• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Locating Pins - Tapered - Shoulder Diameter and Thickness Configurable -, Threaded

Locating Pins - Tapered - Shoulder Diameter and Thickness Configurable -, Threaded

MISUMI

MISUMI

[Features]You can specify shoulder type flange thickness and flange diameter. It is attached with a male thread.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

 
Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
CFPNDT3-P[2-4/0.01]-L[0-6/1]-B[2-10/0.1]-T[1-10/0.5]
CFPNDT4-P[2-5/0.01]-L[0-8/1]-B[2-10/0.1]-T[1-10/0.5]
CFPNDT5-P[3-6/0.01]-L[0-10/1]-B[2-10/0.1]-T[1-10/0.5]
CFPNDT6-P[4-7/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-10/0.5]
CFPNDT8-P[5-9/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-10/0.5]
CFPNDT10-P[7-11/0.01]-L[0-25/1]-B[3-20/0.1]-T[1-10/0.5]
CFPNDT12-P[7-12/0.01]-L[0-25/1]-B[3-20/0.1]-T[1-10/0.5]
CFPNDT16-P[13-16/0.01]-L[0-30/1]-B[5-20/0.1]-T[1-10/0.5]
CFPNDT20-P[16-20/0.01]-L[0-30/1]-B[5-20/0.1]-T[1-10/0.5]
CFPNDTD3-P[2-4/0.01]-L[0-6/1]-B[2-10/0.1]-T[1-15/0.1]-H[6-12/0.5]
CFPNDTD4-P[2-5/0.01]-L[0-8/1]-B[2-10/0.1]-T[1-15/0.1]-H[7-13/0.5]
CFPNDTD5-P[3-6/0.01]-L[0-10/1]-B[2-10/0.1]-T[1-15/0.1]-H[8-14/0.5]
CFPNDTD6-P[4-7/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[9-15/0.5]
CFPNDTD8-P[5-9/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[11-17/0.5]
CFPNDTD10-P[7-11/0.01]-L[0-15/1]-B[3-25/0.1]-T[1-15/0.1]-H[13-19/0.5]
CFPNDTD12-P[7-12/0.01]-L[0-15/1]-B[3-25/0.1]-T[1-15/0.1]-H[13-20/0.5]
CFPNDTD16-P[13-16/0.01]-L[0-20/1]-B[5-30/0.1]-T[1-15/0.1]-H[18-24/0.5]
CFPNDTD20-P[16-20/0.01]-L[0-20/1]-B[5-30/0.1]-T[1-15/0.1]-H[21-27/0.5]
FPNDT3-P[2-4/0.01]-L[0-6/1]-B[2-10/0.1]-T[1-10/0.5]
FPNDT4-P[2-5/0.01]-L[0-8/1]-B[2-10/0.1]-T[1-10/0.5]
FPNDT5-P[3-6/0.01]-L[0-10/1]-B[2-10/0.1]-T[1-10/0.5]
FPNDT6-P[4-7/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-10/0.5]
FPNDT8-P[5-9/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-10/0.5]
FPNDT10-P[7-11/0.01]-L[0-25/1]-B[3-20/0.1]-T[1-10/0.5]
FPNDT12-P[7-12/0.01]-L[0-25/1]-B[3-20/0.1]-T[1-10/0.5]
FPNDT16-P[13-16/0.01]-L[0-30/1]-B[5-20/0.1]-T[1-10/0.5]
FPNDT20-P[16-20/0.01]-L[0-30/1]-B[5-20/0.1]-T[1-10/0.5]
FPNDTD3-P[2-4/0.01]-L[0-6/1]-B[2-10/0.1]-T[1-15/0.1]-H[6-12/0.5]
FPNDTD4-P[2-5/0.01]-L[0-8/1]-B[2-10/0.1]-T[1-15/0.1]-H[7-13/0.5]
FPNDTD5-P[3-6/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[8-14/0.5]
FPNDTD6-P[4-7/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[9-15/0.5]
FPNDTD8-P[5-9/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[11-17/0.5]
FPNDTD10-P[7-11/0.01]-L[0-15/1]-B[3-25/0.1]-T[1-15/0.1]-H[13-19/0.5]
FPNDTD12-P[7-12/0.01]-L[0-15/1]-B[3-25/0.1]-T[1-15/0.1]-H[13-20/0.5]
FPNDTD16-P[13-16/0.01]-L[0-20/1]-B[5-30/0.1]-T[1-15/0.1]-H[18-24/0.5]
FPNDTD20-P[16-20/0.01]-L[0-20/1]-B[5-30/0.1]-T[1-15/0.1]-H[21-27/0.5]
GFPNDT3-P[2-4/0.01]-L[0-6/1]-B[2-10/0.1]-T[1-10/0.5]
GFPNDT4-P[2-5/0.01]-L[0-8/1]-B[2-10/0.1]-T[1-10/0.5]
GFPNDT5-P[3-6/0.01]-L[0-10/1]-B[2-10/0.1]-T[1-10/0.5]
GFPNDT6-P[4-7/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-10/0.5]
GFPNDT8-P[5-9/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-10/0.5]
GFPNDT10-P[7-11/0.01]-L[0-25/1]-B[3-20/0.1]-T[1-10/0.5]
GFPNDT12-P[7-12/0.01]-L[0-25/1]-B[3-20/0.1]-T[1-10/0.5]
GFPNDT16-P[13-16/0.01]-L[0-30/1]-B[5-20/0.1]-T[1-10/0.5]
GFPNDT20-P[16-20/0.01]-L[0-30/1]-B[5-20/0.1]-T[1-10/0.5]
GFPNDTD3-P[2-4/0.01]-L[0-6/1]-B[2-10/0.1]-T[1-15/0.1]-H[6-12/0.5]
GFPNDTD4-P[2-5/0.01]-L[0-8/1]-B[2-10/0.1]-T[1-15/0.1]-H[7-13/0.5]
GFPNDTD5-P[3-6/0.01]-L[0-10/1]-B[2-10/0.1]-T[1-15/0.1]-H[8-14/0.5]
GFPNDTD6-P[4-7/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[9-15/0.5]
GFPNDTD8-P[5-9/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-15/0.1]-H[11-17/0.5]
GFPNDTD10-P[7-11/0.01]-L[0-15/1]-B[3-25/0.1]-T[1-15/0.1]-H[13-19/0.5]
GFPNDTD12-P[7-12/0.01]-L[0-15/1]-B[3-25/0.1]-T[1-15/0.1]-H[13-20/0.5]
GFPNDTD16-P[13-16/0.01]-L[0-20/1]-B[5-30/0.1]-T[1-15/0.1]-H[18-24/0.5]
GFPNDTD20-P[16-20/0.01]-L[0-20/1]-B[5-30/0.1]-T[1-15/0.1]-H[21-27/0.5]
HFPNDT3-P[2-4/0.01]-L[0-6/1]-B[2-10/0.1]-T[1-10/0.5]
HFPNDT4-P[2-5/0.01]-L[0-8/1]-B[2-10/0.1]-T[1-10/0.5]
HFPNDT5-P[3-6/0.01]-L[0-10/1]-B[2-10/0.1]-T[1-10/0.5]
HFPNDT6-P[4-7/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-10/0.5]
HFPNDT8-P[5-9/0.01]-L[0-10/1]-B[2-15/0.1]-T[1-10/0.5]
HFPNDT10-P[7-11/0.01]-L[0-25/1]-B[3-20/0.1]-T[1-10/0.5]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSShape (Head, Outline View) Material Surface Treatment Heat Treatment [D] Diameter (Mounting Side)
(mm) 		B H L P T

