MISUMI Top
Materials
Urethane, Rubber, Sponge, Felt
Plates (Urethane / Rubber / Sponge / Felt)
Plates / SI / high strength / A50, A70 / through hole / adhesive layer

Configure

Grade, Type
Silicon (SI)
High Strength Silicon Rubber
Silicon (SI)
With or w/o Adhesive
- Adhesive
- No Adhesive
Thickness T(mm)
- 0.5
- 1
- 2
- 3
- 5
- 10
- 15
- 20
- 30
Width A(mm)
- 3
- 5
- 10
- 20
- 30
- 40
- 50
- 80
- 100
- 300
- 500
[10-1000/1mm units]
Length B(mm)
- 300
- 500
[10-1000/1mm units]
Hardness (Shore, Asker, Penetration)
- Shore A50
- Shore A70
Specifications
Hole Machining
Counterbored Hole Nominal Dia. [Z]
- 3
- 4
- 5
- 6
- 8
- 10
F(mm)
[5-495/0.5mm units]
G(mm)
[5-495/0.5mm units]
Through Hole Nominal Dia. [N]
- 3
- 4
- 5
- 6
- 8
- 10
Type
CAD
- 2D
- 3D

Plates / SI / high strength / A50, A70 / through hole / adhesive layer

CatalogP.2-431

Part number:

Still undefined. 764 possible part numbers found.

Outline drawing and specifications table
Part number list
More Information
Catalog

Outline drawing and specifications table

Dimensional Drawing

■Square Type

■Band Type

■A, B Configurable
-Standard-

■ Accuracy Standards
T Tolerance

A, B Tolerance

Silicone Rubber Sheet - Standard/High Strength Type - Machining Conditions

T	Tolerance
0.5	±0.2
1 to 3	±0.3
5	±0.4
10	±0.6
15 to 30	−0.5 to +2.0

A·B	Tolerance
200 or Less	±0.5
201 to 300	±1.0
301 to 500	±1.5
501 to 1000	±5.0

■A, B Configurable
-Hole Type-

-1 Hole- 1H

-2 Holes- 2H

-3 Holes- 3H

-4 Holes- 4H

-6 Holes- 6H

[!]The adhesive tape may tear from the body. Please use it as temporary fixing, or in combination with bolt fixing.

Hole Machining Details

(Through Hole)

(Counterbored
Hole)

Screw Nominal Dia.	3	4	5	6	8	10
d	3.5	4.5	5.5	6.5	9	12
d₁	6.5	8	9.5	11	14	17.5
h	3.5	4.5	5.5	6.5	9	11

A Selectable Type		A, B Configurable		[M] Material	[H] Hardness	Color
No Adhesive	Adhesive	No Adhesive	Adhesive	[M] Material	[H] Hardness	Color
RBSM	RBSMA	RBSMF	RBSMFA	Silicon Rubber	Shore A70	Light Gray
RBAM	RBAMA	RBAMF	RBAMFA	Silicon Rubber	Shore A50	Milky White
RBHSM	RBHSMA	RBHSMF	RBHSMFA	High Strength Silicone Rubber	Shore A50	Ivory

[ ! ]Adhesive thickness is 0.14 to 0.2 mm.
[ ! ]The milky white color of silicone rubber shore A 50 is translucent.
[ ! ]Temperature limit for seals is 120°C.
[ ! ] The service life is not constant depending on the operating environment.

Comparison of Chemical Resistance

	Urethane	Nitrile	Chloroprene	Ethylene	Butyl	Fluoro	Silicon	Low Elasticity
Gasoline Light Oil	◎	◎	○	×	×	◎	Possible use - Suitable	△
Water	△	◎	◎	◎	◎	◎	○	△
Strong Acid	×	○	○	○	◎	◎	△	△
Strong Alkali	×	○	◎	◎	◎	×	◎	○
Ether	×	Do not use - Possible use	Do not use - Possible use	○	Possible use - Suitable	Do not use - Possible use	Do not use - Possible use	△
Ketone	×	×	Do not use - Suitable	◎	◎	×	○	×

◎ = Most suitable, ○ = Suitable, △ = Possible use, × = Do not use

■Features of High Strength Silicon Rubber
Excels in tear strength compared with general silicon rubber.
Comparison of Tear Strength
(N/mm)

Rubber Type (Hardness)	Tear Strength
Silicon Rubber (Shore A70)	7
Silicon Rubber (Shore A50)	10
High Strength Silicon Rubber (Shore A50)	32
Nitrile Rubber (Shore A70)	20

[ ! ]JIS K6252

■Band Type

Part Number			A Selection
Type		T
No Adhesive RBSM RBAM ^*RBHSM	Adhesive RBSMA RBAMA ^*RBHSMA	0.5	3 5 10 20 30 40 50 80 100
		* 1
		* 2
		* 3
		* 5
		* 10

[ ! ]^*Only * marked T dimensions are available for RBHSM and RBHSMA
[ ! ]L dimension is 500 mm.

