- inCAD Library Home
- > No.000308 Sheet Forming Machine
No.000308 Sheet Forming Machine
72
72
Simplified bending/forming machine
Related Category
Shaft Supports
| Product name | Shaft Supports/Flanged Mount/Thick Sleeve |
|---|---|
| Part number | STHR20 |
| Features | Tapped Mounting Hole Type recommended when mounting the supports to thin plates |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Select the long sleeve to support a long shaft.
Available sizes
■Shaft Supports - Flanged Mount with Thick Sleeve
| Material | Surface Treatment |
|---|---|
| EN 1.1191 Equiv. | Black Oxide |
| Electroless Nickel Plating | |
| EN 1.4301 Equiv. | - |
| EN AW-6061 Equiv. | Clear Anodize |
■Sizes and Dimensions
| Shaft Bore Dia. | Overall Length | Guide O.D. | Flange O.D. |
|---|---|---|---|
| 3 | 10 | 8 | 22 |
| 4 | 10 | 9 | 24 |
| 5 | 12 | 10 | 25 |
| 6 | 15 | 12 | 28 |
| 8 | 16 | 12 | 28 |
| 10 | 20 | 14 | 30 |
| 12 | 24 | 16 | 36 |
| 13 | 18 | 38 | |
| 15 | 30 | 20 | 40 |
| 16 | 32 | 22 | 42 |
| 18 | 28 | 50 | |
| 20 | 28 | 50 | |
| 25 | 38 | 33 | 55 |
| 30 | 38 | 66 | |
| 35 | 50 | 45 | 80 |
| 40 | 60 | 90 | |
| 50 | 70 | 100 |
Accuracy Info
■Accuracy of Shaft Supports
| Shaft Bore Dia. | Tolerance (H7) |
|---|---|
| 3 | +0.010 0 |
| 4 | +0.012 0 |
| 5 | |
| 6 | |
| 8 | +0.015 0 |
| 10 | |
| 12 | +0.018 0 |
| 13 | |
| 14 | |
| 15 | |
| 16 | |
| 18 | |
| 20 | +0.021 0 |
| 25 | |
| 30 | |
| 35 | +0.025 0 |
| 40 | |
| 50 |
Perpendicularity of the Mounting Surface and the Shaft Bore: 0.02
Stopper Bolts with Urethane
| Product name | Stopper Bolts with Bumpers/Standard/Straight Shape |
|---|---|
| Part number | SUST8-50 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Selected to avoid shocks when stopping the rotation tip of the rotary actuator.
Available sizes
■Stopper Bolts With Urethane- Standard, Straight Shape
| Stopper | Hex Screw | Accessory (Hex Nut) | ||||
|---|---|---|---|---|---|---|
| Material | Hardness | Material | Strength Class | Surface Treatment | Material | Surface Treatment |
| Urethane (Black) | Shore A90 | EN 1.7220 Equiv. | 10.9 | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
| EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | ||
| Low Repulsion Urethane (Gray) | Shore A70 | EN 1.7220 Equiv. | 10.9 | Bright Chromate Plating | EN 1.0038 Equiv. | Trivalent Chromate |
| Polyacetal (White) | - | EN 1.7220 Equiv. | 10.9 | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
| EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | ||
| Silicon (Light Gray) | Shore A70 | EN 1.7220 Equiv. | 10.9 | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
| EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | ||
■Sizes and Dimensions
| Screw Dia. (Coarse) | Threaded Section Length (Length under Head) |
|---|---|
| M3 | 15 - 40 (Increments of 5) |
| M4 | 15 - 40 (Increments of 5) |
| M5 | 15 - 50 (Increments of 5) |
| M6 | 20 - 50 (Increments of 5), 60 |
| M8 | 20 - 50 (Increments of 5), 60 |
| M10 | 20 - 50 (Increments of 5), 60, 70 |
| M12 | 30 - 70 (Increments of 10) |
Support Units
| Product name | Support Units/Round/Fixed Side |
|---|---|
| Part number | BRW12-SET |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Use for ball screws on the fixed side / support side set to shorten the design time.
