Adjuster

?* Information on days to ship and prices

• • Recommendation

  

  Mounting Pad

  HALDER

  [Features]
  · Can be used as feet or thrust pads for machinery.
  · Operating temperature range for plastic: -30°C to +80°C

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.41 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjustment Pads / Fixed Type

  MISUMI

  [Features] This type has a single hole through which an anchor can be driven.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.67 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Mount / Standard

  MISUMI

  [Features] One standard levelling bracket. [Material] Available in stainless steel or steel.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	Same day

• 

  Leveling Mount / Heavy Load

  MISUMI

  [Features] A heavy-duty levelling bracket. [Material] Available in stainless steel or steel.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	Same day

• 

  Rubber Base Adjustment Pads

  MISUMI

  [Features] The attached rubber dampens vibrations with the floor. [Material] Available in stainless steel or steel.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.43 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjustment Pads / Nonslip Type

  MISUMI

  [Features] The rubber of the pad part grips the floor surface. [Material of threaded part] Stainless steel / steel

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	2.45 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjuster Feet / Resin Rubber Type

  MISUMI

  [Features] The bolt shank is inclined to allow use on sloping floor surfaces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.73 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjuster Feet / Rotary Type / Short

  MISUMI

  [Features] The bolt shank is inclined to allow use on sloping floor surfaces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	2.57 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Height Adjusting Elements

  HALDER

  For levelling of machines and installations when seating areas are not parallel.
  For vertical adjustment, the self-locking height adjusting elements are fitted with a fine-pitch thread. All elements have a throughgoing bore for fastening purposes. A turn-out lock serves as height limit for the maximum adjustment height.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.84 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Levelling feet steel or stainless steel Form A (K0739)

  KIPP

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Rubber pad dampen structural sound
  
  · Suitable nuts included
  
  · Material: Foot plate and threaded spindle, steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.26 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Height Adjusting Elements

  HALDER

  For levelling of machines and installations.
  For vertical adjustment, the self-locking height adjusting elements are fitted with a fine-pitch thread. All elements have a throughgoing bore for fastening purposes. A turn-out lock serves as height limit for the maximum adjustment height.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	42.98 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Foot (Heavy Load / Super Heavy Load Type)_FPM

  NABEYA BI-TECH

  Heavy load / super heavy load type leveling foot. The screw is made of steel. Outstanding durability.
  
  [Features]
  · Ideal for the leveling of transfer lines, etc.
  · The pad can be tilted up to 15°.
  · Effective for use on slopes.
  · Thread diameters from M10 to M24 are available as standard.
  · FPM-G and FPM-GH come with a rubber disk for slip prevention.
  · FPM and FPM-G are heavy load types.
  · FPM-H and FPM-GH are super heavy load types.
  · Products with a pad diameter equal to or greater than ø80 have two hidden holes for anchor bolts and two guide holes for hole drilling.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.72 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Height Adjusting Elements, high

  HALDER

  For levelling of machines and installations.
  For vertical adjustment, the self-locking height adjusting elements are fitted with a fine-pitch thread. All elements have a throughgoing bore for fastening purposes. A turn-out lock serves as height limit for the maximum adjustment height.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	44.25 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjustment Pads / Two Hole Type

  MISUMI

  [Features] This product is equipped with 2 holes for anchoring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.80 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  LV.A - Levelling elements -Technopolymer base steel stem

  ELESA

  Levelling elements with base in black glass fibre reinforced polyamide-based technopolymer, threaded polished zinc-plated steel articulated stem with adjusting hexagon and option of having it without no-slip disk or with SBR rubber no-slip disk fixed to the base.
  The special knurling under the lower lip of the base provides excellent stability and grip when using the levelling element without no-slip disk even on surfaces that are not perfectly flat.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.65 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  LX - Levelling elements -Technopolymer base steel or stainless steel stem

  ELESA

  Levelling elements with base in polyamide-based technopolymer with adjusting hexagon, black colour, and threaded stem in polished zinc-plated steel.
  Executions with AISI 304 stainless steel threaded stem, base with cross recess for screwdriver and base with non-slip SBR rubber disc are also available.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	0.46 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Vibration-Proof Wedge Mount PKA (Bolt-On Type)

  NABEYA

  A wedge mount that features a vibration-proof function.
  
