Iron High Center Pillow Unit UCHP

  NTN

  A high center pillow unit optimal for when the shaft center is a long distance from the base.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	20.97 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cast Iron Pillow Unit UCPH

  NIPPON PILLOW BLOCK

  Designed as a high-center pillow unit with high strength to shock loads.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	22.41 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cast Iron Diamond-Flanged Unit UCFL

  NIPPON PILLOW BLOCK

  Bearing unit combining a bearing and a housing with a 2-screw flange
  .

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, UP

  ASAHI SEIKO

  [Features]
  · Smaller and more lightweight than conventional insert bearing units.
  · Also, the bearing box is marked with a center mark for easy positioning.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	13.88 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SKF Concentra Pillow Block Unit for Roller Bearings, Locating Bearings

  SKF

  Select to compare

  › Configure now
  Starting from∗ ：	215.68 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cast Iron Pillow Unit UCPA

  NIPPON PILLOW BLOCK

  [Features] Pillow block unit to reduce installation space.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	19.97 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SKF Pillow Block Housing, Gray Cast Iron, Long Base, Type SE

  SKF

  Select to compare

  › Configure now
  Min. Shipping Days ：	5 Days

• 

  Pillow Type

  ZEN

  Select to compare

  › Configure now
  Min. Shipping Days ：	4 Days

• 

  INA Pillow Block Unit with Long Base, Gray Cast Iron, Eccentric Locking Collar, R Seal

  INA

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	27.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pillow Type

  SNR

  Select to compare

  › Configure now
  Starting from∗ ：	41.55 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  FAG Pillow Block Housing, Gray Cast Iron, Long Base, Type SNV..- F-L

  FAG

  Select to compare

  › Configure now
  Starting from∗ ：	55.41 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SKF Y-Pillow Block Unit with Long Base, Gray Cast Iron, Grub Screw Fixing and Flingers

  SKF

  Select to compare

  › Configure now
  Starting from∗ ：	28.41 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ConCentra-unit

  SKF

  Select to compare

  › Configure now
  Starting from∗ ：	56.02 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type

  ASAHI SEIKO

  Pillow-type unit UCP200-type bearing box with raised center height.

  Select to compare

  › Configure now
  Starting from∗ ：	22.85 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUP

  ASAHI SEIKO

  The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Select to compare

  › Configure now
  Starting from∗ ：	43.11 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pillow Unit Silver Series with Set Screws, Cylindrical Hole Shape, KP

  ASAHI SEIKO

  [Features]
  · Although the bearing box is a standard pillow shape, it is smaller and more lightweight than conventional insert bearing units.
  · Also, the bearing box is marked with a center mark for easy positioning.
  · The fixation method for the bearing box and shaft is the set screw method.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	14.41 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pillow Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	9.94 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Narrow Pillow Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  • Volume Discount

  • Stock

  Select to compare

  › Configure now
  Starting from∗ ：	9.80 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Steel Plate Pillow Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Select to compare

  › Configure now
  Starting from∗ ：	8.25 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Plummer block housing units TF Series

  SKF

  Select to compare

  › Configure now
  Starting from∗ ：	28.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Plummer block housing units YTH Series

  SKF

  Select to compare

  › Configure now
  Starting from∗ ：	91.41 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Plummer block housing units

  NKE BEARINGS

  Select to compare

  › Configure now
  Min. Shipping Days ：	4 Days

• 

  SKF Pillow Block Unit, Plastic, Long Base, Type SYK

  SKF

  Select to compare

  › Configure now
  Starting from∗ ：	8.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SKF Y-Pillow Block Unit with Long Base, Gray Cast Iron, Eccentric Locking Collar Fixing, and Standard Seal

  SKF

  Select to compare

  › Configure now
  Starting from∗ ：	33.70 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SKF Pillow Block Unit, Gray Cast Iron, Short Base, Type SYF

  SKF

  Select to compare

  › Configure now
  Starting from∗ ：	14.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  INA Pillow Block Unit with Long Base, Gray Cast Iron, Eccentric Locking Collar, R Seal, Heavy-Duty Series

  INA

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	90.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...