- Shaft Dia. D(mm)
- 6
- 8
- 10
- 12
- 13
- 15
- 16
- 18
- 20
- Thread Dia.
- 4
- 6
- 8
- 10
- 12
- 16
- Material
- Hardness
- Surface Treatment
- Length Configurable
- Screw Length F(mm)
- 7
- 9
- 12
- 16
- 18
- 24
[4-24/1mm units] - Material Detail
- Detailed Hardness
- H(mm)[2-100/0.1mm units]
- L(mm)
- 5
- 6
- 9
- 10
- 12
- 16
- 19
- 22
- 25
[5-25/1mm units] - CAD
- 3D
- Est. shipping days
- All
- Within 3 working days
- Within 8 working days
Screws with collar / hexagon socket with hexagon socket / stepped
Part number:
possible part numbers found.Outline drawing and specifications table
Back to the Category Fulcrum Pins
Technical Drawing - Fulcrum Pins
Open the technical drawing in the new window
Available dimensions and tolerances can be found under the tab More information.
Basic Properties (e.g., material, hardness, coating, tolerance) - Fulcrum Pins
| Type | Material | Surface Treatment | Hardness | |
| Standard | Configurable | |||
| CMSG | FCMSG | EN 1.7220 Equiv. | Black Oxide | 33~38HRC |
| SCMSG | FSCMSG | EN 1.4301 Equiv. | - | - |
Further specifications can be found under the tab More information.
Composition of a Product Code - Fulcrum Pins
| Part Number | - | L | - | H | - | F |
| CMSG15 FSCMSG12 | - - | 16 13 | - - | 20.5 8 | - | 10 |
Alterations - Fulcrum Pins
General Information - Fulcrum Pins
.jpg)
Fulcrum Pins Selection Details
- Material: steel, stainless steel
- Coatings: untreated, burnished
- Heat treatment: induction hardened
- Shaft diameter: 4 mm to 20 mm
- Tolerance class of shaft: -0.01mm/+0.05mm, g6
- Thread diameter: M2.6 to M16
- Drive type: hexagon socket, slot, hexagon, key surfaces
Description/Basics
The screwed connection is one of the method most commonly used for detachable connections. Fulcrum pins, also called rotating bolts, have various advantages over conventional screws due to their hardened shaft.
The head of our rotating bolts is in part flatter than that of a stripper bolt, which, in combination with the various drive forms, simplifies the assembly in tight installation spaces. Similar to stripper bolts, Fulcrum pins have a tight-tolerance shaft that can be additionally hardened. This allows designing a simple bearing or guide.
When designing a swivel lock, a combination of Fulcrum pins and links are recommended. This allows, for example, to lock a solid closure. In this case, the rotary bolt can serve both as a bearing point and as an end stop. Its hardened approach offers suitable protection against premature wear in both functions.
Due to the ability to absorb transverse forces and shear forces, bearing bolts with hardened shoulders are suitable for creating a hinge assembly.
Combined with rod end bearings, there is also the option of balancing an offset.
Application Examples - Fulcrum Pins
Application example - Fulcrum pin utilised as spacer
1.Fulcrum pin, 2. Flat steel, 3. Nuts , 4. Flat steel
Application Example - Fulcrum pin utilised as bearing point
1.Fulcrum pin, 2. Links, 3. Hex nut, 4. Flat steel
Application example - Fulcrum pin utilised as stopper point
1. Fulcrum pin, 2. Links
Industrial Applications
Part number list
| Part number |
|---|
Unit price (excluding VAT)(Unit price including VAT) | Standard shipping days |
|---|
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
- ( - ) | 3 working days |
More Information
Outline and specifications
Back to the Category Fulcrum Screws
Technical Drawing - Fulcrum Pins
Open the technical drawing in the new window
Specification Tables - Fulcrum Pins
| D Tolerance | |
| 6 | -0.004 -0.012 |
| 8, 10 | -0.005 -0.014 |
| 12~18 | -0.006 -0.017 |
| 20 | -0.007 -0.020 |
| Part Number | L Selection | H=0.1mm Increment | A | B | C | E | F | MxP (Coarse) | T | Unit Price | ||||||||||
| Type | Dg6 | CMSG | SCMSG | |||||||||||||||||
| CMSG SCMSG | 6 | 5 | 6 | 9 | 10 | 12 | 2.0~ 50.0 | 10 | 3 | 2 | 5 | 7 | 4x0.7 | 6.5 | ||||||
| 8 | 5 | 6 | 9 | 10 | 12 | 16 | 13 | 5 | 3 | 9 | 6x1.0 | 8.7 | ||||||||
| 10 | 10 | 12 | 16 | 19 | 22 | 25 | 3.0~ 70.0 | 17 | 6 | 4 | 12 | 8x1.25 | 10.8 | |||||||
| 12 | 19 | 12.8 | ||||||||||||||||||
| 13 | 8 | 5 | 6 | 16 | 10x1.5 | 14 | ||||||||||||||
| 15 | 16 | 19 | 22 | 25 | 4.0~ 80.0 | 24 | 10 | 6 | 7 | 18 | 12x1.75 | 17 | ||||||||
| 16 | ||||||||||||||||||||
| 18 | 27 | 7 | 8 | 19 | ||||||||||||||||
| 20 | 4.0~100.0 | 30 | 14 | 24 | 16x2.0 | 21 | ||||||||||||||
| Part Number | L=1mm Increment | H=0.1mm Increment | F=1mm Increment | A | B | C | E | MxP (Coarse) | T | Unit Price | ||
| Type | Dg6 | FCMSG | FSCMSG | |||||||||
| FCMSG FSCMSG | 6 | 5~12 | 2.0~ 50.0 | 4~ 7 | 10 | 3 | 2 | 5 | 4x0.7 | 6.5 | ||
| 8 | 5~16 | 6~ 9 | 13 | 5 | 3 | 6x1.0 | 8.7 | |||||
| 10 | 10~25 | 3.0~ 70.0 | 8~12 | 17 | 6 | 4 | 8x1.25 | 10.8 | ||||
| 12 | 19 | 12.8 | ||||||||||
| 13 | 10~16 | 8 | 5 | 6 | 10x1.5 | 14 | ||||||
| 15 | 4.0~ 80.0 | 12~18 | 24 | 10 | 6 | 7 | 12x1.75 | 17 | ||||
| 16 | ||||||||||||
| 18 | 27 | 7 | 8 | 19 | ||||||||
| 20 | 4.0~100.0 | 16~24 | 30 | 14 | 16x2.0 | 21 | ||||||
Alterations - Fulcrum Pins