■A, B Configurable - Standard Type

Part Number			1 mm Increments
Type		T	A	B
No Adhesive RBSMF RBAMF ^*RBHSMF	Adhesive RBSMFA RBAMFA ^*RBHSMFA	0.5	10 to 1000	10 to 1000
		* 1
		* 2
		* 3
		* 5
		* 10
		15
		20
		30

[ ! ]^*Only * marked T dimensions are available for RBHSMF and RBHSMFA
[ ! ]A ≥ B ≥ T
[ ! ]For A and B dimensions of 501 or more, the T dimension is up to 10.

■Square Type

Part Number			A Selection
Type		T
No Adhesive RBSM RBAM ^*RBHSM	Adhesive RBSMA RBAMA ^*RBHSMA	0.5	300 500
		* 1
		* 2
		* 3
		* 5
		* 10
		15
		20
		30

[ ! ]^*Only * marked T dimensions are available for RBHSM and RBHSMA

■A, B Configurable - Hole Type

Part Number				1 mm Increments (A ≥ B ≥ T)		0.5 mm Increments		Screw Nominal Dia. Selection
Type		Nominal	T	A	B	F	G	N (Through Hole)	Z (Counterbored Hole)
No Adhesive RBSMF RBAMF ^*RBHSMF	Adhesive RBSMFA RBAMFA ^*RBHSMFA	1H 2H 3H 4H 6H	0.5	10 to 500	10 to 500	5 to 495 (1H Type) 9 to 491 (2H, 4H Type) 9 to 245 (3H, 6H Type)	5 to 495 (1H, 2H, 3H Type) 9 to 491 (4H, 6H Type)	3 4 5 6 8 10	—
			* 1						—
			* 2						—
			* 3						—
			* 5						—
			* 10						3	4
			15							4	5	6	8
			20							4	5	6	8
			30							4	5	6	8	10

[ ! ]^*Only * marked T dimensions are available for RBHSMF and RBHSMFA. [ ! ]A ≥ B ≥ T
[!]Dimension F Specification Range – 1H type selection: d (d1)/2 + 2.5 ≤ F ≤ A - d (d1)/2 - 2.5, when selecting 2H/4H Type: d (d1) + 5 ≤ F ≤ A - d (d1) - 5,
When selecting 3H/6H Type: d (d1) + 5 ≤ F ≤ A/2−d (d1)/2−2.5 is required.
[!]Dimension G Specification Range – 1H/2H/3H type selection: d (d1)/2 + 2.5 ≤ G ≤ B - d (d1)/2 - 2.5, when selecting 4H/6H Type: d (d1) + 5 ≤ G ≤ B−d (d1)−5 is required. (d for through holes, d1 for counterbored holes.)

Alterations

Alterations Code	Alteration Details		Applicable Conditions	Alteration Examples
XC	Hole Position From Left	XC = 1 mm Increments	[ ! ]5 ≤ XC ≤ 486 " ! " (2H, 4H Type): d (d₁)/2 + 2.5 ≤ XC ≤ A-F-d (d₁)/2-2.5 " ! " (3H, 6H Type): d (d₁)/2 + 2.5 ≤ XC ≤ A-2F-d (d₁)/2-2.5	RBSMF4H10 -200-150- F120- G100-N5- XC55
YC	Hole Position From Bottom	YC = 1 mm Increments	[ ! ]5 ≤ YC ≤ 486 [ ! ] d (d₁ )/2 + 2.5 ≤ YC ≤ B-G-d (d₁)/2-2.5	RBSMF4H15 -100-80- F60-G20- Z5-YC40
CCA CCB CCC CCD	Corner Cut	Any corner can be cut. 5 ≤ corner cut ≤ 10 (1 mm Increments) [Ordering Code] (Example) Corners of A and D When cutting with C5 => CCA5-CCD5	[ ! ]50 ≤ A/B [ ! ] For Adhesive Type, please specify with the adhesive side facing down. [NG]Applicable to A, B Dimension Configurable Type only [NG]T15, 20, and 30 are not selectable. [NG]A/B dimensions of 501 or higher are not selectable. [NG]Hole Type is not selectable.	RBSMF10- 300-200- CCA5-CCC5

Part number list

Number of items

...

Part number

Grade, Type

With or w/o Adhesive

Thickness T

(mm)

Width A

(mm)

Length B

(mm)

Hardness (Shore, Asker, Penetration)

Specifications

Hole Machining

Counterbored Hole Nominal Dia. [Z]

(mm)

Through Hole Nominal Dia. [N]

RoHS?

