TSC series carbide square end mill, 2-flute / 2.5D Flute Length model (TSC-EM2SR10)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: TSC-EM2SR10
Brand: MISUMI
Price: 40.93 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 10 φ
Flute Length (ℓ): 25 mm
Shank Diameter (d): 10 mm
Overall Length (L): 80 mm
Length Under Neck (ℓ1): - mm
- TS
- General Steel
- 2 Flutes
- SR
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-EM2SR10
Part Number
|
|---|
| TSC-EM2SR10 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
40.93 € | 1 | Available | 5 Days | 10 | 25 | 10 | 80 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 2 | ● |
Loading...
Specifications
Model Number
TSC-EM2SR (Standard) / TSC-PEM2SR (Sharp Edge)
| Outer Diameter D |
Shank Diameter d |
Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | ● Stocked Product □ Manufactured Product |
| 0.5 | - | 4 | 1.25 | 45 | 1 | ● |
| 1 | - | 4 | 2.5 | 45 | 1 | ● |
| 1.5 | - | 4 | 3.75 | 45 | 1 | ● |
| 2 | - | 4 | 5 | 45 | 1 | ● |
| 2 | 6 | 6 | 5 | 45 | 1 | ● |
| 2.5 | - | 4 | 6.25 | 45 | 1 | ● |
| 3 | - | 6 | 7.5 | 45 | 1 | ● |
| 3.51 ~ 3.99 | - | 6 | 10 | 50 | 1 | □ |
| 4 | - | 6 | 10 | 50 | 1 | ● |
| 4.51 ~ 4.99 | - |
6 |
12.5 | 55 | 1 | □ |
| 5 | - |
6 |
12.5 | 55 | 1 | ● |
| 5.51 ~ 5.99 | - |
6 |
15 | 60 | 1 | □ |
| 6 | - |
6 |
15 | 60 | 2 | ● |
| 7.51 ~ 7.99 | - |
8 |
20 | 70 | 1 | □ |
| 8 | - |
8 |
20 | 70 | 2 | ● |
| 9.51 ~ 9.99 | - |
10 |
25 | 80 | 1 | □ |
| 10 | - |
10 |
25 | 80 | 2 | ● |
| 11.51 ~ 11.99 | - |
12 |
30 | 85 | 1 | □ |
| 12 | - |
12 |
30 | 85 | 2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● The flute length is between that of short flutes and regular flutes, with a 2.5 times larger flute diameter.
Basic information
| Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | 0 ~ -0.02 |
This page is TSC series carbide square end mill, 2-flute / 2.5D Flute Length model, part number TSC-EM2SR10.
You can find the detail information about specifications and dimensions on part number TSC-EM2SR10.
Configure
Basic Attributes
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
- Countersunk
-
Type
- SN-TSC-EM2SR
- SN-TSC-PEM2SR
- SNR-TSC-EM2SR
- SNR-TSC-PEM2SR
- TSC-EM2SR
- TSC-PEM2SR
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Geometry
- Sharp Corner
- With Lead
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
Filter by standard shipping days
-
- All
- 5 Days or Less
- 7 Days or Less
- 8 Days or Less
- 13 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-EM2SR0.5 |
| TSC-EM2SR1 |
| TSC-EM2SR1.5 |
| TSC-EM2SR12 |
| TSC-EM2SR2 |
| TSC-EM2SR2.5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
14.59 € | 1 | Available | 5 Days | 0.5 | 1.25 | 4 | 45 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 1 | ● | |
13.33 € | 1 | Available | 5 Days | 1 | 2.5 | 4 | 45 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 1 | ● | |
14.50 € | 1 | Available | 5 Days | 1.5 | 3.75 | 4 | 45 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 1 | ● | |
60.88 € | 1 | Available | 5 Days | 12 | 30 | 12 | 85 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 2 | ● | |
13.69 € | 1 | Available | 5 Days | 2 | 5 | 4 | 45 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 1 | ● | |
14.57 € | 1 | Available | 5 Days | 2.5 | 6.25 | 4 | 45 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 1 | ● |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.