Parts for jigs and measurement fixtures

Components for your application

back to body-in-white
No. Product Image Top Highlights
Mechanical components
1 Locating pins according Daimler Standard (D> 24)
  • With DLC rainbow coating – avoids cold welding at alumina products
  • With WSR coating - protection from welding spatters and high wear resistance
  • Over 30 different pin types
  • Ø (24.01-40.00) in up to 0.01mm steps configurable
 Configure
2 Locating pins according Daimler Standard (D≤ 24)
  • With DLC rainbow coating – avoids cold welding at alumina products
  • With WSR coating - protection from welding spatters and high wear resistance
  • Over 30 different pin types
  • Ø (7.00 - 24.00) in up to 0.01mm steps configurable
 Configure
3 Locating pins according VW Standard
  • With DLC rainbow coating – avoids cold welding at alumina products
  • With WSR coating - protection from welding spatters and high wear resistance
  • Over 30 different pin types
  • Ø (5.00 - 42.00) in up to 0.05mm steps configurable
 Configure
4 Locating pins according BMW Standard
  • With DLC rainbow coating – avoids cold welding at alumina products
  • With WSR coating - protection from welding spatters and high wear resistance
  • Over 10 different pin types
  • Ø (5.00 - 40.00) in up to 0.05mm steps configurable
 Configure
5 NAAMS Locating pin
  • Over 29 different pin types
  • Configurable
  • Length between 10-100mm
  • 5 different tip types selectable
 Configure
6 NAAMS pin retainer
  • Over 7 different types
  • Black oxide possible
  • Stainless / non stainless configurable
  • 0.01mm tolerance range possible
 Configure
7 L-shaped angles
  • Over 20 different types
  • Material selection possible
  • Configurable
  • Tolerance range between ±0.25 until ±0.8
 Configure
8 NAAMS L-shaped angles
  • 8 different types
  • Configurable
  • Up to 4 holes possible
  • Very low tolerance range possible
 Configure
9 NAAMS NC-block
  • 8 different types
  • Configurable
  • Up to 4 holes possible
  • Very low tolerance range possible
 Configure
10 NAAMS Rough locators
  • 6 different types
  • 3 different forms selectable
  • Length between 65-320mm
  • With plastic guide configurable
 Configure
11 Rectangular shims
  • 8 different types
  • Material selection possible
  • Thickness from 0.1mm
  • Notched Hole Pitch configurable
 Configure
12 Aluminium extrusions
  • Over 100 different types
  • 9 different profile versions
  • Number of Extrusion Slots configurable
  • Degree of torsional stiffness configurable
 Configure
13 Stop pins and stopper blocks
  • Over 15 different types
  • Tip shape selectable
  • Material selection possible
  • Various dimensions configurable
 Configure
14 Mounting plates & brackets
  • Over 100 different types
  • Material selection possible
  • Surface treatment selectable
  • Configurable
 Configure
15 Angle plates
  • 10 different types
  • Material selection possible
  • Drilling processing selectable
  • Configurable
 Configure
16 Welded standoffs
  • 3 different types
  • Configurable
  • Surface treatment selectable
  • Drilling position configurable
 Configure
17 Magnets
  • Over 30 different types
  • Configurable
  • Attraction force configurable
  • Material selection possible
 Configure
18 Dowel pins, spring pins, stepped pins
  • Over 70 different types
  • Very low tolerance range possible
  • Fit with interference selectable
  • Length between 5 – 140mm
 Configure
19 Linear Guides
  • 35 types of linear guides available
  • Rail Length from 25 - 1960mm
  • Linear Guide Accessories available
 Configure
20 Simplified Adjustment Units
  • X-, XY-, Z-Axis available
  • Table size configurable
  • Load capacities from 1 < 100N
 Configure
21 Plungers, Index Plungers
  • 4 types of Plungers / Index plungers
  • Tip Heat Treatment
  • Plunger Accessories available
 Configure
22 Manual Stages
  • Table size and load capacity configurable
