ideanote
inCAD Library

Make sure to read this before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. MISUMI reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

Features of inCAD Library

  1. Get great new design ideas for these application examples.
  2. Over 200 design application ideas collected from dozens of industries!

  3. Find application examples quickly! Search by function, workpiece shape, etc.

  4. Download the CAD models for each application example.
  5. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! Button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Back to top

inCAD Library Keyword Search
inCAD Library No. Search

No.000050 Adjustment Mechanism

Adjusting the angle at the offset center point

Related Category

Adjusting Bolts

Product name Adjusting Bolts/Knurled Knobs
Part number AJSTKS6-50
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Effective for Precise Adjustment Manually

Back to page top

Available sizes

■Adjusting Bolts, Knurled Knobs

Screw Type Material Surface Treatment
Coarse Thread EN 1.1191 Equiv. Black Oxide
Electroless Nickel Plating
EN 1.4301 Equiv. -

■Sizes and Dimensions

Screw Dia.
(coarse)
Thread Length
(5mm increments)
Block Bearing Part Knob
Diameter Length Thickness O.D.
M3 10 ~ 20 Ø2.5 7 4 Ø16
M4 10 ~ 30 Ø3.5
M5 10 ~ 40 Ø4.5 9 6 Ø20
M6 15 ~ 50 Ø5.5
M8 20 ~ 50 Ø7.5 12

Back to page top

Accuracy Info

■Accuracy of the Adjusting Bolts

Block Support
Shaft Dia. Tolerance: -0.1/-0.2
Length Tolerance: +0.2/+0.1
Surface Roughness: Ra1.6

Back to page top

Blocks for Adjusting Bolts

Product name Blocks for Adjusting Bolts/Standard Type
Part number AJKCM6-30
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Effective for Precise Adjustment Manually

Back to page top

Available sizes

■Blocks for Adjusting Bolts, H Selectable

Screw Type Material Surface Treatment
Coarse Thread EN 1.1191 Equiv. Black Oxide
Electroless Nickel Plating
EN 1.4301 Equiv. -

■Sizes and Dimensions

(applicable bolt screw dia.) Bolt Bearing Slot Width Center Height [H] Overall Height
([H] + listed below)
Overall Thickness Overall Width
5 6 8 10 12 15 20 25 30
M3 2.5 5 7 26
M4 3.5
M5 4.5 6 9 32
M6 5.5
M8 7.5 8 12 38
M10 9.5 10 16 50
M12 11.5 11 19 65
M16 15.5

Back to page top

Accuracy Info

■Accuracy of Blocks for Adjusting Bolts

Slot Width Tolerance: +0.1/0

Overall Thickness Tolerance: 0/-0.2

Back to page top

Scale Plates

Product name Scale Plates
Part number MEPCSH-LC48-HC
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Because a scaled plate is available without having to perform troublesome tasks as preparation works on a plate

Back to page top

Available sizes

■Scale Plates (Horizontal,EN 1.4301 Equiv.)

Width Scale Type Material Plate Thickness Length
8 Zero at Left EN 1.4301 Equiv. 0.5 100 ・ 200
Zero at Right 100 ・ 200
Center Divided 300
12 Zero at Left 100 ・ 200
Zero at Right 100 ・ 200
Center Divided 300

* Adhesive tapes are not provided.
Use the Ø3.4 x 2 screw mounting holes (5mm from the both ends).
* Length cut is available as alterations.

Back to page top

IDEA NOTE Angle adjustment mechanism utilizing a screw

By tightening and loosening a screw, the angle is easily adjusted.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Back to top

  • * Unit assembly CAD data consists of some sub-assemblies.
       Each sub-assembly unit can be used as it is or can be edited.

Application Overview

Purpose

  • Purpose
    • To be mounted on a loader, etc., and to adjust the inclination angle of a dispenser for adhesive application.
  • Operation
    • By loosening the rotary plate fixing bolt and turning the adjusting bolt, the inclination angle of the dispenser is adjusted.

Points for use

  • Manual angle adjustment.

Target workpiece

  • Shape: circuit board
  • Size: W65 x D20 x t1.6mm
  • Weight:5g

Design Specifications

Operating Conditions or Design Requirements

  • Dispenser inclination angle adjustment: 45°±8° (37° to 53°)
  • Outer dimensions: W123 x D120 x H56mm

Required Performance

  • Depends on the positioning accuracy of the loader, etc.

Selection Criteria for Main Components

  • Cam Follower
    • A cam follower (CFFRS6-16) that has an outer ring thickness suitable for pressing the rotary plate (thickness: 13mm) and a size small enough to be mounted on this mechanism is selected.

Design Evaluation

Verification of main components

  • Verify that the rotary arm and adjusting bolt can create the required inclination angle resolution.
  • Calculation of resolution of angle adjustment mechanism.
    • Conditional value: adjustable angle θ = 8°, adjusting bolt thread diameter M6, pitch of M6 thread P = 1mm, movable range of adjusting nut L = 16.4mm, distance between rotation center of rotary arm and adjusting bolt (rotary arm length) R = 117mm
    • As the resolution at center of adjustment range: Δθ1, and the travel distance per rotation of adjusting bolt = pitch of M6 thread P = 1, sinΔθ1 = P/R = 1
      Δθ1 = sin-1(P/R) = sin-1(1/117) = 0.490°/rotation
    • Where resolution at adjustment range limit: Δθ2, angle formed by rotary arm and adjustment range center : α, distance between adjusting nut and adjustment range center: L = 16.4, angle at center formed by rotary arm adjustment range center and arm travel made when adjusting bolt is rotated one revolution: β, as α - β = Δθ2 and sinα = L/R, sinβ = (L - P)/R,
      Δθ2 = α - β = sin-1(L/R) - sin-1((L - P)/R) = sin-1(16.4/117) - sin-1((16.4 - 1)/117) = 8.0578 - 7.5634 = 0.494°/rotation

Other Design Consideration

  • Applying a preload to the cam follower on the pushing side ensures the adjustment mechanism will not have backlash in the radial direction.

Part List

No. Part Name Sample picture MISUMI Part Number
For Price and Days to ship click on Part No.
Quantity
1 Cam Followers CFFRS6-16 4
2 Adjusting Bolts AJSTKS6-50 1
3 Blocks For Adjusting Bolts AJKCM6-30 1
4 Metal Washers FWSBB-D10-V5.5-T2 1
5 Miniature Couplings SRTN6N 1
6 Point Plate MEPCSH-LC48-HC 1
  • The part list above contains only MISUMI parts.
    The list of parts and machined products of other manufacturers than MISUMI can also be downloaded by part list download (CSV).
  • You will find information on price and shipping days, in the Online Quote and Order System.
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Back to top

Back to top