Rod End Bearings, Spherical Bearings（Main Body Material：Steel）

?* Information on days to ship and prices

• 

  Rod End Bearings / Standard

  MISUMI

  [Material] Main body EN 1.1181 Equiv.; Connection thread form: you can choose male or female thread.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.68 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spherical Bearings / Standard

  MISUMI

  [Material] Support: EN 1.1181 Equiv., spherical inner ring: JIS-SUJ (rolling bearing steel)2 (58HRC or more), sleeves: special copper alloy with surface treatment options: spherical inner ring: hard chrome plating

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.97 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End, Male Threaded Type POS

  THK

  This model is a highly rigid rod end that is basically the same as the female threaded model PHS, but has a male thread on the holder end.
  * The rod end shown in the photo is a representative product.
  Thread sizes M5 and M6 do not come with a nipple. Lubricate the bearing directly.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.44 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End, Female Threaded Type PHS Type

  THK

  Highly rigid with superior abrasion and corrosion resistance.
  The correct amount of lubricant can be supplied to the sliding surface via the grease nipple attached to the holder.
  
  [Features]
  · Lubrication: Lubricate before use. There is a lubrication hole and oil groove on the holder, so it can be lubricated via the grease nipple.
  · Left-hand female thread identification: For left-hand female threads, the letter "L" is added. "L" is marked on the holder of the product.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.67 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ball studs for ball joints DIN 71803 Form C (K0713)

  KIPP

  · Spare part for DIN 71802 ball joints

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	0.67 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spherical Bearing with Housing / Compact Type

  MISUMI

  [Spherical plain bearing "Spherical plain bearing type" Flange type 4 circles "Main body material" EN 1.1181 Equiv. "Ball material" JIS-SUJ (rolling bearing steel)2 "Bushing material" Special copper alloy.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	59.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spherical Bearing PB Type

  THK

  A highly rigid spherical bearing with superior corrosion and abrasion resistance. The sliding surface of the bearing can be thoroughly lubricated from the oil groove and lubrication hole on the outer ring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	14.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End, Female Threaded Type (Oil Free) NHS-T Type

  THK

  An oil free type rod end that uses self-lubricating synthetic plastic formed between the steel holder and the spherical inner ring.
  The gap on the sliding surface is minimized, allowing accurate link motion to be achieved.
  
  [Features]
  · NHS-T Type (oil free type)

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.56 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End, Female Thread Type PHS Series

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	13.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End, Male Thread Type POS Series

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	12.18 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Universal (Metal Rod End Fitting) Ball Joint

  AIRTAC

  Universal (metal rod end fitting) ball joint manufactured by AirTAC, a company highly rated for its low prices and high quality.· Lubricated type universal ball joint

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TRUSCO Rod End, Oil Free Type, Female Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · An oil free type rod end with a self-lubricating plastic liner bonded to the surface of the raceway for the ball.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	17.54 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Rod End, Male Threaded Type (Oil Free) NOS-T

  THK

  This model is an oil free type rod end that is basically the same as the female threaded model NHS-T, but has a male thread on the holder end.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.12 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End Bearing, Right Female Thread, Metal Type 4 Piece PR

  MINEBEA

  Also referred to as "Insert type," the construction features two insert pieces that are press-fitted in the body head end face from both sides. Assembly of the 4 piece rod end bearing is simple and economical, as it does not require spherical bearings like the 3 piece rod end. The body is made from S48C equivalent, providing relatively high tensile strength of 568N/mm┣sup┫2┣/sup┫ and a copper alloy insert offers resistance to seizure. This rod end bearing is widely used for construction and general industrial machinery.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.96 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pillow Ball

  IKO

  [Features]
  · Contains an oil groove and one oil hole on the outer ring.
  · Does not contain grease.
  · Use with sufficient lubrication.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	15.38 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spherical Slide Bearing

  IKO

  [Features]
  · Contains an oil groove and two oil holes on both the inner and outer rings.
  · Does not contain grease.
  · Use with sufficient lubrication.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	14.25 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rod-end eyes (K0127)

  KIPP

  · Steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.51 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  TRUSCO Rod End, Lubricated Type, Female Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	16.26 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ELGES Maintenance-Free Radial Spherical Plain Bearing Hard Chrome / PTFE, Opening, Dimension Series G

  ELGES

  Select to compare

  › Configure now
  Starting from∗ ：	37.18 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ELGES Radial Spherical Plain Bearing Requiring Maintenance with Cylindrical Extensions on The Inner Ring, Steel / Steel, Open

  ELGES

  Select to compare

  › Configure now
  Starting from∗ ：	23.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Axial joints similar to DIN 71802 (K0715)

  KIPP

  · For transmitting movement processes
  
  · Application sectors: machine and vehicle construction, material handling
  
  · Temperature range: -30 °C to +110 °C
  
  · Stainless steel version: protected against dust and dirt

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.45 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spherical Plain Bearing SA1

  THK

  [Structure and Features]
  · The spherical plain bearing is a self-aligning plain bearing designed for heavy loads. The inner and outer rings are made from high-carbon chromium bearing steel that is hardened, ground, phosphate-coated and seized with molybdenum disulfide (MoS2). The SA1 model can bear large radial loads and thrust loads in both directions. Furthermore, as it is highly impact resistant, the spherical plain bearing is most suited for low speed, heavy load rocking components such as the cylinder clevises or hinges of construction and civil engineering machinery, truck suspensions, and train bolster anchors.
  [Types and Features]
  · The SA1 model of the series is popular in Europe. The outer ring is split at one point and is narrower and thinner than the SB model, so it can be used in small spaces. Models with dust seals on both sides (SA1-UU) are also available. These seals are highly effective at keeping out dust.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.08 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spherical Plain Bearing SB

