Thread Inserts（Material：Steel）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Self-Tapping Inserts / Slotted
MISUMI
It is a split groove threaded insert, threaded on both the inner and outer diameters.
Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.20 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Threaded inserts self-tapping with cutting slot (K0978)
KIPP
· For making high-strength screw connections in materials with low shear strength
· Guarantees secure and firm anchoring in the host material
· Ideal for difficult-to-machine materials
· Version: steel or stainless steel- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.36 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ensat, Slotted Type 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
- Stock
Configure nowStarting from∗ ： 0.61 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 0.45 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Threaded Inserts (K0398)
KIPP
· Enables tapped holes which have been damaged to be used again or repaired
· Suitable for use in various materials
· Quick and easy installation
· No other special tools are needed besides the assembly tool- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3.69 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ensat Expanded Slot Type, Model 302, Inch Type
KKV
[Features]
· Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
· The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
· If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
[Materials]
SUM22L free-cutting steel (equivalent), hexavalent chromate- Volume Discount
Configure nowStarting from∗ ： 0.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Threaded inserts self-tapping with cutting bores (K0979)
KIPP
· For making high-strength screw connections in materials with low shear strength
· Guarantees secure and firm anchoring in the host material
· Ideal for difficult-to-machine materials
· Version: steel or stainless steel- 2D / 3D CAD data available
Configure nowStarting from∗ ： 0.51 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Threaded inserts reinforced (K0399)
KIPP
· Stronger cross section for inserts with an increased load
· Enables tapped holes which have been damaged to be used again or repaired
· Suitable for use in various materials
· Quick and easy installation
· No other special tools are needed besides the assembly tool- 2D / 3D CAD data available
Configure nowStarting from∗ ： 3.69 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Ensat, Type 308, 3-Hole / Long Size
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
Configure nowStarting from∗ ： 0.93 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Ensat Three-Hole / Short 307 Type
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
Configure nowStarting from∗ ： 0.82 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Threaded insert steel self-tapping type B (K1538)
KIPP
· Compatible with Bosch profile
· Standard thread M8
· Easy to install- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.38 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Iron, Ensat Small Outside Three-Hole / Short 347 Type
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
Configure nowStarting from∗ ： 1.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Self Floating Fastener【1-1,000 Pieces Per Package】
SEL JAPAN
Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.- Volume Discount
Configure nowStarting from∗ ： 1.48 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Threaded inserts solid body (K0400)
KIPP
· For use where threaded holes have been drilled too large or drill hole spacings have not been observed
· Enables tapped holes which have been damaged to be used again or repaired
· Suitable for use in various materials
· Quick and easy installation
· No other special tools are needed besides the assembly tool- 2D / 3D CAD data available
Configure nowStarting from∗ ： 14.02 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Iron, Ensat, Small Outside Diameter Slotted Type 303
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
Configure nowStarting from∗ ： 0.67 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ensat, Chip-Free / Long, Type 338
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
Configure nowStarting from∗ ： 1.06 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Iron, Ensat, with Pin / Long Type 318
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.Configure nowStarting from∗ ： 5.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Ensat, Chip-Free / Short, Type 337
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