Available sizes
■Support Units - Fixed Side, Round
| Material | Surface Treatment | |
|---|---|---|
| Bearing Housing Cover | Collar Bearing Nut | Bearing Housing |
| Cover | ||
| Collar | ||
| Bearing Nut | ||
| EN 1.1191 Equiv. | EN 1.0038 Equiv. | Black Oxide |
| Electroless Nickel Plating | ||
| Low Temp. Black Plating | ||
■Sizes and Dimensions
| Bearing I.D. | Fixed Side Length | Flange Dimension |
|---|---|---|
| 6 | 20 | □28 |
| 8 | 23 | □35 |
| 10 | 29 | □42 |
| 12 | □44 | |
| 15 | 32 | □52 |
| 20 | 52 | □68 |
| 25 | 57 | □79 |
-
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
- 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances). - 5. Policy of Third Parties
- You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.
CAD Data Download (Unit Assembly)
CAD Data Download: File Format
Cautions on the CAD data
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
The CAD data unit assembly consists of sub-assemblies.
Each sub-assembly unit can be used as it is or can be edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly CAD data consists of some sub-assemblies.
Each sub-assembly unit can be used as it is or can be edited.
Application Overview
Purpose
- To roll the end portion of a resin sheet into a U shape.
Points for use
- After the operator sets a resin sheet on the machining table, pressing the start button (1) clamps the resin sheet, (2) rotates the roll bar by 180° (bending the resin sheet into a U shape), (3) starts leftward travel of the heater at 120mm/2.3 sec, (4) activates the heater ON timer, (5) moves the heater to the right end of the resin sheet, (6) performs heating travel on the resin sheet at 260mm/4.9 sec, (7) makes the heater travel at 20mm/0.4 sec, (8) stops the heater at the left end (stroke end), (9) starts rightward travel of the heater, (10) performs heating travel on the resin sheet, (11) turns the heater OFF (by timer operation), and (12) stops the heater at the right end. Optimum conditions such as heating and air blow performed in combination, heater stop during rightward travel, and air blow travel should be determined through trial and error.
Target workpiece
- Shape: resin film
- Size: 260 x 45 x t0.7mm
Design Specifications
Operating Conditions or Design Requirements
- Sheet clamp stroke: 100mm
- Sheet rotation angle: 180°
- Heater: 1kw
- Heater travel unit stroke: 474mm
- Travel time: 7.5sec (variable speed)
- Outer dimensions: W987 x D455 x H514mm
Required Performance
- Positioning accuracy: ±0.2mm
Selection Criteria for Main Components
- Selection of heater
- Heating temperature of 250°±30° adjustment by room-temperature compressed air blow (through trials and errors)
The hot air blow ON/OFF timing is determined by the timer activated during travel.
Heating time 15sec (in reciprocating operation)
- Heating temperature of 250°±30° adjustment by room-temperature compressed air blow (through trials and errors)
Design Evaluation
Verification of main components
- A motor with a torque that can withstand the load is selected.
- Load of table unit: M = 7kg
Lead of lead screw: L = 0.004m
Drive section efficiency: η = 0.26
Friction coefficient of guide: μ = 0.15
Motor startup torque TM = 0.28N･m
Rotation speed range of speed controller motor: n = 90 to 1400rpm
Motor rotation speed: N = 60 x V/L
= 60 x 53/4
≒ 800rpm
Load: F = μ x M x 9.8
= 0.15 x 7 x 9.8
= 10.3N
Load torque: T = FL/2πη
= 10.3 x 0.004/2 x 3.14 x 0.26
= 0.026N･m
Therefore, T < TM
- Load of table unit: M = 7kg
Other Design Consideration
- A cylinder with a guide is used for sheet clamping to reduce cost.
- For sheet rotation, a stopper is provided on the rotary actuator to make the bending amount adjustable.
- The heater is fixed with screw clamps for facilitating replacement, and as its traveling accuracy and stopping accuracy specifications are rough, lead screws and a small-size speed controller motor are used.
- The temperature of hot air is 450°C at the heater air blow port. To adjust the temperature, it is also equipped with an air blow nozzle.
- The heating time should be determined through trial and error. The heating time is around 15 seconds (reciprocation).
Explore Similar Application Examples
Page
-
/
-
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.