  THK

  The most widely used series in Japan. It is used for heavy loads since the spherical contact area has a large width.
  The outer ring is split at two points to accommodate the inner ring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.01 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TRUSCO Rod End, Oil Free Type, Male Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · An oil free type rod end with a self-lubricating plastic liner bonded to the surface of the raceway for the ball.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	17.54 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TRUSCO Rod End, Lubricated Type, Male Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	14.07 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ball studs for ball joints DIN 71803 Form B (K0713)

  KIPP

  · Spare part for DIN 71802 ball joints

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	0.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod End Bearing, Right Male Thread, Metal Type 4 Piece PR-E

  MINEBEA

  Also referred to as "Insert type," the construction features two insert pieces that are press-fitted in the body head end face from both sides. Assembly of the 4 piece rod end bearing is simple and economical, as it does not require spherical bearings like the 3 piece rod end. The body is made from S48C equivalent, providing relatively high tensile strength of 568N/mm┣sup┫2┣/sup┫ and a copper alloy insert offers resistance to seizure. This rod end bearing is widely used for construction and general industrial machinery.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pillow Ball, Insert Type PBI Series

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	12.45 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  ELGES Radial Spherical Plain Bearings Requiring Maintenance, Steel / Steel, Sealed, Dimension Series E

  ELGES

  Select to compare

  › Configure now
  Starting from∗ ：	18.05 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ELGES Maintenance-Free Rod End with Internal Thread, Dimension Series E, Open

  ELGES

  Select to compare

  › Configure now
  Starting from∗ ：	25.28 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ELGES Radial Spherical Plain Bearings Requiring Maintenance, Steel / Steel, Dimension Series G

  ELGES

  Select to compare

  › Configure now
  Starting from∗ ：	26.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ELGES Maintenance-Free Radial Spherical Plain Bearing Hard Chrome / ELGOGLIDE, Sealed, Dimension Series G

  ELGES

  Select to compare

  › Configure now
  Starting from∗ ：	83.06 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ELGES Radial Spherical Plain Bearing Requiring Maintenance with Cylindrical Extensions on The Inner Ring, Steel / Steel, Sealed

  ELGES

  Select to compare

  › Configure now
  Starting from∗ ：	31.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ball seats for angle joints DIN 71805 Form A (K0712)

  KIPP

  · Spare part for DIN 71802 ball joints

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	0.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod End Bearing, Left Female Thread, Metal Type 4 Piece PRL

  MINEBEA

  Also referred to as "Insert type," the construction features two insert pieces that are press-fitted in the body head end face from both sides. Assembly of the 4 piece rod end bearing is simple and economical, as it does not require spherical bearings like the 3 piece rod end. The body is made from S48C equivalent, providing relatively high tensile strength of 568N/mm┣sup┫2┣/sup┫ and a copper alloy insert offers resistance to seizure. This rod end bearing is widely used for construction and general industrial machinery.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	32.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Lubricated Type Spherical Plain Bearing

  CCVI

  ● This self-aligning type bearing has inner and outer rings with spherical sliding surfaces, so it can bear a large radial load and bi-directional axial load at the same time.
  ● The surfaces of the inner and outer rings are phosphate-treated and its sliding surfaces are coated with MoS2, making it ideal for low torque applications. This bearing offers excellent abrasion resistance and is mostly used in industrial machinery and construction machinery.
  ● Construction machinery parts
  ● Hydraulic cylinder parts
  ● Agricultural machinery parts
  ● Robot parts
  ● Transport equipment parts

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	6.95 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  DIN 71802 Ball joint

  REYHER

  Angle joints

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	3.14 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ELGES Hydraulic Rod End Requiring Maintenance with Square Welding Ends, Open

  ELGES

  Select to compare

  › Configure now
  Starting from∗ ：	43.05 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ELGES Hydraulic Rod End Requiring Maintenance with Thread Clamping, Din 24338 / ISO 6982, Open

  ELGES

  Select to compare

  › Configure now
  Starting from∗ ：	76.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ELGES Maintenance-Free Radial Spherical Plain Bearing Steel / PTFE, Opening, Dimension Series K

  ELGES

  Select to compare

  › Configure now
  Starting from∗ ：	12.51 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ELGES Axial Spherical Plain Bearings Requiring Maintenance, Steel / Steel, Open

  ELGES

  Select to compare

  › Configure now
  Starting from∗ ：	95.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ELGES Maintenance-Free Angular Contact Spherical Plain Bearing, Hard Chrome / ELGOGLIDE, Open

  ELGES

  Select to compare

  › Configure now
  Starting from∗ ：	69.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ball joints DIN 71802 Form CS (K0734)

  KIPP

  · Enables transmission and redirection of forces
  
  · Application sectors: machine and vehicle construction, material handling
  
  · Steel or stainless steel
  
  · Version: right or left-hand thread

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.79 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball seats for angle joints DIN 71805 Form B (K0712)

  KIPP

  · Spare part for DIN 71802 ball joints

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	0.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Lubricated Type Spherical Plain Bearing, Inner Ring Wide Type

  CCVI

  ● The features are identical to the GE type, but it is bigger than the GE type and has a larger load capacity
  ● Used widely in Japan
  ● Construction machinery parts
  ● Hydraulic cylinder parts
  ● Agricultural machinery parts
  ● Robot parts
  ● Transport equipment parts

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	12.38 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...