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched32 ～ 10-0 ～ 62 ～ 41 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched42 ～ 10-0 ～ 82 ～ 51 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched52 ～ 10-0 ～ 103 ～ 61 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched62 ～ 15-0 ～ 104 ～ 71 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched82 ～ 15-0 ～ 105 ～ 91 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched103 ～ 20-0 ～ 257 ～ 111 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched123 ～ 20-0 ～ 257 ～ 121 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched165 ～ 20-0 ～ 3013 ～ 161 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched205 ～ 20-0 ～ 3016 ～ 201 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched32 ～ 106 ～ 120 ～ 62 ～ 41 ～ 15

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched42 ～ 107 ～ 130 ～ 82 ～ 51 ～ 15

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched52 ～ 108 ～ 140 ～ 103 ～ 61 ～ 15

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched62 ～ 159 ～ 150 ～ 104 ～ 71 ～ 15

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched82 ～ 1511 ～ 170 ～ 105 ～ 91 ～ 15

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched103 ～ 2513 ～ 190 ～ 157 ～ 111 ～ 15

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched123 ～ 2513 ～ 200 ～ 157 ～ 121 ～ 15

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched165 ～ 3018 ～ 240 ～ 2013 ～ 161 ～ 15

