L-section rings ECVA301 Series / Internal diameter 90mm (Part Numbers)
[Specifications]
・Inside diameter: 90 mm
・Outside diameter: 124 mm
・eClass code:
・23-05-09-01
Angle rings (L-shaped thrust collars) are used either with NU design cylindrical roller bearings to locate the shaft axially in one direction, or with NJ design bearings to locate the shaft axially in both directions. The rings are made of carbon chromium steel and are hardened and ground. They are supplied as separate components.
[Features]
・Locate the shaft axially if there are no NJ or NUP design locating bearings within the product range
・Provide an extended inner ring seat for heavily loaded bearings in the locating position
・Simplify design or mounting procedures
・Inside diameter: 90 mm
・Outside diameter: 124 mm
・eClass code:
・23-05-09-01
Angle rings (L-shaped thrust collars) are used either with NU design cylindrical roller bearings to locate the shaft axially in one direction, or with NJ design bearings to locate the shaft axially in both directions. The rings are made of carbon chromium steel and are hardened and ground. They are supplied as separate components.
[Features]
・Locate the shaft axially if there are no NJ or NUP design locating bearings within the product range
・Provide an extended inner ring seat for heavily loaded bearings in the locating position
・Simplify design or mounting procedures
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
HJ318 ECVA301
- Product data
- CAD data not available
Basic information
| Internal diameter(mm) | 90 | Outer diameter(mm) | 124 | Width(mm) | 18.5 |
|---|---|---|---|---|---|
| Weight(g) | 629.0 | GTIN/EAN | 7316570099096 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.