Configure
- Material
- Hardness
- Material
- Hardness Details
- I.D. Tolerance
- Bushing Dia. D(Ø)
- 10
- 12
- 16
- 20
- 25
- L(mm)[5-20/1mm units]
- P(mm)[4-22/0.01mm units]
- R(mm)[0.2-11/0.01mm units]
- W(mm)[3-22/0.01mm units]
- CAD
- 2D
- 3D
- Est. shipping days
- All
- Within 10 working days
Bushings for Inspection Components / Square
Part number:
possible part numbers found.Outline drawing and specifications table
■Straight (Dowel Pin)
■Straight (D Cut)
[ ! ]1
[ ! ]1
[ ! ]1 
| [M] Material | [H] Hardness | Type | |||
| Dowel Pin | D Cut | ||||
| P+0.03 +0.01 W+0.03 +0.01 | PH7 WH7 | P+0.03 +0.01 W+0.03 +0.01 | PH7 WH7 | ||
| JIS−SKS93 Equivalent | 50 to 60HRC | KJBSR | KJBHSR | KJBSRD | KJBHSRD |
| EN 1.4301 Equiv. | — | KJBSRS | KJBHSRS | KJBSRDS | — |
Specification Table
| Part Number | P | — | W | — | R | — | L | |||
| — | ||||||||||
| Type | D | |||||||||
| KJBSR | 12 | — | P8.00 | — | W5.00 | — | R0.3 | — | L12 | |
| P, W | H7 |
| 3.00 to 6.00 | +0.012 0 |
| 6.01 to 10.00 | +0.015 0 |
| 10.01 to 18.00 | +0.018 0 |
| 18.01 to 22.00 | +0.021 0 |
| Part Number | P 0.01 mm Increments | W 0.01 mm Increments | R 0.01 mm Increments | L 1 mm Increments | ||||
| Type | [ ! ]3 D | |||||||
| Straight | ||||||||
| Dowel pin [!] 2 | D Cut | |||||||
| P+0.03 +0.01 W+0.03 +0.01 | PH7WH7 | P+0.03 +0.01 W+0.03 +0.01 | PH7 WH7 | |||||
| KJBSR | KJBHSR | KJBSRD | KJBHSRD | 10 | 4.00 to 8.00 | P > W (W ≥ 3.00) | 0.20 ≤ R ≤ W/2 | 5 to 20 |
| 12 | 4.00 to 10.00 | |||||||
| KJBSRS | KJBHSRS | KJBSRDS | 16 | 6.00 to 14.00 | ||||
| 20 | 10.00 to 18.00 | |||||||
| 25 | 14.00 to 22.00 | |||||||
[!] 3. There must be a 1 mm or greater wall thickness between the outer diameter and the square hole (1.5 mm or more if D = 25). (K ≤ Pmax)
Alterations
| Part Number | — | P | — | W | — | R | — | L | — | T | — | (FC·NC, etc.) |
| KJBHSR20 | — | P12.00 | — | W10.00 | — | R0.3 | — | L20 | — | NC |
| Alterations | Code | Spec. |
Groove (for Adhesive Reservoir) | FC | Adds an adhesive reservoir groove. " ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more. [ ! ] Applicable when L ≥ 8 for Straight Type, L ≥ 15 for Shouldered Type [NG] Combination with alteration NC is not available |
Groove (for Retaining) | NC | Adds groove for retaining. " ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more. [ ! ] Applicable when L ≥ 8 for Straight Type, L ≥ 15 for Shouldered Type [NG] Combination with alteration FC is not available |
| Alterations | Code | Spec. |
Shoulder Thickness Tolerance | TKC | Changes shoulder thickness tolerance to ±0.01. [ ! ] Applicable to Shouldered Type only |
L Dimension Tolerance | LKC | Changes L dimension tolerance to 0 -0.05. [ ! ] Applicable only when L ≤ 19 |
Part number list
Number of items
| Part number |
|---|
Unit price (excluding VAT)(Unit price including VAT) | Standard shipping days |
|---|
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
More Information
Basic information
[Features] Sockets for test fixtures with square holes.