  • Flexible tolerances
  • Positioning stages with different axis constellations
 Configure
23 Urethane, Rubber, Sponge, Felt - Round Shape
  • 27 round shaped variants
  • 20 hardnesses available
 Configure Download catalogue PDF, 3.2 MB
Pneumatic and hydraulic components
1 Cylinders with twin guides
  • Cylinder diameter configurable
  • stroke configurable
  • bearing type configurable
  • 73 different variants
 Configure
2 Pneumatic cylinders ISO 15552 (ex ISO 6431)
  • cylinder diameter configurable
  • stroke configurable
  • according ISO 15552 (ex ISO 6431)
  • 119 different variants
 Configure
3 Compact cylinders
  • cylinder diameter configurable
  • stroke configurable
  • thread configurable
  • 642 different variants
 Configure
4 Small cylinders/tip shape selectable
  • cylinder diameter configurable
  • Stroke configurable
  • thread configurable
  • Tip Shape Selectable
 Configure
5 Retractable locating pin unit
  • Cylinder diameter of 40-60mm
  • Stroke of 40-60mm
  • Typical locating Pin unit from the automotive industry
  • For pneumatic use
 Configure
6 Locating cylinder
  • Slat side force of 80-200N selectable
  • Piston diameter of 30-63mm selectable
  • Typical locating Pin unit from the automotive industry
  • For pneumatic use
 Configure
7 Rotary clamp cylinders
  • tube diameter configurable
  • Stroke configurable
  • Rotating Direction
  • 8 different variants
 Configure
8 MIXED threaded valves
  • Number of Solenoids selectable
  • Tube thread selectable
  • 6 different variants
  • For pneumatic use
 Configure
9 One-Touch couplings
  • Connection type selectable
  • Scope of application selectable
  • Body material selectable
  • over 550 variants
 Configure
10 Speed governor
  • for different applications
  • Body material selectable
  • Joint type selectable
  • over 70 variants
 Configure
11 Hand valves
  • Plumbing Thread selectable
  • Effective Sectional Area selectable
  • diameter selectable
  • over 30 variants
 Configure
12 Check valves
  • Base material selectable
  • Seal material selectable
  • Connection type selectable
  • over 19 variants
 Configure
13 Manual switching valves
  • Main body shape selectable
  • Number of ports selectable
  • Connection diameter selectable
  • over 20 variants
 Configure
14 High speed exhaust valves
  • Type selectable
  • Base material selectable
  • Seal material selectable
  • over 17 variants
 Configure
15 Tubes
  • Type selectable
  • Outer diameter selectable
  • Internal diameter selectable
  • Material selectable
 Configure
16 Flow control valve
  • suitable for hydraulic oil
  • Connection selectable
  • Max. flow per min. selectable
  • massive valve unit
 Configure
17 Hydraulic hoses
  • Max. Operating Pressure (Mpa) selectable
  • Suitable for water and hydraulic oil (selectable)
  • Connection selectable
  • internal diameter selectable
 Configure Download catalogue PDF, 1,002.4 KB
18 Hydraulic hose adaptors
  • Shape selectable
  • Stainless steel selectable
  • Connection type selectable
  • over 20 variants
 Configure
Sensoric
1 Proximity sensors
  • Detection distance selectable
  • can be used in different operating environments
  • Detection head size selectable
  • for different test objects
 Configure
2 Components for proximity sensors
  • over 5 variants
  • Thread selectable
  • diameter selectable
  • Length selectable
 Configure
3 Brackets for photoelectric sensors
  • different products can be combined
  • Length selectable
  • for different diameter
  • Over 9 different types selectable
 Configure
4 Sensor rails
  • over 20 different variants
  • hole position configurable
  • material selectable
  • Surface treatment selectable
 Configure
5 Sensor flags
  • over 18 different variants
  • diameter selectable
  • Thread selectable
  • Slit angle (depending on the model) configurable
 Configure

Choose from over 20 million products in our shop


Explore now