8 Series / Three-Sided Extrusion End Caps for Corners

Click image to view enlarged image

CatalogP.2-678

Part number:

HFCK8-4040-B

Outline drawing and specifications table
Part number list
More Information
Catalog

Outline drawing and specifications table

HFCK8−4040
[ ! ] The pin shape and numbers of extrusion caps may be changed to prevent caps from easily falling off.

Material: Polyamide

Specification Table

Part Number

HFCK8−4040−B

Part Number	Color	Accessory	Applicable Extrusion^*
HFCK8−4040	B (Black)	HFBMB5−15	8−4040

* For Aluminum Extrusion EFS Series, the same extrusion end caps as of HFS Series can be used.

App. Example

[Before
Mounting] [After
Mounting]
[ ! ] Tapping on extrusion is not required.

Technical Information

Making the extrusion and the extrusion end cap flat
The length of the aluminum extrusion is shortened to compensate for the thickness of the extrusion end cap.

[Example: Bracket connection: When connecting with a length of 300 mm on each side]
A: Protrudes by the thickness of the extrusion end cap
Specify the part number as HFS6-3030-300 with a length of 300 mm.

B: The extrusion end cap does not protrude and becomes flat
Specify the part number as HFS6-3030-294, which is shorter by the thickness of the extrusion end cap.

8 Series (Slot Width 10 mm) - Three-Sided Caps for Corners for 40 Square Aluminum Extrusions Related Image 1_Technical Information

[Example: Screw Joint Connection: When connecting with a length of 300 mm per square]
C: Protrudes by the thickness of the extrusion end cap
Specify the part number HFS6-3030-300-RCV-LCV, a length of 300 mm, and the wrench holes on the left and right.

D: The extrusion end cap does not protrude and becomes flat
Specify the part number HFS6-3030-294-RCV-LCV-FR-FL , the extrusion to be shorter by the thickness of the extrusion end cap, and the wrench hole and wrench hole movement to the left and right.