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4037 Equiv.No TreatmentDirectly Quenched205 ～ 3021 ～ 270 ～ 2016 ～ 201 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched32 ～ 10-0 ～ 62 ～ 41 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched42 ～ 10-0 ～ 82 ～ 51 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched52 ～ 10-0 ～ 103 ～ 61 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched62 ～ 15-0 ～ 104 ～ 71 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched82 ～ 15-0 ～ 105 ～ 91 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched103 ～ 20-0 ～ 257 ～ 111 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched123 ～ 20-0 ～ 257 ～ 121 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched165 ～ 20-0 ～ 3013 ～ 161 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched205 ～ 20-0 ～ 3016 ～ 201 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched32 ～ 106 ～ 120 ～ 62 ～ 41 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched42 ～ 107 ～ 130 ～ 82 ～ 51 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched52 ～ 158 ～ 140 ～ 103 ～ 61 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched62 ～ 159 ～ 150 ～ 104 ～ 71 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched82 ～ 1511 ～ 170 ～ 105 ～ 91 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched103 ～ 2513 ～ 190 ～ 157 ～ 111 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched123 ～ 2513 ～ 200 ～ 157 ～ 121 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched165 ～ 3018 ～ 240 ～ 2013 ～ 161 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.No TreatmentDirectly Quenched205 ～ 3021 ～ 270 ～ 2016 ～ 201 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched32 ～ 10-0 ～ 62 ～ 41 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched42 ～ 10-0 ～ 82 ～ 51 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched52 ～ 10-0 ～ 103 ～ 61 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched62 ～ 15-0 ～ 104 ～ 71 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched82 ～ 15-0 ～ 105 ～ 91 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched103 ～ 20-0 ～ 257 ～ 111 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched123 ～ 20-0 ～ 257 ～ 121 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched165 ～ 20-0 ～ 3013 ～ 161 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched205 ～ 20-0 ～ 3016 ～ 201 ～ 10

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched32 ～ 106 ～ 120 ～ 62 ～ 41 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched42 ～ 107 ～ 130 ～ 82 ～ 51 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched52 ～ 108 ～ 140 ～ 103 ～ 61 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched62 ～ 159 ～ 150 ～ 104 ～ 71 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched82 ～ 1511 ～ 170 ～ 105 ～ 91 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched103 ～ 2513 ～ 190 ～ 157 ～ 111 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched123 ～ 2513 ～ 200 ～ 157 ～ 121 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched165 ～ 3018 ～ 240 ～ 2013 ～ 161 ～ 15

-

1 6 Days 10Diamond[Steel] EN 1.2510 Equiv.[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenched205 ～ 3021 ～ 270 ～ 2016 ～ 201 ～ 15

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4301 Equiv.[Hard Chrome Plating] Hard Chrome PlatingNo Treatment32 ～ 10-0 ～ 62 ～ 41 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4301 Equiv.[Hard Chrome Plating] Hard Chrome PlatingNo Treatment42 ～ 10-0 ～ 82 ～ 51 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4301 Equiv.[Hard Chrome Plating] Hard Chrome PlatingNo Treatment52 ～ 10-0 ～ 103 ～ 61 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4301 Equiv.[Hard Chrome Plating] Hard Chrome PlatingNo Treatment62 ～ 15-0 ～ 104 ～ 71 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4301 Equiv.[Hard Chrome Plating] Hard Chrome PlatingNo Treatment82 ～ 15-0 ～ 105 ～ 91 ～ 10

-

1 6 Days 10Diamond[Stainless Steel] EN 1.4301 Equiv.[Hard Chrome Plating] Hard Chrome PlatingNo Treatment103 ～ 20-0 ～ 257 ～ 111 ～ 10

Loading...

  1. 1
  2. 2
  3. Next >>

Basic information

Type (Basic Shape) Shouldered Shape (Head, Tip View) Tapered Shape (Head, Mounting Method) N/A
Type (Mounting Side) External Thread ISO Tolerance (Mounting Side) g6 ISO Tolerance (Head) 0/-0.01

Configure

Clear all

90Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
      • EN 1.2510 Equiv.
    • Stainless Steel
      • EN 1.4037 Equiv.
      • EN 1.4301 Equiv.

    Clear

  • Surface Treatment

    • No Treatment
    • Hard Chrome Plating
      • Hard Chrome Plating

    Clear

  • Heat Treatment

    • No Treatment
    • Directly Quenched

    Clear

  • [D] Diameter (Mounting Side)(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • B

     [2-30/0.1]

    Clear

  • H

     [6-27/0.5]

    Clear

  • L

     [0-30/1]

    Clear

  • P

     [2-12/0.01][13-20/0.01]

    Clear

  • T

     [1-15/0.1][1-10/0.5]

    Clear

  • Type

    • CFPNAT
    • CFPNATD
    • CFPNDT
    • CFPNDTD
    • FPNAT
    • FPNATD
    • FPNDT
    • FPNDTD
    • GFPNAT
    • GFPNATD
    • GFPNDT
    • GFPNDTD
    • HFPNAT
    • HFPNATD
    • HFPNDT
    • HFPNDTD
    • SFPNAT
    • SFPNATD
    • SFPNDT
    • SFPNDTD

    Clear

  • Shape (Head, Outline View)

    • Round
    • Diamond

    Clear

  • Filter by CAD data type

    • 2D

    Clear

Filter by standard shipping days

    • All
    • 6 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.