Configure nowStarting from∗ ： 0.87 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Iron, Ensat Small Outside Three-Hole / Long348 Type
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
Configure nowStarting from∗ ： 1.20 € Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Application |
| Material |
| Screw Type |
| Screw Dia. M (after insertion)(mm) |
| Thread Dia. (After inserted), Unified(inch) |
| Length L (after insertion) (D = Thread Dia. M) |
| Notch |
| Shape |
| Sales Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | KIPP | KKV | REYHER | KIPP | KKV | KIPP | KIPP | KKV | KKV | KIPP | KKV | SEL JAPAN | KIPP | KKV | KKV | KKV | KKV | KKV |
| Product Series | |||||||||||||||||||
| CAD |
|
|
|
|
|
|
| ||||||||||||
| Starting from∗ | 1.20 € *Unit price with basic configuration Volume Discount | 0.36 € *Unit price with basic configuration | 0.61 € *Unit price with basic configuration Volume Discount | 0.45 € *Unit price with basic configuration Volume Discount | 3.69 € *Unit price with basic configuration | 0.89 € *Unit price with basic configuration Volume Discount | 0.51 € *Unit price with basic configuration | 3.69 € *Unit price with basic configuration | 0.93 € *Unit price with basic configuration Volume Discount | 0.82 € *Unit price with basic configuration Volume Discount | 1.38 € *Unit price with basic configuration | 1.20 € *Unit price with basic configuration Volume Discount | 1.48 € *Unit price with basic configuration Volume Discount | 14.02 € *Unit price with basic configuration | 0.67 € *Unit price with basic configuration Volume Discount | 1.06 € *Unit price with basic configuration Volume Discount | 5.73 € *Unit price with basic configuration | 0.87 € *Unit price with basic configuration Volume Discount | 1.20 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | 4 Days | Same day | 3 Days | 4 Days | 6 Days | 4 Days | 4 Days | 6 Days | Same day | 4 Days | 6 Days | Same day | 4 Days | Same day | Same day | 6 Days | Same day | Same day |
| Specifications |
| ||||||||||||||||||
| Type | Self-Tapping | - | Self-Tapping | - | - | Self-Tapping | - | - | Self-Tapping | Self-Tapping | - | Self-Tapping | Swaged | - | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping |
| Application | Light Metal | - | - | - | - | - | - | - | - | - | - | - | Light Metal | - | - | - | - | - | - |
| Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Screw Type | Metric (Coarse) Thread | - | Metric (Coarse) Thread | - | - | Unified (Coarse) Thread / Unified (Fine) Thread / BSW (Coarse) Thread | - | - | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread |
| Screw Dia. M (after insertion)(mm) | 3 ～ 12 | - | 2.5 ～ 30 | 3 ～ 12 | - | - | - | - | 3 ～ 16 | 3 ～ 16 | - | 4 ～ 16 | 3 ～ 4 | - | 3 ～ 10 | 3 ～ 16 | 4 ～ 16 | 3 ～ 10 | 4 ～ 12 |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | 1/2 ～ No. 10 | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length L (after insertion) (D = Thread Dia. M) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Notch | Not Provided | - | - | - | - | Not Provided | - | - | - | - | - | - | Not Provided | - | - | - | - | - | - |
| Shape | Slotted | - | Slotted | - | - | Slotted | - | - | 3-Hole Type | 3-Hole Type | - | Small O.D. 3-Hole Type | - | - | Small O.D. Slotted Type | Tip Free Type | With Pin Type | Tip Free Type | Small O.D. 3-Hole Type |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | - | - | Low Quantity (Available beginning with 1 pc.) | - | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | - | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) | - | - | Low Quantity (Available beginning with 1 pc.) | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Application
- Light Metal
- Cast Iron
- Resin General
-
Material
- Steel
- Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)
- Stainless (EN 1.4401 Equiv.)
- Stainless Steel (EN 1.4016 Equiv.)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nitrox 60
- Aluminum
- Nylon
- Stainless steel
-
Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
- BSW (Coarse) Thread
-
Screw Dia. M (after insertion)(mm)
-
Thread Dia. (After inserted), Unified(inch)
-
Length L (after insertion) (D = Thread Dia. M)
-
Notch
-
Shape
-
Sales Unit
Brand
-
- KKV (10)
- KIPP (6)
- REYHER (1)
- SEL JAPAN (1)
- NIPPON SPREW (0)
- ACCURATE (0)
- TSUGAMI (0)
- HIROSUGI-KEIKI (0)
- KS SANGYO (0)
- BOHSEI (0)
- GANTER (0)
- TOKAI METAL INDUSTRY (0)
- ESCO (0)
- RECOIL (0)
- SUNCO (0)
- JAPAN DRIVE-IT (0)
CAD data type
-
- 2D
- 3D
Categories related to Thread Inserts
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.