Parts for Positioning & Clamping

Components for your application

back to powertrain
No. Product Image Top Highlights
Positioning & Clamping
1 Clamps
  • 7 different types of clamps available
  • Tightening force from 1 - 16000N
  • Different screw materials selectable
 Configure
2 Workpiece Clamps
  • 5 different types of clamps available
  • Clamping of parts with internal bore possible
  • Optional components available
 Configure
3 Locating Pins, Bushings
  • Over 40 different pin types
  • Ø in up to 0.01mm steps
  • different tip types selectable
 Configure
4 Stop Pins, Stopper Blocks
  • Over 15 different types
  • Tip shape selectable
  • Material selection possible
 Configure
5 Adjusting Screws, Threaded Stopper Blocks
  • 11 types of adjusting screws
  • 18 types of threaded stopper blocks
  • Search by specifying spec./dim.
 Configure
6 Locating Units
  • 12 types of Locating units
  • Different kinds of Feed Fingers available
 Configure
7 Plungers, Index Plungers
  • 4 types of Plungers / Index plungers
  • Tip Heat Treatment
  • Plunger Accessories available
 Configure
8 Locating and Guide Components
  • Guide Plates with surface treatment orderable
  • NAAMS components available
  • 6 different Locating block sets
 Configure
Pneumatics
1 Pneumatic Slide Cylinders
  • Stroke from 5 - 60mm
  • Max. load mass up to 4.9kg
  • Table parallelism from 0.02 - 0.04µm
 Configure
2 Air Cylinders
  • 3 types of Air cylinders
  • Stroke from 5 - 500mm
  • Single acting or double acting cylinder opreation
 Configure
3 Sensors for Cylinders
  • 4 types of sensors
  • Usage e.g. for PLC
 Configure
4 Air Gripper/ Parallel Type
  • Stroke of 4 or 6mm
  • Double acting or single acting
 Configure
Inspection & Support
1 Posts, Strut Clamps, Stands
  • Choose between 3 kind of Stands
  • Free Guide Arms available
  • Accessories available
 Configure
2 Welded Standoffs
  • 3 different types
  • Surface treatment selectable
  • Drilling position configurable
 Configure
3 Manual Stages
  • Table size and load capacity configurable
  • Flexible tolerances
  • Positioning stages with different axis constellations
 Configure
4 Mounting Plates & Brackets
  • Over 100 different types
  • Material selection possible
  • Surface treatment selectable
 Configure
5 Angle Plates
  • 10 different types
  • Material selection possible
  • Drilling processing selectable
 Configure
6 Simplified Adjustment Units
  • X-, XY-, Z-Axis available
  • Table size configurable
  • Load capacities from 1 < 100N
 Configure
7 Urethane, Rubber, Sponge, Felt - Round Shape
  • 27 round shaped variants
  • 20 hardnesses available
 Configure Download catalogue PDF, 3.2 MB
8 Urethane, Rubber, Sponge, Felt - Sheets
  • Over 120 different types
  • Thickness from 0.5 - 50mm
  • With or without adhesive
 Configure
9 Springs
  • 3 different types of springs
  • ISO 10243 springs available
 Configure

Choose from over 20 million products in our shop


Explore now