  [Features]
  · A type for fixing machinery and mounts.
  · A precision leveling wedge mount featuring a precise leveling mechanism, a large adjustment stroke, and a vibration-proof function.
  · In particular, it can be used for vibrations caused by machinery, die-cast machines that cause strong shocks, as well as injection molding machines and impact testing machines, etc.
  · Leveling screw for flexible connection (BNVRBF) can be used for the fixing screw.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	310.60 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  High Wedge

  KURASHIKI KAKO

  Compact and with high performance. High precision leveling and mounting are possible thanks to the wedge mechanism.
  
  [Features]
  · A type with improved rigidity and leveling accuracy that can be used with small to medium sized machinery.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	229.21 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Levelling feet steel or stainless steel Form B (K0739)

  KIPP

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Rubber pad dampen structural sound
  
  · Suitable nuts included
  
  · Material: Foot plate and threaded spindle, steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.12 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Adjuster with Bottom Part Rubber for Light Vibration-Proofing D-A III / D-A III FR / D-A III SI / D-B III / D-B III FR / D-B III SI

  DAIWARASHI

  An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."
  
  [Features]
  · Since the rubber part comes in contact with the floor, floor damage is prevented.
  · A light vibration-proof type adjustment bolt.
  · However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
  · Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
  · A nylon washer is used between the receiver and bolt, and rotation is smooth.
  · The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
  · The SI type is white and is characterized by hardly leaving traces of rubber.
  · Suitable for office equipment, etc.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.01 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  LS.A - Levelling elements -Technopolymer base steel stem

  ELESA

  Levelling feet with base in black glass fibre reinforced polyamide-based technopolymer, threaded polished zinc-plated steel articulated stem with adjusting hexagon and option of having it without no-slip disk or with SBR rubber no-slip disk fixed to the base.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	0.66 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjuster Feet / Rotary Type

  MISUMI

  [Features] The screw shaft is inclined to allow use on sloping floor surfaces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.13 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Foot_FCM / FCF

  NABEYA BI-TECH

  A plastic pad leveling foot. The screw is made of steel. Outstanding durability.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.17 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Mounting Pad With Fastening Holes

  HALDER

  [Features]
  · Can be used as feet or thrust pads for machinery.
  · Includes 2 fastening holes in pad.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	20.00 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Levelling feet with vibration damping element

  GANTER

  Levelling feet GN 148 are designed for setting up heavy machinery and units with insulation against vibrations.
  This has a positive impact on the lifetime of machines and additionally reduces the noise pollution.
  The structure is such that horizontal forces are also absorbed.
  The design with tear-off lock (Type 2) protects the levelling feet from destruction caused by tear-off under excessive tension loads.
  The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	45.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  6460 Wedge block Herkules height wedge

  AMF

  Wedge block Herkules height wedge Centering hole dia. 12 mm. Spherical graphite cast iron and steel tempered and burnished. Wedge faces precision machined. Complete with one ball-pad no. 6440. The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	501.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  LV.A-SST-ESD-C - Levelling elements -ESD conductive technopolymer base stainless steel stem

  ELESA

  Levelling elements with base in black special conductive glass fibre reinforced polyamide-based technopolymer, threaded polished AISI 304 stainless steel articulated stem with adjusting hexagon and option of having it without no-slip disk or with SBR rubber no-slip disk fixed to the base.
  The bases are suitable for "ESD PROTECTED AREA" (EPA) where components, which are susceptible to electrostatic discharges, are handled.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	15.38 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Levelling feet round (K0674)

  KIPP

  · Compensates for uneven ground
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Assembly aid: cross slit in plate base
  
  · Various versions

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	0.45 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Adjuster Feet / Tapped Socket Type

  MISUMI

  [Features] This product can be used as a strike plate for fixing the adjusting screw.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.75 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tabletop Leveling Mounts / Grip Type

  MISUMI

  [Features] Less slippery than conventional products, also available with swivel function.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.66 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Foot (Heavy Load / Super Heavy Load Type)_FPMS

  NABEYA BI-TECH

  Heavy load / super heavy load type leveling foot. The screw is stainless steel and features excellent corrosion resistance.
  
