Parts for CARTESIAN ROBOTS

back to robotics
No. Product Image Top Highlights
Mechanical components
1 Ball screws
  • Screw diameter from 6 to 32 mm and lead from 1 to 32
  • 4 accuracy grade from C10 to C3 (with preload)
  • Dedicated units for support and fixed side
 Configure
2 Spline shafts
  • Configurable shaft ends machining
  • Available also in stainless steel
  • Straight and flange nut type
 Configure
3 Linear shafts
  • Endforms selectable
  • Surface treatment possible
  • Diamter from 3 - 100mm
 Configure
4 Connecting parts
  • 6 different categories of connecting parts
  • Surface treatment possible
 Configure
5 Linear guides
  • 35 types of linear guides available
  • Rail Length from 25 - 1960mm
  • Linear Guide Accessories available
 Configure
6 Rotary Shafts / Drive Shafts
  • End shapes selectable
  • Shaft diameter from 2 - 50mm
  • Stainless steel available
 Configure
7 Shaft Couplings
  • 6 different categories of shaft couplings
  • Torque range from 0.05 - 100 Nm
  • Different materials selectable
 Configure
8 Keyless bushings
  • 6 types available
  • Shaft bore diameter from 4 - 220mm
  • Surface treatment available
 Configure
9 Locating Pins
  • Over 40 different pin types
  • Ø in up to 0.01mm steps
  • different tip types selectable
 Configure
10 Aluminum extrusions & accessories
  • 10 Extrusion types selectable
  • Different surface treatments available
  • Extensive offer of various joint parts
 Configure
11 Racks
  • System racks available
  • Accessories available
 Configure
Sensors & Vision System
1 Proximity sensors
  • Detection distance selectable
  • Can be used in different operating environments
  • Detection head size selevtable
 Configure
2 Photoelectric sensors
  • Accessories available
  • Detection targets selectable
  • 4 types of detection light
 Configure
3 Temperature sensors
  • Heat resistancy up to 750°C
  • Length configurable
  • Different fixations selectable
 Configure
4 Pressure sensors
  • Up to 600 bar
  • Several connection types available
  • Output selectable
 Configure
5 Vision system / Lens
  • 3 types of lenses available
 Configure
Drive Systems
1 Actuators
  • Lead from 2 - 30mm
  • Up to 1875 mm/sec
  • Different driving methods available
 Configure
2 Gearboxes
  • Mounting division selectable
  • Shaft diameter from 3 - 85mm
  • Gear type selectable
 Configure
Electric
1 Cable Carriers
  • available for different applications
  • height of inside configurable from 5 to 48.5 mm
 Configure
Final Effectors
1 Hands grippers & Finger for Grippers
  • Gripping force selectable
  • Number of fingers selectable
  • Surface treatment can be chosen
 Configure
2 Gripper accessories
  • 10 types of accessories available
 Configure
3 Suction cups
  • 9 different pad types available
  • Mounting methods can be chosen
  • Vacuum outlet port selectable
 Configure
back to robotics