High-tech standalone devices

This is where MISUMI components are used

All depicted elements can be found here:

No. Product Image Top Highlights
1 Clamping knobs
  • Basic bodies, designs to choose from
  • Mounting section, designs to choose from
  • Mounting section diameter or nominal diameter to choose from
 Configure
2 Clamping levers
  • Application to choose from
  • Form to choose from
 Configure
3 Handles
  • Surface design, category can be determined
  • Basic body design to choose from
  • U shape to choose from
 Configure
4 Hinges
  • Four different hinge types (flat, detachable, flag, long)
  • More than 60 different product families
  • Over 20 product families in stock
 Configure
5 Ball screw
  • Screw diameter from 6 to 32 mm and thread pitch from 1 to 32 mm
  • Four accuracy classes from C10 to C3 (with pre-stressing)
  • Special fixed bearing housing
 Configure
6 Linear actuators
  • Different categories available
 Configure
7 Aluminum extrusions
  • Reference frame width to choose from
  • Profile design can be determined
  • Profile size to choose from
 Configure
8 Sensors
  • Different categories available
 Configure
9 Screws, Bolts
  • Different categories available
 Configure
10 Standard linear guides
  • Number of guide carriages to choose from
  • Rail length can be determined
  • Rail width to choose from
 Configure
11 Linear shafts
  • Standard designs to choose from
  • End forms left/right can be determined
  • Shaft diameter selectable 
 Configure
12 Linear bushings
  • Inner contact, circle diameter (Ø) can be determined
  • Total length to choose from
  • Designs to choose from
 Configure
13 Shaft supports
  • Mounting design to choose from
  • Hole diameter to choose from
  • Different materials available
 Configure
14 Timing belts, Pulleys MISUMI Timing Belts
  • Different categories available
 Configure
15 Switches
  • Different categories available
 Configure
16 Plungers, Index plungers
  • Different categories available
 Configure
17 Stopper bolts
  • Different products available
 Configure
18 Locating pins
  • Inlet side, tip shape to choose from
  • Various designs available
  • Surface treatment to choose from
 Configure
19 Perforated metals, Fences, Nets, Panels
  • Different categories available
 Configure