Thread Inserts

?* Information on days to ship and prices

• 

  Self-Tapping Inserts / Slotted

  MISUMI

  It is a split groove threaded insert, threaded on both the inner and outer diameters.
  Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Insert Nitronics 60

  RECOIL

  Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.80 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ensat, Slotted Type 302

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  A general-purpose well-balanced screw insert with low cost.
  [Features]
  ・ At the time of press-fit, the product has direction.
  ・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Insert Phosphor Bronze

  RECOIL

  Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ensat, Ultra Coarse Outside Screw, Type 309

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting slot (K0978)

  KIPP

  [Specifications]
  ・Version 1: Self-tapping
  ・Version 2: With cutting slot
  ・Material: Stainless steel, Steel
  ・Surface finish body: Bright, galvanised
  ・D1=Internal thread: M3-M16
  
  [Features]
  ・For making high-strength screw connections in materials with low shear strength
  ・Guarantees secure and firm anchoring in the host material
  ・Ideal for difficult-to-machine materials
  ・Version: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	1.34 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  These inserts are the best choice for easy and secure fitment into plastic holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded inserts reinforced (07661)

  NORELEM

  · Stronger cross section for inserts with an increased load
  
  · Enables tapped holes which have been damaged to be used again or repaired
  
  · Suitable for use in various materials
  
  · Quick and easy installation
  
  · No other special tools are needed besides the assembly tool

  Select to compare

  Configure now
  Starting from∗ ：	4.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stainless Steel / Insert Nut Threaded Type / IRU

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Brass Ultrasert IV (Flanged) / HFU

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 3/4/5/6/8
  [Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.54 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting bores (K0979)

  KIPP

  [Specifications]
  ・Version 1: Self-tapping
  ・Version 2: With cutting bore
  ・Material: Stainless steel, Steel
  ・D1=Internal thread: M3-M12
  
  [Features]
  ・For making high-strength screw connections in materials with low shear strength
  ・Guarantees secure and firm anchoring in the host material
  ・Ideal for difficult-to-machine materials
  ・Version: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.51 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Thread Inserts

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  General purpose type. Low cost and well balanced.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.29 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass Bit Insert (Flanged) / HFB

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.6/3/4/5
  [Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Threaded Inserts (K0398)

  KIPP

  [Specifications]
  ・Version 1: Standard
  ・Material: Steel, Stainless steel
  ・Core drill φ(mm): 6.9-14.8
  ・D1=Internal thread: M5-M12x1.25
  
  [Features]
  ・Enables tapped holes which have been damaged to be used again or repaired
  ・Suitable for use in various materials
  ・Quick and easy installation
  ・No other special tools are needed besides the assembly tool

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded inserts reinforced (K0399)

  KIPP

  [Specifications]
  ・Version 1: Reinforced
  ・Material: Steel, Stainless steel
  ・Core drill φ(mm): 6.9-31
  ・D1=Internal thread: M4-M24x2
  
  [Features]
  ・Stronger cross section for inserts with an increased load
  ・Enables tapped holes which have been damaged to be used again or repaired
  ・Suitable for use in various materials
  ・Quick and easy installation
  ・No other special tools are needed besides the assembly tool

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ensat Three-Hole / Short 307 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Sparrow (Type SP)

  JAPAN DRIVE-IT

  [Type] Press Fit Use
  [Application] Resin: General
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
  [L](D = screw diameter M) 1D 1.5D 2D
  [Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.31 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Type 308, 3-Hole / Long Size

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.12 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  DIN 7965 Screwed inserts

  REYHER

  RAMPA couplings; Screwed inserts; Slotted nuts

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  ART 88302 ENSAT-Thread inserts

  REYHER

  ENSAT inserts; Screwed inserts

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.41 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Insert bushings

  GANTER

  Drive the Stainless Steel-Insert bushings GN 992.5 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.
  The dimensions match those of the construction tubes GN 990, but checking the tolerance position of the tube is recommended.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.22 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ensat, Chip-Free / Short, Type 337

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Brass Insert Nut (Screw-In Type) IRB / IRB-C

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	1.34 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Insert bushings, Aluminium

  GANTER

  Drive the insert bushings GN 992 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.
  The dimensions match those of the construction tubes GN 990, but checking the tolerance position of the tube is recommended.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  C Lock (CL Type)【100 Pieces Per Package】

  BOHSEI

  The outer knurled form is reversed, which allows for high tensile strength and torque strength.

  Select to compare

  Configure now
  Starting from∗ ：	12.45 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Screwsert (Type SCT)

  JAPAN DRIVE-IT

  [Type] Self-tapping Used
  [Application] Resin: General
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
  [L](D = screw diameter M) 2D 2.5D
  [Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Techlock (SL)【1-5,000 Pieces Per Package】

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
  [L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
  [Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.23 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting slot (07652)

  NORELEM

  · For making high-strength screw connections in materials with low shear strength
  
  · Guarantees secure and firm anchoring in the host material
  
  · Ideal for difficult-to-machine materials
  
  · Version: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	0.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Recoil-Free (UNC) SUS304

  RECOIL

  The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.45 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Insert SUS316

  RECOIL

  An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.49 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention / Slotted) / IRU-SW

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	1.70 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Ensat Expanded Slot Type, Model 302, Inch Type

  KKV

  [Features]
  · Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
  · The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
  · If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
  
  [Materials]
  SUM22L free-cutting steel (equivalent), hexavalent chromate

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Thread Insert (Box)【100 Pieces Per Package】

  MISUMI

  For your own stock or for a large number of uses, buying per box is beneficial.

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Self Floating Fastener【1-1,000 Pieces Per Package】

  SEL JAPAN

  Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1-2,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.47 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass, Ensat, Screw Plastic Deformation, Type 305

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ensat, Chip-Free / Long, Type 338

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Ensat, 3-Hole / Long Size, 308 Type, Stainless Steel

  SUNCO

  [Nominal M] 16
  [Material] Stainless Steel
  [Surface Processing] None

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	19.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Metric]Recoil Kit, M6 to 1.0 (Coarse)

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M6-1.0 (coarse)
  ・No. of recoils-15 pcs

  Select to compare

  Configure now
  Starting from∗ ：	108.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ART 88330 AMECOIL-Thread inserts

  REYHER

  AMECOIL inserts; AMECOIL-inserts

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.96 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...