TSC series carbide square end mill, 4-flute / 2.5D Flute Length model (Part Numbers)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Slot length is 2.5 times the cutting edge diameter between short and regular flutes
-Optimal for machining in low to medium rotation range due to universal 30° helix angle
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
- TS
- General Steel
- 4 Flutes
- SR
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-EM4SR10
Part Number
|
|---|
| TSC-EM4SR10 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
57.55 € | 1 | Available | 5 Days | 10 | 25 | 10 | 80 | - | With Lead | Stocked Product | 2 | ● |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||
| TSC-EM4SR (Standard) TSC-PEM4SR (Sharp Edge) |
1 | 2.5 | 45 | 4 | 1 |
| 1.5 | 3.75 | 45 | 4 | 1 | |
| 2 | 5 | 45 | 4 | 1 | |
| 3 | 7.5 | 45 | 6 | 1 | |
| 4 | 10 | 50 | 6 | 1 | |
| 5 | 12.5 | 55 | 6 | 1 | |
| 6 | 15 | 60 | 6 | 2 | |
| 7 | 17.5 | 65 | 8 | 1 | |
| 8 | 20 | 70 | 8 | 2 | |
| 9 | 22.5 | 75 | 10 | 1 | |
| 10 | 25 | 80 | 10 | 2 | |
| 12 | 30 | 85 | 12 | 2 | |
| 16 | 40 | 105 | 16 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
●The flute length is between that of short flutes and regular flutes, with a 2.5 times larger flute diameter.
Basic information
| Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Torsion Angle (θ) | Standard Helix (30 to 40°) |
| Tolerance of OD(mm) | 0 ~ -0.02 |
This page is TSC series carbide square end mill, 4-flute / 2.5D Flute Length model, part number TSC-EM4SR10.
You can find the detail information about specifications and dimensions on part number TSC-EM4SR10.
Configure
Basic Attributes
-
Length Under Neck (ℓ1)(mm)
-
Type
- SN-TSC-EM4SR
- SN-TSC-PEM4SR
- SNR-TSC-EM4SR
- SNR-TSC-PEM4SR
- TSC-EM4SR
- TSC-PEM4SR
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Geometry
- Sharp Corner
- With Lead
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
Filter by standard shipping days
-
- All
- 5 Days or Less
- 7 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-EM4SR1 |
| TSC-EM4SR1.5 |
| TSC-EM4SR12 |
| TSC-EM4SR16 |
| TSC-EM4SR2 |
| TSC-EM4SR3 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
21.94 € | 1 | Available | 5 Days | 1 | 2.5 | 4 | 45 | - | With Lead | Stocked Product | 1 | ● | |
21.94 € | 1 | Available | 5 Days | 1.5 | 3.75 | 4 | 45 | - | With Lead | Stocked Product | 1 | ● | |
71.94 € | 1 | Available | 5 Days | 12 | 30 | 12 | 85 | - | With Lead | Stocked Product | 2 | ● | |
124.13 € | 1 | Available | 5 Days | 16 | 40 | 16 | 105 | - | With Lead | Stocked Product | 2 | ● | |
21.04 € | 1 | Available | 5 Days | 2 | 5 | 4 | 45 | - | With Lead | Stocked Product | 1 | ● | |
26.40 € | 1 | Available | 5 Days | 3 | 7.5 | 6 | 45 | - | With Lead | Stocked Product | 1 | ● |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.