XAC series carbide square end mill, 2-flute / short model (XAC-PEM2S4)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: XAC-PEM2S4
Brand: MISUMI
Price: 21.32 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 4 φ
Flute Length (ℓ): 11 mm
Shank Diameter (d): 6 mm
Overall Length (L): 45 mm
Figure: 1
- TiAlN
- General Steel
- 2 Flutes
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
XAC-PEM2S4
Part Number
|
|---|
| XAC-PEM2S4 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|---|
21.32 € | 1 | Available | 5 Days | 4 | 11 | 6 | 45 | 1 |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||
| XAC-PEM2S | 1 | 2.5 | 40 | 4 | 1 |
| 1.2 | 4 | 40 | 4 | 1 | |
| 1.5 | 4 | 40 | 4 | 1 | |
| 2 | 6 | 40 | 4 | 1 | |
| 2.5 | 8 | 40 | 4 | 1 | |
| 3 | 8 | 45 | 6 | 1 | |
| 4 | 11 | 45 | 6 | 1 | |
| 5 | 13 | 50 | 6 | 1 | |
| 6 | 13 | 50 | 6 | 2 | |
| 8 | 19 | 60 | 8 | 2 | |
| 10 | 22 | 70 | 10 | 2 | |
| 12 | 26 | 75 | 12 | 2 | |
| 14 | 26 | 85 | 14 | 2 | |
| 16 | 32 | 100 | 16 | 2 | |
| 20 | 38 | 105 | 20 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● A general-purpose 2-flute end mill for a wide range of applications.
● The blade tip has a sharp edge allowing corner edges also to be machined.
Basic information
| Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Square |
|---|---|---|---|---|---|
| Coating | TiAlN | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Geometry | Sharp Corner |
| Torsion Angle (θ) | Standard Helix (30 to 40°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | ● |
This page is XAC series carbide square end mill, 2-flute / short model, part number XAC-PEM2S4.
You can find the detail information about specifications and dimensions on part number XAC-PEM2S4.
Configure
Basic Attributes
-
Type
- XAC-PEM2S
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| XAC-PEM2S10 |
| XAC-PEM2S12 |
| XAC-PEM2S14 |
| XAC-PEM2S5 |
| XAC-PEM2S6 |
| XAC-PEM2S8 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Figure |
|---|---|---|---|---|---|---|---|---|---|
41.34 € | 1 | Available | 5 Days | 10 | 22 | 10 | 70 | 2 | |
62.03 € | 1 | Available | 5 Days | 12 | 26 | 12 | 75 | 2 | |
123.42 € | 1 | Available | 5 Days | 14 | 26 | 14 | 85 | 2 | |
21.34 € | 1 | Available | 5 Days | 5 | 13 | 6 | 50 | 1 | |
19.77 € | 1 | Available | 5 Days | 6 | 13 | 6 | 50 | 2 | |
33.19 € | 1 | Available | 5 Days | 8 | 19 | 8 | 60 | 2 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.