Minimum order quantity

[Silicon (SI)] Silicon (SI)	No Adhesive	0.5	3	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	0.5	5	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	0.5	10	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	0.5	20	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	0.5	30	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	0.5	40	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	0.5	50	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	0.5	80	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	0.5	100	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	0.5	300	300	Shore A50	A Selectable / Square	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	0.5	500	500	Shore A50	A Selectable / Square	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	1	3	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	1	5	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	1	10	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	1	20	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	1	30	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	1	40	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	1	50	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	1	80	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	1	100	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	1	300	300	Shore A50	A Selectable / Square	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	1	500	500	Shore A50	A Selectable / Square	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	2	3	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	2	5	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	2	10	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	2	20	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	2	30	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	2	40	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	2	50	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	2	80	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	2	100	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	2	300	300	Shore A50	A Selectable / Square	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	2	500	500	Shore A50	A Selectable / Square	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	3	3	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	3	5	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	3	10	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	3	20	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	3	30	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	3	40	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	3	50	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	3	80	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	3	100	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	3	300	300	Shore A50	A Selectable / Square	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	3	500	500	Shore A50	A Selectable / Square	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	5	3	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	5	5	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	5	10	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	5	20	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	5	30	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	5	40	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	5	50	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	5	80	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	5	100	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	5	300	300	Shore A50	A Selectable / Square	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	5	500	500	Shore A50	A Selectable / Square	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	10	3	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	10	5	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	10	10	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	10	20	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces
[Silicon (SI)] Silicon (SI)	No Adhesive	10	30	500	Shore A50	A Selectable / Band	No Drilling Alteration	-	-	-	-	10	1 pieces

Unit price (excluding VAT)(Unit price including VAT)	Standard shipping days

2.17 € ( 2.58 € )	6 working days
2.27 € ( 2.70 € )	6 working days
2.76 € ( 3.28 € )	6 working days
3.73 € ( 4.44 € )	6 working days
4.69 € ( 5.58 € )	6 working days
5.54 € ( 6.59 € )	6 working days
6.49 € ( 7.72 € )	6 working days
9.24 € ( 11.00 € )	6 working days
10.21 € ( 12.15 € )	6 working days
20.68 € ( 24.61 € )	6 working days
36.41 € ( 43.33 € )	6 working days
2.52 € ( 3.00 € )	6 working days
2.52 € ( 3.00 € )	6 working days
3.01 € ( 3.58 € )	6 working days
3.96 € ( 4.71 € )	6 working days
5.05 € ( 6.01 € )	6 working days
5.88 € ( 7.00 € )	6 working days
6.97 € ( 8.29 € )	6 working days
9.86 € ( 11.73 € )	6 working days
10.58 € ( 12.59 € )	6 working days
24.29 € ( 28.91 € )	5 working days
37.51 € ( 44.64 € )	6 working days
2.40 € ( 2.86 € )	6 working days
2.76 € ( 3.28 € )	6 working days
3.47 € ( 4.13 € )	6 working days
4.92 € ( 5.85 € )	6 working days
6.49 € ( 7.72 € )	6 working days
7.94 € ( 9.45 € )	6 working days
9.37 € ( 11.15 € )	6 working days
13.09 € ( 15.58 € )	6 working days
14.06 € ( 16.73 € )	6 working days
27.04 € ( 32.18 € )	5 working days
41.59 € ( 49.49 € )	6 working days
2.65 € ( 3.15 € )	6 working days
3.01 € ( 3.58 € )	6 working days
3.96 € ( 4.71 € )	6 working days
5.88 € ( 7.00 € )	6 working days
8.04 € ( 9.57 € )	6 working days
9.86 € ( 11.73 € )	6 working days
11.18 € ( 13.30 € )	6 working days
15.86 € ( 18.87 € )	6 working days
18.14 € ( 21.59 € )	6 working days
30.89 € ( 36.76 € )	6 working days
56.01 € ( 66.65 € )	6 working days
2.88 € ( 3.43 € )	6 working days
3.47 € ( 4.13 € )	6 working days
5.05 € ( 6.01 € )	6 working days
8.04 € ( 9.57 € )	6 working days
10.33 € ( 12.29 € )	6 working days
12.50 € ( 14.88 € )	6 working days
14.18 € ( 16.87 € )	6 working days
20.44 € ( 24.32 € )	6 working days
23.44 € ( 27.89 € )	6 working days
40.39 € ( 48.06 € )	6 working days
94.11 € ( 111.99 € )	6 working days
3.73 € ( 4.44 € )	6 working days
4.81 € ( 5.72 € )	6 working days
7.21 € ( 8.58 € )	6 working days
11.78 € ( 14.02 € )	6 working days
15.74 € ( 18.73 € )	6 working days

...

Basic information
Outline and specifications

Basic information

Technical information

Outline and specifications

General Information - Panels (polyurethane rubber, rubber, foam, felt)

Selection details of panels (polyurethane rubber, rubber, foam, felt)

- Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam

- Thickness (mm): 0.5 to 50

- Width (mm): 3 to 500

- Length (mm): 10 to 2000

Description/Basics

Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.

In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.

Additional properties on foam panels and rubber plates can be found in the Properties PDF.

MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.