Advanced automation and robotics

This is where MISUMI components are used

All depicted elements can be found here:

No. Product Image Top Highlights
1 Posts
  • Available square circular and hex fully configurable
  • Stainless steel available
 Configure
2 Locating pins
  • Over 40 different pin types
  • Ø in up to 0.01mm steps
  • different tip types selectable
 Configure
3 Linear shafts
  • Endforms selectable
  • Surface treatment possible
  • Diameter from 3 - 100mm
 Configure
4 Shaft supports
  • Surface treatment possible
  • Different shaft fastening types selectable
  • Different shapes selectable
 Configure
5 Bearings with housings
  • Different surface treatments available
  • Double or single bearings
  • Bearing diameter from 3 - 50mm
 Configure
6 Linear bushings
  • Different flange types available
  • Length from 10 - 300mm available
  • Surface treatment possible
 Configure
7 Oil free bushings
  • Basic bodies, designs to choose from
  • Mounting section, designs to choose from
  • Mounting section diameter or nominal diameter to choose from
 Configure
8 Ball screw
  • Screw diameter from 6 to 32 mm and lead from 1 to 32 mm
  • 4 accuracy grade from C10 to C3 (with preload)
  • Dedicated units for support and fixed side
 Configure
9 Spline shaft
  • Configurable shaft ends machining
  • Available also in stainless steel
  • Straight and flange nut type
 Configure
10 Angle plates
  • 10 different types
  • Material selection possible
  • Drilling processing selectable
  • Configurable
 Configure
11 Shaft couplings
  • Allowable torque from 0.05 - 50000Nm
  • Different body materials available
  • Max rotational speed from 100 - <78001 r/min
 Configure
12 Plungers, Index plungers
  • 4 types of Plungers / Index plungers
  • Tip Heat Treatment
  • Plunger Accessories available
 Configure
13 Washers
  • Over 184 different types
  • 17 different shapes
  • Diameter 1-436mm selectable
  • Thickness 0.15 - 30mm selectable
 Configure
14 Screws, Bolts
  • Over 200 types of knobs
  • Usage for various applications
  • Various forms selectable
 Configure
15 Rollers
  • Over 50 different types
  • Configurable
  • Length between 5 – 506mm
  • Material selection possible
 Configure
16 Aluminum extrusions
  • 5 different extrusion series with more than 50 size
  • Configurable length from 50 - 4000 mm
  • Different aluminum alloys already with surface treatment
 Configure
17 Perforated metals, Fences, Nets, Panels
  • Different categories available
 Configure
18 Cam followers, Roller followers
  • Over 60 Cam / Roller Followers available
  • Roller Width from 3 - 76mm
  • Chose between spherical & cylindrical outer ring
 Configure
19 Clamping knobs
  • Basic bodies, designs to choose from
  • Mounting section, designs to choose from
  • Mounting section diameter or nominal diameter to choose from
 Configure
20 Clamping levers
  • 188 different types available
  • 22 different body surface treatment avilable
 Configure
21 Handles
  • Surface design, category can be determined
  • Basic body design to choose from
  • U shape to choose from
 Configure