- Outer Diameter (D)(φ)
- 4
- 6
- 8
- 10
- 12
- R Size(mm)
- 0.813
- 1.219
- 1.625
- 2.031
- 2.438
- Flute Length (ℓ)(mm)
- 8
- 10
- 16
- 20
- 24
- Overall Length (L)(mm)
- 80
- 120
- 135
- 150
- 160
- Shank Diameter (d)(mm)
- 6
- 8
- 10
- 12
- Length Under Neck (ℓ1)(mm)
- 35
- 70
- 85
- 100
- 108
- Est. shipping days
- All
- Within 5 working days
TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model
Mouse over image to enlarge
Part number:
possible part numbers found.Outline drawing
Part number list
| Part number |
|---|
Unit price (excluding VAT)(Unit price including VAT) | Standard shipping days |
|---|
96.97 € ( 115.39 € ) | 5 working days |
133.19 € ( 158.50 € ) | 5 working days |
102.25 € ( 121.68 € ) | 5 working days |
196.98 € ( 234.41 € ) | 5 working days |
262.37 € ( 312.22 € ) | 5 working days |
More Information
Basic information
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.
Specifications and price
Specifications
Model Number
TSC-MCR-LS-HFEM4S (4 Flutes)
| Outer Diameter D |
Shoulder Radius R1 |
Base Radius R2 |
Approximate R-Value | Flute Length ℓ |
Under Neck Diameter d1 |
Length Under Neck ℓ1 |
Overall Length L |
Shank Diameter d |
Figure |
| 4 | 0.5 | 4 | 0.813 | 8 | 3.8 | 35 | 80 | 6 | 1 |
| 6 | 0.5 | 9 | 1.219 | 10 | 5.7 | 70 | 120 | 6 | 1 |
| 8 | 1 | 12 | 1.625 | 16 | 7.6 | 85 | 135 | 8 | 2 |
| 10 | 1.5 | 15 | 2.031 | 20 | 9.5 | 100 | 150 | 10 | 2 |
| 12 | 1.5 | 18 | 2.438 | 24 | 11.5 | 108 | 160 | 12 | 2 |
For Cutting Conditions, Refer to >>Click here.
Features and usage examples
More Information
● The shoulder R and base R composite radius eliminate the medium finishing process by (1), enabling high-speed feeding due to thin chippings when bottom-surface machining, and by (2), minimizing the cusp height (leftover) when machining lines at the same height.
● The long neck models not only avoid tool interference, but can also achieve increased efficiency when machining deep grooves.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it yields a high oxidation resistance temperature and high hardness. Ideal for high speed machining and dry machining of anything from raw carbon steel materials to heat-treated / high hardness steel.
[ ! ]This product has a special groove shape with a performance that may not be reproducible without the use of Misumi's dedicated re-grinding. 