  [Features]
  · Can be used as a light load idler for wires.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	28.79 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  LV.F - Levelling elements for ground mounting -Technopolymer base steel stem

  ELESA

  Levelling elements for fixing to the ground with base in black glass fibre reinforced polyamide-based technopolymer, threaded polished zinc-plated steel articulated stem with adjusting hexagon and option of having it without no-slip disk or with SBR rubber no-slip disk fixed to the base.
  The fixing is carried out by means of two 180° holes, closed by a diaphragm (removable with an awl) to prevent the deposit of unsanitary residues if not used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	2.09 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  High Mount TYPE LM

  KURASHIKI KAKO

  [Features]
  · Demonstrates high vibration-proofing performance with a compact body.
  · An LM type handle that also facilitates level adjustments.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	44.15 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Foot Jack FPK Type

  NABEYA

  A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.97 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Anti-Vibration Foot Jack

  NABEYA

  A vibration-proof foot jack that in which a high performance foamed polyurethane pad is used. Higher performance than rubber pads.
  
  [Features]
  · A foot jack with a leveling mechanism and vibration-proofing function.
  · Higher performance than rubber pad products.
  · Features superior solution resistance and will not transfer onto floors.
  · Since the bolt connection is flexible, it can absorb the sloping of the floor.
  · Three types of pads are available to satisfy conditions for vibration frequency, machine type, and weight.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.77 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel Level Adjuster KC-1275-D

  TAKIGEN

  Since the area of the bottom part that comes in contact with the ground is larger than that of general level adjusters, it is stable even when placed on soft surfaces such as on soil.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.92 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  LV.A-SST - Levelling elements -Technopolymer base stainless steel stem

  ELESA

  Levelling elements with base in black glass fibre reinforced polyamide-based technopolymer, stem with threaded AISI 304 stainless steel joint with adjusting hexagon and option of having it without no-slip disk or with SBR rubber no-slip disk fixed to the base.
  The special knurling under the lower lip of the base provides excellent stability and grip when using the levelling element without no-slip disk even on surfaces that are not perfectly flat.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.09 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Seating Elements, with plastic contact surface, orienting

  HALDER

  Can be used as screw-in foot or thrust pad.
  The plastic coating is gentle and protects high-quality surfaces. In addition, the oscillating seating is suitable for non-parallel surfaces.

  Select to compare

  › Configure now
  Starting from∗ ：	17.40 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  High Mount TYPE M

  KURASHIKI KAKO

  Demonstrates high vibration-proofing performance with a compact body. Selection is possible from a wide variety to suit the application.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	32.48 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Table-Top Bases

  MISUMI

  [Features] A foot for mounting light equipment such as test equipment. [Material] PP resin (base) / EN 1.0038 Equiv. (threaded part).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.71 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Block G Type

  NABEYA

  Can be used together with an anchor bolt and is ideal for large machinery and large surface plates.
  
  [Features]
  · Features good precision.
  · Lowest height is low.
  · Can be fixed with an anchor bolt after precise adjustment.
  · Ideal for large machinery and large surface plates.
  · Convenient for the centering of large workpieces

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	241.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Foot Jack FJB Type (Rubber Base Type)

  NABEYA

  A rubber base foot jack. Features a slipping prevention effect and light vibration-proofing properties.
  
  [Features]
  · A Phillips head slot has been provided on the bottom of the base and assembly can be done quickly with an impact wrench, etc.
  · A nylon washer is built in to the base upper surface enabling operations to be performed smoothly.
  · The bottom part rubber features liquid resistance (gasoline, kerosene, acids, alkaline substances) and can be used from -20°C to 120°C.
  · The bottom part rubber features a slipping prevention effect, cushioning properties, and light vibration-proofing properties.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.33 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Foot Jack FJK Model (Fixed Type)

  NABEYA

  Can be fixed with an anchor bolt.
  
  [Features]
  · A hex nut is press-fitted to the bottom of the base to enable quick assembly with an impact wrench, etc.
  · Can be fixed using an anchor bolt

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.47 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Foot Jack FJV Model

  NABEYA

  [Features] Inexpensive foot lifter. [Bolt material] SWRCH15R

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  OHNO RUBBER, Vibration-Proof Leveling Pad O-Leg Level Adjuster, Vertical Vibration-Proof Type

  OHNORUBBER

  [Features]
  · Devices are securely fixed by the friction of rubber.
  · A non-polluting material is used for the rubber part.
  · A wide variety of types are available and the optimal item can be selected depending on the usage conditions and application.
  
  [Uses]
  · Vibration prevention for various industrial equipment.
  · Level adjustments for equipment height.
  · Installation on floor surfaces.
  · Vibration prevention for various industrial equipment, level adjustments for equipment height, and installation on floor surfaces.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	5.93 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...